abaqus6.14導出網格inp以及導入inp以建模

本文轉載自查看原文 2018-06-10 16:48 6544 abaqus/ 有限元/ 建模

建好part，組裝后，划分網格，然后建立job，之后write input就可以在工作目錄生成剛才新建網格的單元和節點編號信息了。

 1 *Heading
 2 ** Job name: buildmodel Model name: Model-1
 3 ** Generated by: Abaqus/CAE 6.14-1
 4 *Preprint, echo=NO, model=NO, history=NO, contact=NO
 5 **
 6 ** PARTS
 7 **
 8 *Part, name=Part-1
 9 *Node
10       1,          25.,          15.,           5.
11       2,          25.,          10.,           5.
12       3,          25.,           5.,           5.
13       4,          25.,           0.,           5.
14       5,          25.,          15.,           0.
15       6,          25.,          10.,           0.
16       7,          25.,           5.,           0.
17       8,          25.,           0.,           0.
18       9,          20.,          15.,           5.
19      10,          20.,          10.,           5.
20      11,          20.,           5.,           5.
21      12,          20.,           0.,           5.
22      13,          20.,          15.,           0.
23      14,          20.,          10.,           0.
24      15,          20.,           5.,           0.
25      16,          20.,           0.,           0.
26      17,          15.,          15.,           5.
27      18,          15.,          10.,           5.
28      19,          15.,           5.,           5.
29      20,          15.,           0.,           5.
30      21,          15.,          15.,           0.
31      22,          15.,          10.,           0.
32      23,          15.,           5.,           0.
33      24,          15.,           0.,           0.
34      25,          10.,          15.,           5.
35      26,          10.,          10.,           5.
36      27,          10.,           5.,           5.
37      28,          10.,           0.,           5.
38      29,          10.,          15.,           0.
39      30,          10.,          10.,           0.
40      31,          10.,           5.,           0.
41      32,          10.,           0.,           0.
42      33,           5.,          15.,           5.
43      34,           5.,          10.,           5.
44      35,           5.,           5.,           5.
45      36,           5.,           0.,           5.
46      37,           5.,          15.,           0.
47      38,           5.,          10.,           0.
48      39,           5.,           5.,           0.
49      40,           5.,           0.,           0.
50      41,           0.,          15.,           5.
51      42,           0.,          10.,           5.
52      43,           0.,           5.,           5.
53      44,           0.,           0.,           5.
54      45,           0.,          15.,           0.
55      46,           0.,          10.,           0.
56      47,           0.,           5.,           0.
57      48,           0.,           0.,           0.
58 *Element, type=C3D8R
59  1,  9, 10, 14, 13,  1,  2,  6,  5
60  2, 10, 11, 15, 14,  2,  3,  7,  6
61  3, 11, 12, 16, 15,  3,  4,  8,  7
62  4, 17, 18, 22, 21,  9, 10, 14, 13
63  5, 18, 19, 23, 22, 10, 11, 15, 14
64  6, 19, 20, 24, 23, 11, 12, 16, 15
65  7, 25, 26, 30, 29, 17, 18, 22, 21
66  8, 26, 27, 31, 30, 18, 19, 23, 22
67  9, 27, 28, 32, 31, 19, 20, 24, 23
68 10, 33, 34, 38, 37, 25, 26, 30, 29
69 11, 34, 35, 39, 38, 26, 27, 31, 30
70 12, 35, 36, 40, 39, 27, 28, 32, 31
71 13, 41, 42, 46, 45, 33, 34, 38, 37
72 14, 42, 43, 47, 46, 34, 35, 39, 38
73 15, 43, 44, 48, 47, 35, 36, 40, 39
74 *End Part
75 **  
76 **
77 ** ASSEMBLY
78 **
79 *Assembly, name=Assembly
80 **  
81 *Instance, name=Part-1-1, part=Part-1
82 *End Instance
83 **  
84 *End Assembly

buildModel.inp

導入inp以建模：

免責聲明！

本站轉載的文章為個人學習借鑒使用，本站對版權不負任何法律責任。如果侵犯了您的隱私權益，請聯系本站郵箱yoyou2525@163.com刪除。

猜您在找 ABAQUS inp文件加密 Abaqus的inp文件用什么編輯器好？ abaqus修改inp直接建立工程 Abaqus輸入文件INP解釋 - 引自《ABAQUS工程實例詳解》 Abaqus剛體建模方法 abaqus重新划分網格 linux ubuntu下abaqus-6.14安裝破解完全指南 MCNP xsdir中設置XS文件路徑並運行一個inp例子 abaqus復合材料建模仿真 ABAQUS切削快速建模python程序