轉至：www.centos.bz/2014/12/ha-load-balance-mysql-master-slave-architecture/
架構簡介
前幾天網友來信說幫忙實現這樣一個架構：只有兩台機器，需要實現其中一台死機之后另一台能接管這台機器的服務，並且在兩台機器正常服務時，兩台機器都能用上。於是設計了如下的架構。
此架構主要是由keepalived實現雙機高可用，維護了一個外網VIP,一個內網VIP。正常情況時，外網VIP和內網VIP都綁定在server1服務器，web請求發送到server1的nginx，nginx對於靜態資源請求就直接在本機檢索並返回，對於php的動態請求，則負載均衡到server1和server2。對於SQL請求，會將此類請求發送到Atlas MySQL中間件，Atlas接收到請求之后，把涉及寫操作的請求發送到內網VIP，讀請求操作發送到mysql從，這樣就實現了讀寫分離。
當主服務器server1宕機時，keepalived檢測到后，立即把外網VIP和內網VIP綁定到server2，並把server2的mysql切換成主庫。此時由於外網VIP已經轉移到了server2，web請求將發送給server2的nginx。nginx檢測到server1宕機，不再把請求轉發到server1的php-fpm。之后的sql請求照常發送給本地的atlas，atlas把寫操作發送給內網VIP，讀操作發送給mysql從，由於內網VIP已經綁定到server2了，server2的mysql同時接受寫操作和讀操作。
當主服務器server1恢復后，server1的mysql自動設置為從，與server2的mysql主同步。keepalived不搶占server2的VIP，繼續正常服務。
架構要求
要實現此架構，需要三個條件：
-
1、服務器可以設置內網IP，並且設置的內網IP互通;
-
2、服務器可以隨意綁定IDC分配給我們使用的外網IP，即外網IP沒有綁定MAC地址;
-
3、MySQL服務器支持GTID，即MySQL-5.6.5以上版本。
環境說明
server1
-
eth0: 10.96.153.110(對外IP)
-
eth1: 192.168.1.100(對內IP)
server2
-
eth0: 10.96.153.114(對外IP)
-
eth1: 192.168.1.101(對內IP)
系統都是CentOS-6。
對外VIP: 10.96.153.239
對內VIP: 192.168.1.150hosts設置
/etc/hosts:
192.168.1.100 server1
192.168.1.101 server2Nginx PHP MySQL Memcached安裝
這幾個軟件的安裝推薦使用EZHTTP來完成。
解決session共享問題
php默認的session存儲是在/tmp目錄下，現在我們是用兩台服務器作php請求的負載，這樣會造成session分布在兩台服務器的/tmp目錄下，導致依賴於session的功能不正常。我們可以使用memcached來解決此問題。
上一步我們已經安裝好了memcached，現在只需要配置php.ini來使用memcached，配置如下，打開php.ini配置文件，修改為如下兩行的值：session.save_handler = memcache
session.save_path = "tcp://192.168.1.100:11211,tcp://192.168.1.101:11211"
之后重啟php-fpm生效。
Nginx配置
Server1配置
http {
[...]
upstream php-server {
server 192.168.1.101:9000;
server 127.0.0.1:9000;
keepalive 100;
}
[...]
server {
[...]
location ~ \.php$ {
fastcgi_pass php-server;
fastcgi_index index.php;
fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
include fastcgi_params;
}
[...]
}
[...]
}
Server2配置
http {
[...]
upstream php-server {
server 192.168.1.100:9000;
server 127.0.0.1:9000;
keepalive 100;
}
[...]
server {
[...]
location ~ \.php$ {
fastcgi_pass php-server;
fastcgi_index index.php;
fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
include fastcgi_params;
}
[...]
}
[...]
}
這兩個配置主要的作用是設置php請求的負載均衡。
MySQL配置
mysql util安裝
我們需要安裝mysql util里的主從配置工具來實現主從切換。
cd /tmp
wget http://dev.mysql.com/get/Downloads/MySQLGUITools/mysql-utilities-1.5.3.tar.gz
tar xzf mysql-utilities-1.5.3.tar.gz
cd mysql-utilities-1.5.3
python setup.py build
python setup.py install
mysql my.cnf配置
server1:
[mysql]
[...]
protocol=tcp
[...]
[...]
[mysqld]
[...]
# BINARY LOGGING #
log-bin = /usr/local/mysql/data/mysql-bin
expire-logs-days = 14
binlog-format= row
log-slave-updates=true
gtid-mode=on
enforce-gtid-consistency =true
master-info-repository=TABLE
relay-log-info-repository=TABLE
server-id=1
report-host=server1
report-port=3306
[...]
server2:
[mysql]
[...]
protocol=tcp
[...]
[mysqld]
[...]
# BINARY LOGGING #
log-bin = /usr/local/mysql/data/mysql-bin
expire-logs-days = 14
binlog-format= row
log-slave-updates=true
gtid-mode=on
enforce-gtid-consistency =true
master-info-repository=TABLE
relay-log-info-repository=TABLE
server-id=2
report-host=server2
report-port=3306
[...]
這兩個配置主要是設置了binlog和啟用gtid-mode，並且需要設置不同的server-id和report-host。
開放root帳號遠程權限
我們需要在兩台mysql服務器設置root帳號遠程訪問權限。
mysql> grant all on *.* to 'root'@'192.168.1.%' identified by 'Xp29at5F37' with grant option;
mysql> grant all on *.* to 'root'@'server1' identified by 'Xp29at5F37' with grant option;
mysql> grant all on *.* to 'root'@'server2' identified by 'Xp29at5F37' with grant option;
mysql> flush privileges;
設置mysql主從
在任意一台執行如下命令：
mysqlreplicate --master=root:Xp29at5F37@server1:3306 --slave=root:Xp29at5F37@server2:3306 --rpl-user=rpl:o67DhtaW
# master on server1: … connected.
# slave on server2: … connected.
# Checking for binary logging on master…
# Setting up replication…
# …done.
顯示主從關系
mysqlrplshow --master=root:Xp29at5F37@server1 --discover-slaves-login=root:Xp29at5F37
# master on server1: … connected.
# Finding slaves for master: server1:3306
# Replication Topology Graph
server1:3306 (MASTER)
|
+— server2:3306 – (SLAVE)
檢查主從狀態
mysqlrplcheck --master=root:Xp29at5F37@server1 --slave=root:Xp29at5F37@server2
# master on server1: … connected.
# slave on server2: … connected.
Test Description Status
—————————————————————————
Checking for binary logging on master [pass]
Are there binlog exceptions? [pass]
Replication user exists? [pass]
Checking server_id values [pass]
Checking server_uuid values [pass]
Is slave connected to master? [pass]
Check master information file [pass]
Checking InnoDB compatibility [pass]
Checking storage engines compatibility [pass]
Checking lower_case_table_names settings [pass]
Checking slave delay (seconds behind master) [pass]
# …done.
Keepalived配置
keepalived安裝(兩台都裝)
-
yum -y install keepalived
-
chkconfig keepalived on
keepalived配置(server1)
vi /etc/keepalived/keepalived.conf
vrrp_sync_group VG_1 {
group {
inside_network
outside_network
}
}
vrrp_instance inside_network {
state BACKUP
interface eth1
virtual_router_id 51
priority 101
advert_int 1
authentication {
auth_type PASS
auth_pass 3489
}
virtual_ipaddress {
192.168.1.150/24
}
nopreempt
notify /data/sh/mysqlfailover-server1.sh
}
vrrp_instance outside_network {
state BACKUP
interface eth0
virtual_router_id 50
priority 101
advert_int 1
authentication {
auth_type PASS
auth_pass 3489
}
virtual_ipaddress {
10.96.153.239/24
}
nopreempt
}
keepalived配置(server2)
rrp_sync_group VG_1 {
group {
inside_network
outside_network
}
}
vrrp_instance inside_network {
state BACKUP
interface eth1
virtual_router_id 51
priority 100
advert_int 1
authentication {
auth_type PASS
auth_pass 3489
}
virtual_ipaddress {
192.168.1.150
}
notify /data/sh/mysqlfailover-server2.sh
}
vrrp_instance outside_network {
state BACKUP
interface eth0
virtual_router_id 50
priority 100
advert_int 1
authentication {
auth_type PASS
auth_pass 3489
}
virtual_ipaddress {
10.96.153.239/24
}
}
此keepalived配置需要注意的是：
-
1、兩台server的state都設置為backup，server1增加nopreempt配置，並且server1 priority比server2高，這樣用來實現當server1從宕機恢復時，不搶占VIP;
-
2、server1設置notify /data/sh/mysqlfailover-server1.sh,server2設置notify /data/sh/mysqlfailover-server2.sh,作用是自動切換主從
/data/sh/mysqlfailover-server1.sh腳本內容：
#!/bin/bash
sleep 10
state=$3
result=`mysql -h127.0.0.1 -P3306 -uroot -pXp29at5F37 -e 'show slave status;'`
[[ "$result" == "" ]] && mysqlState="master" || mysqlState="slave"
if [[ "$state" == "MASTER" ]];then
if [[ "$mysqlState" == "slave" ]];then
mysqlrpladmin --slave=root:Xp29at5F37@server1:3306 failover
fi
elif [[ "$state" == "BACKUP" ]];then
if [[ "$mysqlState" == "master" ]];then
mysqlreplicate --master=root:Xp29at5F37@server2:3306 --slave=root:Xp29at5F37@server1:3306 --rpl-user=rpl:o67DhtaW
fi
fi
sed -i 's/proxy-read-only-backend-addresses.*/proxy-read-only-backend-addresses = 192.168.1.150:3306/' /usr/local/mysql-proxy/conf/my.cnf
mysql -h127.0.0.1 -P2345 -uuser -ppwd -e "REMOVE BACKEND 2;"
/data/sh/mysqlfailover-server2.sh腳本內容：
#!/bin/bash
sleep 10
state=$3
result=`mysql -h127.0.0.1 -P3306 -uroot -pXp29at5F37 -e 'show slave status;'`
[[ "$result" == "" ]] && mysqlState="master" || mysqlState="slave"
if [[ "$state" == "MASTER" ]];then
if [[ "$mysqlState" == "slave" ]];then
mysqlrpladmin --slave=root:Xp29at5F37@server2:3306 failover
fi
elif [[ "$state" == "BACKUP" ]];then
if [[ "$mysqlState" == "master" ]];then
mysqlreplicate --master=root:Xp29at5F37@server1:3306 --slave=root:Xp29at5F37@server2:3306 --rpl-user=rpl:o67DhtaW
fi
fi
sed -i 's/proxy-read-only-backend-addresses.*/proxy-read-only-backend-addresses = 192.168.1.150:3306/' /usr/local/mysql-proxy/conf/my.cnf
mysql -h127.0.0.1 -P2345 -uuser -ppwd -e "REMOVE BACKEND 2;"
Atlas設置
atlas安裝
到這里下載最新版本，https://github.com/Qihoo360/Atlas/releases
cd /tmp
wget https://github.com/Qihoo360/Atlas/releases/download/2.2.1/Atlas-2.2.1.el6.x86_64.rpm
rpm -i Atlas-2.2.1.el6.x86_64.rpm
atlas配置
cd /usr/local/mysql-proxy/conf
cp test.cnf my.cnf
vi my.cnf
調整如下參數，
proxy-backend-addresses = 192.168.1.150:3306
proxy-read-only-backend-addresses = 192.168.1.101:3306
pwds = root:qtyU1btXOo074Itvx0UR9Q==
event-threads = 8
注意：
proxy-backend-addresse設置為內網VIP
proxy-read-only-backend-addresses設置為server2的IP
root:qtyU1btXOo074Itvx0UR9Q==設置數據庫的用戶和密碼，密碼是通過/usr/local/mysql-proxy/bin/encrypt Xp29at5F37生成。
更詳細參數解釋請查看，Atlas配置詳解。
啟動atlas
/usr/local/mysql-proxy/bin/mysql-proxy –defaults-file=/usr/local/mysql-proxy/conf/my.cnf
之后程序里配置mysql就配置127.0.0.1:1234就好。
部署atlas自動維護腳本
在兩台機器都部署此腳本，並添加定時任務（如每2分鍾運行一次）我們把腳本放在/data/sh/auto_maintain_atlas.sh,腳本內容為：
#!/bin/bash
count=`mysql -N -h127.0.0.1 -P2345 -uuser -ppwd -e "select * from backends;" | wc -l`
if [[ "$count" == "1" ]];then
result=`mysql -hserver1 -P3306 -uroot -pXp29at5F37 -e 'show slave status\G'`
if echo "$result" | grep Slave_IO_State;then
slaveIP=192.168.1.100
else
result=`mysql -hserver2 -P3306 -uroot -pXp29at5F37 -e 'show slave status\G'`
slaveIP=192.168.1.101
fi
slaveIORunning=`echo "$result" | awk -F':' '/Slave_IO_Running:/{print $2}'`
slaveSQLRunning=`echo "$result" | awk -F':' '/Slave_SQL_Running:/{print $2}'`
SlaveSQLRunning_State=`echo "$result" | awk -F':' '/Slave_SQL_Running_State:/{print $2}'`
if [[ "$slaveIORunning" =~ "Yes" && "$slaveSQLRunning" =~ "Yes" && "$SlaveSQLRunning_State" =~ "Slave has read all relay log" ]];then
mysql -h127.0.0.1 -P2345 -uuser -ppwd -e "add slave ${slaveIP}:3306;"
fi
fi
為什么需要這個腳本呢？假設目前mysql主服務器在s1,s1宕機后，s2接管VIP，接着刪除atlas中設置的slave backend，其mysql提升為主。過一段時間后，s1從宕機中恢復，這時候s1的mysql自動切換為從，接着刪除atlas中設置的slave backend，開始連接s2的mysql主同步數據。到這個時候我們發現，已經不存在讀寫分離了，所有的sql都發送給了s2的mysql。auto_maintain_atlas.sh腳本就派上用場了，此腳本會定時的檢查主從是否已經同步完成，如果完成就自動增加slave backend，這樣讀寫分離又恢復了，完全不需要人工干預。
server1主宕機測試
測試keepalived是否工作正常
我們來模擬server1宕機。
在server1上執行shutdown關機命令。
此時我們登錄server2，執行ip addr命令，輸出如下：
1: lo: mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:81:9d:42 brd ff:ff:ff:ff:ff:ff
inet 10.96.153.114/24 brd 10.96.153.255 scope global eth0
inet 10.96.153.239/24 scope global secondary eth0
inet6 fe80::20c:29ff:fe81:9d42/64 scope link
valid_lft forever preferred_lft forever
3: eth1: mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:81:9d:4c brd ff:ff:ff:ff:ff:ff
inet 192.168.1.101/24 brd 192.168.1.255 scope global eth1
inet 192.168.1.150/32 scope global eth1
inet6 fe80::20c:29ff:fe81:9d4c/64 scope link
valid_lft forever preferred_lft forever
我們看到對外VIP 10.96.153.239和對內IP 192.168.1.150已經轉移到server2了，證明keepalived運行正常。
測試是否自動切換了主從
登錄server2的mysql服務器，執行show slave status;命令，如下：
mysql> show slave statusG
Empty set (0.00 sec)
我們發現從狀態已經為空，證明已經切換為主了。
測試server1是否搶占VIP
為什么要測試這個呢？如果server1恢復之后搶占了VIP，而我們的Atlas里后端設置的是VIP，這樣server1啟動之后，sql的寫操作就會向server1的mysql發送，而server1的mysql數據是舊於server2的，所以這樣會造成數據不一致，這個是非常重要的測試。
我們先來啟動server1，之后執行ip addr，輸出如下：
1: lo: mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:f1:4f:4e brd ff:ff:ff:ff:ff:ff
inet 10.96.153.110/24 brd 10.96.153.255 scope global eth0
inet6 fe80::20c:29ff:fef1:4f4e/64 scope link
valid_lft forever preferred_lft forever
3: eth1: mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:f1:4f:58 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.100/24 brd 192.168.1.255 scope global eth1
inet6 fe80::20c:29ff:fef1:4f58/64 scope link
valid_lft forever preferred_lft forever
我們看到，server1並沒有搶占VIP，測試正常。不過另人郁悶的是，在虛擬機的環境並沒有測試成功，不知道為什么。
測試server2的atlas是否已經刪除slave backend
我們測試這個是為了保證atlas已經沒有slave backend，也就是沒有從庫的設置了，否則當server1恢復時，有可能會把讀請求發送給server1的mysql，造成讀取了舊數據的問題。
[root@server1 ~]# mysql -h127.0.0.1 -P2345 -uuser -ppwd
mysql> select * from backends;
+————-+——————–+——-+——+
| backend_ndx | address | state | type |
+————-+——————–+——-+——+
| 1 | 192.168.1.150:3306 | up | rw |
+————-+——————–+——-+——+
1 rows in set (0.00 sec)
如果看到只有一個后端，證明運作正常。
測試server1 mysql是否設置為從
serve1恢復后，登錄server1的mysql服務器，執行show slave status;命令，如下：
mysql> show slave statusG
*************************** 1. row ***************************
Slave_IO_State: Opening tables
Master_Host: server1
Master_User: rpl
Master_Port: 3306
Connect_Retry: 60
Master_Log_File: mysql-bin.000015
Read_Master_Log_Pos: 48405991
Relay_Log_File: mysql-relay-bin.000002
Relay_Log_Pos: 361
Relay_Master_Log_File: mysql-bin.000015
Slave_IO_Running: Yes
Slave_SQL_Running: yes
測試是否自動恢復讀寫分離
server1恢復后一段時間，我們可以看是讀寫分離是否已經恢復。
[root@server1 ~]# mysql -h127.0.0.1 -P2345 -uuser -ppwd
Warning: Using a password on the command line interface can be insecure.
Welcome to the MySQL monitor. Commands end with ; or g.
Your MySQL connection id is 1
Server version: 5.0.99-agent-admin
Copyright (c) 2000, 2014, Oracle and/or its affiliates. All rights reserved.
Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.
Type 'help;' or 'h' for help. Type 'c' to clear the current input statement.
mysql> select * from backends;
+————-+——————–+——-+——+
| backend_ndx | address | state | type |
+————-+——————–+——-+——+
| 1 | 192.168.1.150:3306 | up | rw |
| 2 | 192.168.1.100:3306 | up | ro |
+————-+——————–+——-+——+
2 rows in set (0.00 sec)
我們看到server1已經被添加為slave backend了。這表示已經成功恢復讀寫分離。