[BD 5-336] This command cannot be run, as the BD-design is locked. Locked reason(s):
* BD design contains locked IPs. Please run report_ip_status for more details and recommendations on how to fix this issue.
具體原因為--找不到tpg這個ip的lisence
在網上找了一個lisence，加載以后就沒有報錯了
參考：https://www.cnblogs.com/runningsoybean/p/10234495.html
https://download.csdn.net/download/upandi/10642213?utm_medium=distribute.pc_relevant_t0.none-task-download-BlogCommendFromMachineLearnPai2-1.nonecase&depth_1-utm_source=distribute.pc_relevant_t0.none-task-download-BlogCommendFromMachineLearnPai2-1.nonecase
https://blog.csdn.net/qiuzhongweiwei/article/details/78528006?ops_request_misc=&request_id=&biz_id=102&utm_term=vivado%20ip&utm_medium=distribute.pc_search_result.none-task-blog-2~all~sobaiduweb~default-2-78528006
找不到頂層模塊
Generate Bitstream報錯[DRC NSTD-1]
報錯如下
[Drc 23-20] Rule violation (NSTD-1) Unspecified I/O Standard - 4 out of 142 logical ports use I/O standard (IOSTANDARD) value 'DEFAULT', instead of a user assigned specific value. This may cause I/O contention or incompatibility with the board power or connectivity affecting performance, signal integrity or in extreme cases cause damage to the device or the components to which it is connected. To correct this violation, specify all I/O standards. This design will fail to generate a bitstream unless all logical ports have a user specified I/O standard value defined. To allow bitstream creation with unspecified I/O standard values (not recommended), use this command: set_property SEVERITY {Warning} [get_drc_checks NSTD-1]. NOTE
: When using the Vivado Runs infrastructure (e.g. launch_runs Tcl command), add this command to a .tcl file and add that file as a pre-hook for write_bitstream step for the implementation run. Problem ports: USBIND_0_port_indctl[1:0], USBIND_0_vbus_pwrfault, USBIND_0_vbus_pwrselect.
新建記事本，添加以下三句：
set_property SEVERITY {Warning} [get_drc_checks NSTD-1]
set_property SEVERITY {Warning} [get_drc_checks RTSTAT-1]
set_property SEVERITY {Warning} [get_drc_checks UCIO-1]
重命名為 name.tcl文件（確定后綴格式有效）
在generate bitstream 界面如下，右鍵進入setting
將新建的.tcl文件添加進來，再一次Generate bitstream
轉自：https://blog.csdn.net/qq_41634276/article/details/82750794
