华为三层交换机配置基于接口划分vlan

组网需求：汇聚层交换机做为 PC 电脑的网关，通过配置实现各PC 电脑之间的互访通信：

PC1设置IP为192.168.10.2，网关为 vlanif 10接口地址192.168.10.1/24;

PC2设置IP为192.168.20.2，网关为 vlanif 20 接口地址 192.168.20.1/24；

PC3设置IP为192.168.30.2，网关为 vlanif 30 接口地址 192.168.30.1/24；

 

配置SW1：

<Huawei>system-view
[Huawei]sysname SW1
[SW1]vlan batch 10 20 30

[SW1]int vlan 10
[SW1-Vlanif10]ip address 192.168.10.1 24
[SW1-Vlanif10]q

[SW1]int vlan 20
[SW1-Vlanif20]ip address 192.168.20.1 24
[SW1-Vlanif20]q

[SW1]int vlan 30
[SW1-Vlanif30]ip address 192.168.30.1 24
[SW1-Vlanif30]q

[SW1]int g0/0/2
[SW1-GigabitEthernet0/0/2]port link-type trunk
[SW1-GigabitEthernet0/0/2]port trunk allow-pass vlan 10 20
[SW1-GigabitEthernet0/0/2]q

[SW1]int g0/0/3
[SW1-GigabitEthernet0/0/3]port link-type access
[SW1-port-group-default]port default vlan 30
[SW1-port-group-default]q

[SW1]q
<SW1>save

<SW1>dis vlan

 

配置SW2：

<Huawei>sys

[Huawei]sys SW2

[SW2]vlan bat 10 20
[SW2]int g0/0/1
[SW2-GigabitEthernet0/0/1]port link-type trunk
[SW2-GigabitEthernet0/0/1]port trunk allow-pass vlan 10 20

[SW2-GigabitEthernet0/0/1]q

[SW2]int g0/0/2
[SW2-GigabitEthernet0/0/2]port link-type access
[SW2-GigabitEthernet0/0/2]port default vlan 10
[SW2-GigabitEthernet0/0/2]q

[SW2]int g0/0/3
[SW2-GigabitEthernet0/0/3]port link-type access
[SW2-GigabitEthernet0/0/3]port default vlan 20
[SW2-GigabitEthernet0/0/3]dis this

[SW2-GigabitEthernet0/0/3]q
[SW2]dis vlan

[SW2]q
<SW2>save

配置PC的IP地址，然后测试互通

 

SW3未作配置