[Kinect]XBox One Kinect連接Windows


     注:本文全原創,作者:Noah Zhang  (http://www.cnblogs.com/noahzn/)

 

    XBox One帶體感套裝去年就買了,昨天京東349元入了個適配器,下午就送到了,開箱。

 

 

 

    按照說明書把Kinect通過適配器連接電腦,我是Win10操作系統。

 

    官方給出的硬件要求如下:

Your computer must have the following minimum capabilities:

  • 64 bit (x64) processor
  • 4 GB Memory (or more)
  • I7 3.1 GHz (or higher)
  • Built-in USB 3.0 host controller (Intel or Renesas chipset).   (電腦要有USB3.0接口)

    If you're adding USB 3.0 functionality to your existing PC through an adapter, please ensure that it is a Windows 8 compliant device and that it supports Gen-2. See the troubleshooting section of Getting Started for more information.

  • DX11 capable graphics adapter (see list of known good adapters below)   (支持DX11的顯卡,我用的是HD5770)
    • Intel HD 4400 integrated display adapter
    • ATI Radeon HD 5400 series
    • ATI Radeon HD 6570
    • ATI Radeon HD 7800 (256-bit GDDR5 2GB/1000Mhz)
    • NVidia Quadro 600
    • NVidia GeForce GT 640
    • NVidia GeForce GTX 660
    • NVidia Quadro K1000M
  • A Kinect v2 sensor, which includes a power hub and USB cabling.

 

    連接之后,會自動安裝驅動程序,裝完之后,下載Kinect for Windows SDK2.0並安裝

          (鏈接: http://pan.baidu.com/s/1ca7zwM 密碼: 7n5u)

    安裝完畢后,打開Kinect Studio,記得先連接設備哦~

 

    然后就可以看到Kinect采集的畫面了。

 

 

    也可以打開SDK Browser,看看深度圖像。

 


免責聲明!

本站轉載的文章為個人學習借鑒使用,本站對版權不負任何法律責任。如果侵犯了您的隱私權益,請聯系本站郵箱yoyou2525@163.com刪除。



 
粵ICP備18138465號   © 2018-2025 CODEPRJ.COM