vcftools是一種可以對VCF文件和BCF文件進行格式轉換及過濾的工具，其中很多過濾及計算功能我們可以自己使用perl或者python編寫腳本實現，但都不如這個工具的運算速度快。目前官網的版本是vcftools v0.1.13。

中文版本：https://www.jianshu.com/p/badd24cbc538

基本參數

輸入參數

  • –vcf <input_filename> 支持v4.0、v4.1或者v4.2版本的VCF文件
  • –gzvcf <input_filename> 通過gzipped壓縮過的VCF文件
  • –bcf <input_filename>

輸出參數

  • –out <output_prefix> 輸出文件，后面直接對輸出文件命名
  • –stdout 可接管道符對輸出結果進行重新定向
  • –temp <temporary_directory> 指定結果的輸出目錄

過濾參數

根據位置過濾

  • –chr 指令可多次使用
  • –not-chr 指令可以多次使用
  • –from-bp
  • –to-bp 這兩個參數需要和–chr一起使用
  • –positions
  • –exclude-positions Include or exclude a set of sites on the basis of a list of positions in a file. Each line of the input file should contain a (tab-separated) chromosome and position. The file can have comment lines that start with a “#”, they will be ignored.自己理解下就好

根據位點過濾

  • –snp 字符串的名稱可以匹配dbSNP的數據，適合人類基因組，該指令可多次使用
  • –snps
  • -exclude Include or exclude a list of SNPs given in a file. The file should contain a list of SNP IDs (e.g. dbSNP rsIDs), with one ID per line. No header line is expected.自己理解下就好

變異類型過濾

  • –keep-only-indels 只保留indel標記
  • –remove-indels 刪除indel標記

根據flag過濾

  • –remove-filtered-all Removes all sites with a FILTER flag other than PASS.
  • –keep-filtered
  • –remove-filtered

ncludes or excludes all sites marked with a specific FILTER flag. These options may be used more than once to specify multiple FILTER flags.自己理解下就好

根據INFO過濾

  • –keep-INFO
  • –remove-INFO

Includes or excludes all sites with a specific INFO flag. These options only filter on the presence of the flag and not its value. These options can be used multiple times to specify multiple INFO flags.自己理解下就好

根據ALLELE過濾

  • –maf MAF最小值過濾
  • –max-maf MAF最大值過濾

此處省去很多參數，具體參見vcftools官網

根據基因型數值過濾

  • –min-meanDP
  • –max-meanDP 
    根據測序深度進行過濾
  • –hwe

Assesses sites for Hardy-Weinberg Equilibrium using an exact test, as defined by Wigginton, Cutler and Abecasis (2005). Sites with a p-value below the threshold defined by this option are taken to be out of HWE, and therefore excluded.

  • –max-missing 完整度，該參數介於0，1之間

根據材料過濾

  • –indv
  • –remove-indv

Specify an individual to be kept or removed from the analysis. This option can be used multiple times to specify multiple individuals. If both options are specified, then the “–indv” option is executed before the “–remove-indv option”.

  • –keep
  • –remove

Provide files containing a list of individuals to either include or exclude in subsequent analysis. Each individual ID (as defined in the VCF headerline) should be included on a separate line. If both options are used, then the “–keep” option is executed before the “–remove” option. When multiple files are provided, the union of individuals from all keep files subtracted by the union of individuals from all remove files are kept. No header line is expected.

  • –max-indv

Randomly thins individuals so that only the specified number are retained.

基因型過濾參數

  • –remove-filtered-geno-all 排除flag不為’.’和’PASS’的基因型
  • –remove-filtered-geno 排除flag為string的基因型
  • –minGQ 排除GQ低於這個參數的基因型
  • –minDP
  • –maxDP

Includes only genotypes greater than or equal to the “–minDP” value and less than or equal to the “–maxDP” value. This option requires that the “DP” FORMAT tag is specified for all sites.

計算統計

核算多樣性統計

  • –site-pi 計算所有SNP
  • –window-pi
  • –window-pi-step

Measures the nucleotide diversity in windows, with the number provided as the window size. The output file has the suffix “.windowed.pi”. The latter is an optional argument used to specify the step size in between windows.滑動窗口計算sliding windows，參考A reference genome for common bean and genome-wide analysis of dual domestications

FST計算

  • –weir-fst-pop

This option is used to calculate an Fst estimate from Weir and Cockerham’s 1984 paper. This is the preferred calculation of Fst. The provided file must contain a list of individuals (one individual per line) from the VCF file that correspond to one population. This option can be used multiple times to calculate Fst for more than two populations. These files will also be included as “–keep” options. By default, calculations are done on a per-site basis. The output file has the suffix “.weir.fst”.

  • –fst-window-size
  • –fst-window-step

These options can be used with “–weir-fst-pop” to do the Fst calculations on a windowed basis instead of a per-site basis. These arguments specify the desired window size and the desired step size between windows.滑動窗口計算,重測序可以設置10-kb/2-kb sliding windows，參考A reference genome for common bean and genome-wide analysis of dual domestications

其它計算

  • –het

Calculates a measure of heterozygosity on a per-individual basis. Specfically, the inbreeding coefficient, F, is estimated for each individual using a method of moments. The resulting file has the suffix “.het”.

  • –hardy

Reports a p-value for each site from a Hardy-Weinberg Equilibrium test (as defined by Wigginton, Cutler and Abecasis (2005)). The resulting file (with suffix “.hwe”) also contains the Observed numbers of Homozygotes and Heterozygotes and the corresponding Expected numbers under HWE.

  • –TajimaD

Outputs Tajima’s D statistic in bins with size of the specified number. The output file has the suffix “.Tajima.D”.

  • –indv-freq-burden

This option calculates the number of variants within each individual of a specific frequency. The resulting file has the suffix “.ifreqburden”.

  • –LROH

This option will identify and output Long Runs of Homozygosity. The output file has the suffix “.LROH”. This function is experimental, and will use a lot of memory if applied to large datasets.

  • –relatedness

This option is used to calculate and output a relatedness statistic based on the method of Yang et al, Nature Genetics 2010 (doi:10.1038/ng.608). Specifically, calculate the unadjusted Ajk statistic. Expectation of Ajk is zero for individuals within a populations, and one for an individual with themselves. The output file has the suffix “.relatedness”.

  • –relatedness2

This option is used to calculate and output a relatedness statistic based on the method of Manichaikul et al., BIOINFORMATICS 2010 (doi:10.1093/bioinformatics/btq559). The output file has the suffix “.relatedness2”.

  • –site-quality 主要用於提取VCF文件中每個位點的QUAL信息
1
2
3
4
5
6
7
8
9
 
vcftools --vcf test.vcf --site-quality  --out quality
``` 
 
- --missing-indv
 
- --missing-site 計算每個位點的缺失率 

``` bash
vcftools --vcf test.recode.vcf --missing-site --out ms
  • –SNPdensity 計算SNP在設定bin內的密度
1
 
vcftools --vcf test.vcf --SNPdensity 1000000 --out SNPden
  • –kept-sites

Creates a file listing all sites that have been kept after filtering. The file has the suffix “.kept.sites”.

  • –removed-sites

Creates a file listing all sites that have been removed after filtering. The file has the suffix “.removed.sites”.

  • –singletons

This option will generate a file detailing the location of singletons, and the individual they occur in. The file reports both true singletons, and private doubletons (i.e. SNPs where the minor allele only occurs in a single individual and that individual is homozygotic for that allele). The output file has the suffix “.singletons”.

  • –hist-indel-len

This option will generate a histogram file of the length of all indels (including SNPs). It shows both the count and the percentage of all indels for indel lengths that occur at least once in the input file. SNPs are considered indels with length zero. The output file has the suffix “.indel.hist”.

  • –hapcount

This option will output the number of unique haplotypes within user specified bins, as defined by the BED file. The output file has the suffix “.hapcount”.

  • –mendel

This option is use to report mendel errors identified in trios. The command requires a PLINK-style PED file, with the first four columns specifying a family ID, the child ID, the father ID, and the mother ID. The output of this command has the suffix “.mendel”.

  • –extract-FORMAT-info

Extract information from the genotype fields in the VCF file relating to a specfied FORMAT identifier. The resulting output file has the suffix “.<FORMAT_ID>.FORMAT”. For example, the following command would extract the all of the GT (i.e. Genotype) entries:

vcftools –vcf file1.vcf –extract-FORMAT-info GT

  • –get-INFO

This option is used to extract information from the INFO field in the VCF file. The argument specifies the INFO tag to be extracted, and the option can be used multiple times in order to extract multiple INFO entries. The resulting file, with suffix “.INFO”, contains the required INFO information in a tab-separated table. For example, to extract the NS and DB flags, one would use the command:

vcftools –vcf file1.vcf –get-INFO NS –get-INFO DB

輸出格式

  • –recode
  • –recode-bcf

These options are used to generate a new file in either VCF or BCF from the input VCF or BCF file after applying the filtering options specified by the user. The output file has the suffix “.recode.vcf” or “.recode.bcf”. By default, the INFO fields are removed from the output file, as the INFO values may be invalidated by the recoding (e.g. the total depth may need to be recalculated if individuals are removed). This behavior may be overriden by the following options. By default, BCF files are written out as BGZF compressed files.

  • –recode-INFO
  • –recode-INFO-all

These options can be used with the above recode options to define an INFO key name to keep in the output file. This option can be used multiple times to keep more of the INFO fields. The second option is used to keep all INFO values in the original file.

  • –contigs

This option can be used in conjuction with the –recode-bcf when the input file does not have any contig declarations. This option expects a file name with one contig header per line. These lines are included in the output file.

格式轉換

  • –012

This option outputs the genotypes as a large matrix. Three files are produced. The first, with suffix “.012”, contains the genotypes of each individual on a separate line. Genotypes are represented as 0, 1 and 2, where the number represent that number of non-reference alleles. Missing genotypes are represented by -1. The second file, with suffix “.012.indv” details the individuals included in the main file. The third file, with suffix “.012.pos” details the site locations included in the main file.

  • –IMPUTE

This option outputs phased haplotypes in IMPUTE reference-panel format. As IMPUTE requires phased data, using this option also implies –phased. Unphased individuals and genotypes are therefore excluded. Only bi-allelic sites are included in the output. Using this option generates three files. The IMPUTE haplotype file has the suffix “.impute.hap”, and the IMPUTE legend file has the suffix “.impute.hap.legend”. The third file, with suffix “.impute.hap.indv”, details the individuals included in the haplotype file, although this file is not needed by IMPUTE.

  • –ldhat
  • –ldhat-geno

These options output data in LDhat format. This option requires the “–chr” filter option to also be used. The first option outputs phased data only, and therefore also implies “–phased” be used, leading to unphased individuals and genotypes being excluded. The second option treats all of the data as unphased, and therefore outputs LDhat files in genotype/unphased format. Two output files are generated with the suffixes “.ldhat.sites” and “.ldhat.locs”, which correspond to the LDhat “sites” and “locs” input files respectively.

  • –BEAGLE-GL
  • –BEAGLE-PL

These options output genotype likelihood information for input into the BEAGLE program. The VCF file is required to contain FORMAT fields with “GL” or “PL” tags, which can generally be output by SNP callers such as the GATK. Use of this option requires a chromosome to be specified via the “–chr” option. The resulting output file has the suffix “.BEAGLE.GL” or “.BEAGLE.PL” and contains genotype likelihoods for biallelic sites. This file is suitable for input into BEAGLE via the “like=” argument.

  • –plink
  • –plink-tped
  • –chrom-map

These options output the genotype data in PLINK PED format. With the first option, two files are generated, with suffixes “.ped” and “.map”. Note that only bi-allelic loci will be output. Further details of these files can be found in the PLINK documentation.
Note: The first option can be very slow on large datasets. Using the –chr option to divide up the dataset is advised, or alternatively use the –plink-tped option which outputs the files in the PLINK transposed format with suffixes “.tped” and “.tfam”.
For usage with variant sites in species other than humans, the –chrom-map option may be used to specify a file name that has a tab-delimited mapping of chromosome name to a desired integer value with one line per chromosome. This file must contain a mapping for every chromosome value found in the file.

比較選線

  • DIFF VCF FILE

  • –diff

  • –gzdiff
  • –diff-bcf

These options compare the original input file to this specified VCF, gzipped VCF, or BCF file. These options must be specified with one additional option described below in order to specify what type of comparison is to be performed. See the examples section for typical usage.

  • –diff-site

Outputs the sites that are common / unique to each file. The output file has the suffix “.diff.sites_in_files”.

  • –diff-indv

Outputs the individuals that are common / unique to each file. The output file has the suffix “.diff.indv_in_files”.

  • –diff-site-discordance

This option calculates discordance on a site by site basis. The resulting output file has the suffix “.diff.sites”.

  • –diff-indv-discordance

This option calculates discordance on a per-individual basis. The resulting output file has the suffix “.diff.indv”.

  • –diff-indv-map

This option allows the user to specify a mapping of individual IDs in the second file to those in the first file. The program expects the file to contain a tab-delimited line containing an individual’s name in file one followed by that same individual’s name in file two with one mapping per line.

  • –diff-discordance-matrix

This option calculates a discordance matrix. This option only works with bi-allelic loci with matching alleles that are present in both files. The resulting output file has the suffix “.diff.discordance.matrix”.

  • –diff-switch-error

This option calculates phasing errors (specifically “switch errors”). This option creates an output file describing switch errors found between sites, with suffix “.diff.switch”.

 

文件格式：https://www.cnblogs.com/chenwenyan/p/8572537.html，http://blog.sciencenet.cn/blog-1094241-1104923.html