DHCP（Dynamic Host Configuration Protocal）工作模式為服務器/客戶端；
DHCP主要用於自動為客戶端分配網卡信息，比如自動分配IP、網關等。
准備三台虛擬機，主機名分別為PC1、PC2和PC3，均為RHEL7，PC1作為服務器，PC2和PC3作為客戶端。
1、查看服務器PC1系統版本，ip信息
[root@PC1 ~]# cat /etc/redhat-release ## 查看系統版本 Red Hat Enterprise Linux Server release 7.0 (Maipo) [root@PC1 ~]# ifconfig | head -n 3 ## 查看ip地址 eno16777728: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.10.10 netmask 255.255.255.255 broadcast 192.168.10.10 inet6 fe80::20c:29ff:fe66:37f7 prefixlen 64 scopeid 0x20<link>
2、安裝DHCP服務（前提是已經配置好yum倉庫）
[root@PC1 ~]# yum install dhcp Loaded plugins: langpacks, product-id, subscription-manager Is this ok [y/d/N]: y Downloading packages: ……………… Installed: dhcp.x86_64 12:4.2.5-27.el7 Complete!
3、DHCP配置文件位置
[root@PC1 dhcp]# pwd /etc/dhcp [root@PC1 dhcp]# ls dhclient.d dhcpd6.conf dhcpd.conf
4、DHCP配置文件中常見參數作用
5、修改配置文件
[root@PC1 dhcp]# vim /etc/dhcp/dhcpd.conf ## ip地址范圍為50-150 ddns-update-style none; ignore client-updates; subnet 192.168.10.0 netmask 255.255.255.0 { range 192.168.10.50 192.168.10.150; option subnet-mask 255.255.255.0; option routers 192.168.10.1; option domain-name "linuxprobe.com"; option domain-name-servers 192.168.10.1; default-lease-time 21600; max-lease-time 43200; }
各參數意義：
6、重啟服務器PC1的DHCP服務，是配置文件生效，並設定開機自動啟動服務
[root@PC1 dhcp]# systemctl restart dhcpd [root@PC1 dhcp]# systemctl enable dhcpd ln -s '/usr/lib/systemd/system/dhcpd.service' '/etc/systemd/system/multi-user.target.wants/dhcpd.service'
[root@PC1 dhcp]# systemctl status dhcpd | head -n 5 ## 查看服務狀態 dhcpd.service - DHCPv4 Server Daemon Loaded: loaded (/usr/lib/systemd/system/dhcpd.service; enabled) Active: active (running) since Wed 2020-12-02 18:47:16 CST; 2min 10s ago Docs: man:dhcpd(8) man:dhcpd.conf(5)
7、開啟客戶機PC2進行驗證
[root@PC2 Desktop]# ifconfig | head -n 3 ## 查看當前ip，未分配 eno16777728: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 ether 00:0c:29:25:bb:3e txqueuelen 1000 (Ethernet) RX packets 22 bytes 1320 (1.2 KiB) [root@PC2 Desktop]# vim /etc/sysconfig/network-scripts/ifcfg-eno16777728 ## 編輯網卡配置文件，設為開機自動啟動 HWADDR=00:0C:29:25:BB:3E TYPE=Ethernet BOOTPROTO=dhcp DEFROUTE=yes PEERDNS=yes PEERROUTES=yes IPV4_FAILURE_FATAL=no IPV6INIT=yes IPV6_AUTOCONF=yes IPV6_DEFROUTE=yes IPV6_PEERDNS=yes IPV6_PEERROUTES=yes IPV6_FAILURE_FATAL=no NAME=eno16777728 UUID=a0c2aa6b-48e1-4822-a67c-151155cc14bd ONBOOT=yes [root@PC2 Desktop]# systemctl restart network ## 重啟網卡 [root@PC2 Desktop]# ifconfig | head -n 3 ## 再次查看ip eno16777728: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.10.51 netmask 255.255.255.0 broadcast 192.168.10.255 inet6 fe80::20c:29ff:fe25:bb3e prefixlen 64 scopeid 0x20<link>
8、開啟客戶機PC3進行驗證
[root@PC3 Desktop]# ifconfig | head -n 3 ## 查看當前ip eno16777728: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 ether 00:0c:29:7d:e7:11 txqueuelen 1000 (Ethernet) RX packets 11 bytes 660 (660.0 B) [root@PC3 Desktop]# vim /etc/sysconfig/network-scripts/ifcfg-eno16777728 ## 編輯網卡配置文件，設為開機自動啟動 HWADDR=00:0C:29:7D:E7:11 TYPE=Ethernet BOOTPROTO=dhcp DEFROUTE=yes PEERDNS=yes PEERROUTES=yes IPV4_FAILURE_FATAL=no IPV6INIT=yes IPV6_AUTOCONF=yes IPV6_DEFROUTE=yes IPV6_PEERDNS=yes IPV6_PEERROUTES=yes IPV6_FAILURE_FATAL=no NAME=eno16777728 UUID=39fd8d2f-8276-4732-9207-1bf1942f91f9 ONBOOT=yes [root@PC3 Desktop]# systemctl restart network ## 重啟網卡 [root@PC3 Desktop]# ifconfig | head -n 3 ## 查看ip eno16777728: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.10.52 netmask 255.255.255.0 broadcast 192.168.10.255 inet6 fe80::20c:29ff:fe7d:e711 prefixlen 64 scopeid 0x20<link>
總結：
- 服務器與客戶機無需特殊處理，可以實現自動關聯
- 客戶機重啟網卡，才可以實現自動被分配IP