The following VDs are missing: 000
If you proceed (or load the configuration utility), these VDs will be removed from your configuration.
If you wish to use them at a later time, they will have to be imported. If you believe these VDs should be present, power off your system and check your cables to make sure all disks are present.
Press any key to continue, or press C to load the configuration utility.
原因：控制器無法找到已配置的硬盤。
處理方法：
- 檢查已配置的硬盤是否在位、連接是否正常。
- 進入BIOS，查看這些設備是否有顯示。
- 確保硬盤已啟動並有電源供應。
- 如果有背板，檢查連接器，確保硬盤有電源供應。