AP设置
1.将AP 调整为fit ap。、
AC设置
1.划分用户vlan管理vlan，给vlan增加虚拟地址
vlan batch 200 1000
interface Vlan-interface200
ip address 10.0.200.1 255.255.252.0
interface Vlan-interface1000
ip address 10.0.2.200 255.255.255.0
2.开启DHCP服务，增加地址池 。**
dhcp en
dhcp server ip-pool vlan200
gateway-list 10.0.200.1
network 10.0.200.0 mask 255.255.252.0
dns-list 223.5.5.5 114.114.114.114
expired day 0 hour 3 //租期时间3小时
3.设置无线组，可以增加多个。**
wlan service-template 1
ssid GALLERIA //无线WiFi名称 GALLERIA
vlan 200
akm mode psk
preshared-key pass-phrase sim 88888888 //无线WiFi密码88888888
cipher-suite ccmp
security-ie rsn
security-ie wpa
service-template enable
4.上联接口设置***
interface GigabitEthernet1/0/5
port link-mode route
ip address dhcp-alloc
nat outbound
undo dhcp select server
5.默认路由为下一跳地址(是对外出口)
ip route-static 0.0.0.0 0 10.0.200.1
6.将AC改为自动获取ap,并需要认证固化。***
wlan auto-ap enable
wlan auto-persistent enable
wlan ap-authentication enable
7.开启默认组ap,开启天线辐射
wlan ap-group default-group
provision auto-update enable
vlan 1
ap-model WAP722E
radio 1
radio enable
service-template 1
radio 2
radio enable
service-template 1
8.上线ap,绑定service-template
wlan ap XXXX-XXXX-XXXX model WAP722E
serial-id 219801A0Q29177G000BD
vlan 1
radio 1
service-template 1
radio 2
service-template 1