1、靜態路由
靜態路由的路由項需要手動添加，而非動態路由，其是固定的，不會改變。
2、靜態路由配置實例
（1）實驗拓撲如下圖所示：
（2）配置命令
AR1配置命令：
<Huawei>system-view #進入系統界面
[Huawei]interface GigabitEthernet 0/0/0 # 進入G端口
[Huawei-GigabitEthernet0/0/0]ip addr 10.1.1.1 24 # 配置G端口的IP地址和子網掩碼
[Huawei-GigabitEthernet0/0/0]quit # 返回上一界面
[Huawei]interface GigabitEthernet 0/0/1
[Huawei-GigabitEthernet0/0/1]ip addr 1.1.1.1 24
[Huawei-GigabitEthernet0/0/1]quit
[Huawei]ip route-static 20.1.1.0 30 1.1.1.2 # 配置添加靜態路由信息 目標網絡，掩碼，下一跳
<Huawei>display ip interface brief # 查看接口與IP相關的配置和統計信息
*down: administratively down
^down: standby
(l): loopback
(s): spoofing
The number of interface that is UP in Physical is 3
The number of interface that is DOWN in Physical is 1
The number of interface that is UP in Protocol is 3
The number of interface that is DOWN in Protocol is 1
Interface IP Address/Mask Physical Protocol
GigabitEthernet0/0/0 10.1.1.1/24 up up
GigabitEthernet0/0/1 1.1.1.1/24 up up
GigabitEthernet0/0/2 unassigned down down
NULL0 unassigned up up(s)
AR2配置命令:
<Huawei>system-view
[Huawei]interface GigabitEthernet 0/0/0
[Huawei-GigabitEthernet0/0/0]ip addr 1.1.1.2 24
[Huawei-GigabitEthernet0/0/0]quit
[Huawei]interface GigabitEthernet 0/0/1
[Huawei-GigabitEthernet0/0/1]ip addr 20.1.1.1 30
[Huawei-GigabitEthernet0/0/1]quit
[Huawei]ip route-static 10.1.1.0 30 1.1.1.1