vlan1：1-5
vlan2：6-10
vlan3：11-22
[S1]vlan batch 2 3
[S1]interface GigabitEthernet 0/0/1
[S1-GigabitEthernet0/0/1]port link-type trunk
[S1-GigabitEthernet0/0/1]port trunk allow-pass vlan all
[S1-GigabitEthernet0/0/1]q
[S1]interface GigabitEthernet 0/0/2
[S1-GigabitEthernet0/0/2]port link-type trunk
[S1-GigabitEthernet0/0/2]port trunk allow-pass vlan all
[S2]vlan batch 2 3
[S2]port-group vlan1port
[S2-port-group-vlan1port]group-member Ethernet 0/0/1 to Ethernet 0/0/5 將交換機接口指定到相應的VLAN
[S2-port-group-vlan1port]port link-type access
[S2-port-group-vlan1port]port default vlan 1
[S2-port-group-vlan1port]q
[S2]port-group vlan2port
[S2-port-group-vlan2port]group-member Ethernet 0/0/6 to Ethernet 0/0/10
[S2-port-group-vlan2port]port link-type access
[S2-port-group-vlan2port]port default vlan 2
[S2-port-group-vlan2port]q
[S2]port-group vlan3port
[S2-port-group-vlan3port]group-member Ethernet 0/0/11 to Ethernet 0/0/22
[S2-port-group-vlan3port]port link-type access
[S2-port-group-vlan3port]port default vlan 3
[S2-port-group-vlan3port]q
[S2]interface GigabitEthernet 0/0/1
[S2-GigabitEthernet0/0/1]port link-type trunk 將交換機之間的連接鏈路設置成干道鏈路
[S2-GigabitEthernet0/0/1]port trunk allow-pass vlan all
S3交換機同S2配置相同。。。
配置完成后，各vlanpc相互ping通；vlan間pc不通
附：
顯示接口所屬的VLAN
<S3>display port vlan
注意：
華為交換機當把某個vlan刪除后，那么vlan下的端口會變為默認vlan1
思科交換機當把某個vlan刪除后，那么vlan下的端口就不顯示了（不存在）