C# 獲取圖片的大小和分辨率

C# 獲取圖片的大小和分辨率 [轉貼 2011-4-20 13:39:19]     

  字號：大 中 小

文章來源: CSDN博客

//C#快速獲取JPG圖片大小及英寸分辨率
        public static int getJpgSize(string FileName, out Size JpgSize, out float Wpx, out float Hpx)
        {//C#快速獲取JPG圖片大小及英寸分辨率
            JpgSize = new Size(0, 0);
            Wpx = 0; Hpx = 0;
            int rx = 0;
            if (!File.Exists(FileName)) return rx;
            FileStream F_Stream = File.OpenRead(FileName);
            int ff = F_Stream.ReadByte();
            int type = F_Stream.ReadByte();
            if (ff != 0xff || type != 0xd8)
            {//非JPG文件
                F_Stream.Close();
                return rx;
            }
            long ps = 0;
            do
            {
                do
                {
                    ff = F_Stream.ReadByte();
                    if (ff < 0) //文件結束
                    {
                        F_Stream.Close();
                        return rx;
                    }
                } while (ff != 0xff);

                do
                {
                    type = F_Stream.ReadByte();
                } while (type == 0xff);

                //MessageBox.Show(ff.ToString() + "," + type.ToString(), F_Stream.Position.ToString());
                ps = F_Stream.Position;
                switch (type)
                {
                    case 0x00:
                    case 0x01:
                    case 0xD0:
                    case 0xD1:
                    case 0xD2:
                    case 0xD3:
                    case 0xD4:
                    case 0xD5:
                    case 0xD6:
                    case 0xD7:
                        break;
                    case 0xc0: //SOF0段
                        ps = F_Stream.ReadByte() * 256;
                        ps = F_Stream.Position + ps + F_Stream.ReadByte() - 2; //加段長度

                        F_Stream.ReadByte(); //丟棄精度數據
                        //高度
                        JpgSize.Height = F_Stream.ReadByte() * 256;
                        JpgSize.Height = JpgSize.Height + F_Stream.ReadByte();
                        //寬度
                        JpgSize.Width = F_Stream.ReadByte() * 256;
                        JpgSize.Width = JpgSize.Width + F_Stream.ReadByte();
                        //后面信息忽略
                        if (rx!=1 && rx < 3) rx = rx + 1;
                        break;
                    case 0xe0: //APP0段
                        ps = F_Stream.ReadByte() * 256;
                        ps = F_Stream.Position + ps + F_Stream.ReadByte() - 2; //加段長度

                        F_Stream.Seek(5,SeekOrigin.Current); //丟棄APP0標記(5bytes)
                        F_Stream.Seek(2,SeekOrigin.Current); //丟棄主版本號(1bytes)及次版本號(1bytes)
                        int units=F_Stream.ReadByte(); //X和Y的密度單位,units=0：無單位,units=1：點數/英寸,units=2：點數/厘米

                        //水平方向(像素/英寸)分辨率
                        Wpx=F_Stream.ReadByte()*256;
                        Wpx=Wpx+F_Stream.ReadByte();
                        if (units == 2) Wpx = (float)(Wpx * 2.54); //厘米變為英寸
                        //垂直方向(像素/英寸)分辨率
                        Hpx = F_Stream.ReadByte() * 256;
                        Hpx = Hpx + F_Stream.ReadByte();
                        if (units == 2) Hpx = (float)(Hpx * 2.54); //厘米變為英寸
                        //后面信息忽略
                        if (rx!=2 && rx<3) rx = rx + 2;
                        break;

                    default: //別的段都跳過////////////////
                        ps = F_Stream.ReadByte() * 256;
                        ps = F_Stream.Position + ps + F_Stream.ReadByte() - 2; //加段長度
                        break;
                }
                if (ps + 1 >= F_Stream.Length) //文件結束
                {
                    F_Stream.Close();
                    return rx;
                }
                F_Stream.Position = ps; //移動指針
            } while (type != 0xda); // 掃描行開始
            F_Stream.Close();
            return rx;
        }

 

我最近在玩和訊微博，很方便，很實用，你也來和我一起玩吧！
去看看我的微博吧！http://t.hexun.com/4194019/default.html