AP設置
1.將AP 調整為fit ap。、
AC設置
1.划分用戶vlan管理vlan，給vlan增加虛擬地址
vlan batch 200 1000
interface Vlan-interface200
ip address 10.0.200.1 255.255.252.0
interface Vlan-interface1000
ip address 10.0.2.200 255.255.255.0
2.開啟DHCP服務，增加地址池 。**
dhcp en
dhcp server ip-pool vlan200
gateway-list 10.0.200.1
network 10.0.200.0 mask 255.255.252.0
dns-list 223.5.5.5 114.114.114.114
expired day 0 hour 3 //租期時間3小時
3.設置無線組，可以增加多個。**
wlan service-template 1
ssid GALLERIA //無線WiFi名稱 GALLERIA
vlan 200
akm mode psk
preshared-key pass-phrase sim 88888888 //無線WiFi密碼88888888
cipher-suite ccmp
security-ie rsn
security-ie wpa
service-template enable
4.上聯接口設置***
interface GigabitEthernet1/0/5
port link-mode route
ip address dhcp-alloc
nat outbound
undo dhcp select server
5.默認路由為下一跳地址(是對外出口)
ip route-static 0.0.0.0 0 10.0.200.1
6.將AC改為自動獲取ap,並需要認證固化。***
wlan auto-ap enable
wlan auto-persistent enable
wlan ap-authentication enable
7.開啟默認組ap,開啟天線輻射
wlan ap-group default-group
provision auto-update enable
vlan 1
ap-model WAP722E
radio 1
radio enable
service-template 1
radio 2
radio enable
service-template 1
8.上線ap,綁定service-template
wlan ap XXXX-XXXX-XXXX model WAP722E
serial-id 219801A0Q29177G000BD
vlan 1
radio 1
service-template 1
radio 2
service-template 1