華為三層交換機配置基於接口划分vlan

組網需求：匯聚層交換機做為 PC 電腦的網關，通過配置實現各PC 電腦之間的互訪通信：

PC1設置IP為192.168.10.2，網關為 vlanif 10接口地址192.168.10.1/24;

PC2設置IP為192.168.20.2，網關為 vlanif 20 接口地址 192.168.20.1/24；

PC3設置IP為192.168.30.2，網關為 vlanif 30 接口地址 192.168.30.1/24；

 

配置SW1：

<Huawei>system-view
[Huawei]sysname SW1
[SW1]vlan batch 10 20 30

[SW1]int vlan 10
[SW1-Vlanif10]ip address 192.168.10.1 24
[SW1-Vlanif10]q

[SW1]int vlan 20
[SW1-Vlanif20]ip address 192.168.20.1 24
[SW1-Vlanif20]q

[SW1]int vlan 30
[SW1-Vlanif30]ip address 192.168.30.1 24
[SW1-Vlanif30]q

[SW1]int g0/0/2
[SW1-GigabitEthernet0/0/2]port link-type trunk
[SW1-GigabitEthernet0/0/2]port trunk allow-pass vlan 10 20
[SW1-GigabitEthernet0/0/2]q

[SW1]int g0/0/3
[SW1-GigabitEthernet0/0/3]port link-type access
[SW1-port-group-default]port default vlan 30
[SW1-port-group-default]q

[SW1]q
<SW1>save

<SW1>dis vlan

 

配置SW2：

<Huawei>sys

[Huawei]sys SW2

[SW2]vlan bat 10 20
[SW2]int g0/0/1
[SW2-GigabitEthernet0/0/1]port link-type trunk
[SW2-GigabitEthernet0/0/1]port trunk allow-pass vlan 10 20

[SW2-GigabitEthernet0/0/1]q

[SW2]int g0/0/2
[SW2-GigabitEthernet0/0/2]port link-type access
[SW2-GigabitEthernet0/0/2]port default vlan 10
[SW2-GigabitEthernet0/0/2]q

[SW2]int g0/0/3
[SW2-GigabitEthernet0/0/3]port link-type access
[SW2-GigabitEthernet0/0/3]port default vlan 20
[SW2-GigabitEthernet0/0/3]dis this

[SW2-GigabitEthernet0/0/3]q
[SW2]dis vlan

[SW2]q
<SW2>save

配置PC的IP地址，然后測試互通

 

SW3未作配置