Openstack 一鍵安裝部署 單節點

使用 packstack 工具實現一鍵部署 OpenStack。 通過該安裝工具， 只需簡單運行一條命令， 即可以快速部署 OpenStack， 省去繁瑣的安裝步驟， 而直接體驗OpenStack 的管理及使用。 本案例需要提前部署一台新安裝的操作系統主機， 要求能訪問互聯網， 主機的系統采用最小化方式安裝即可。

內存要不低於8G，最好11G。本次實驗虛擬機是11G內存
CPU核心數不得低於4核。本次實驗虛擬機CPU核心4核

一，關閉防火牆並且安裝RDO軟件

[root@localhost ~]# systemctl stop firewalld
[root@localhost ~]# setenforce 0
[root@localhost ~]# yum -y install http://rdo.fedorapeople.org/rdo-release.rpm

二，安裝一個叫packstack的部署包

[root@localhost ~]# yum -y install openstack-packstack

三，一鍵自動安裝
注：這一步需要耐心等待很長一段時間

[root@localhost ~]# packstack --allinone
Welcome to the Packstack setup utility

The installation log file is available at: /var/tmp/packstack/20200629-210710-tKBTte/openstack-setup.log
Packstack changed given value  to required value /root/.ssh/id_rsa.pub

Installing:
Clean Up                                             [ DONE ]
Discovering ip protocol version                      [ DONE ]
Setting up ssh keys                                  [ DONE ]
Preparing servers                                    [ DONE ]
Pre installing Puppet and discovering hosts' details [ DONE ]
Preparing pre-install entries                        [ DONE ]
Setting up CACERT                                    [ DONE ]
Preparing AMQP entries                               [ DONE ]
Preparing MariaDB entries                            [ DONE ]
Fixing Keystone LDAP config parameters to be undef if empty[ DONE ]
Preparing Keystone entries                           [ DONE ]
Preparing Glance entries                             [ DONE ]
Checking if the Cinder server has a cinder-volumes vg[ DONE ]
Preparing Cinder entries                             [ DONE ]
Preparing Nova API entries                           [ DONE ]
Creating ssh keys for Nova migration                 [ DONE ]
Gathering ssh host keys for Nova migration           [ DONE ]
Preparing Nova Compute entries                       [ DONE ]
Preparing Nova Scheduler entries                     [ DONE ]
Preparing Nova VNC Proxy entries                     [ DONE ]
Preparing OpenStack Network-related Nova entries     [ DONE ]
Preparing Nova Common entries                        [ DONE ]
Preparing Neutron API entries                        [ DONE ]
Preparing Neutron L3 entries                         [ DONE ]
Preparing Neutron L2 Agent entries                   [ DONE ]
Preparing Neutron DHCP Agent entries                 [ DONE ]
Preparing Neutron Metering Agent entries             [ DONE ]
Checking if NetworkManager is enabled and running    [ DONE ]
Preparing OpenStack Client entries                   [ DONE ]
Preparing Horizon entries                            [ DONE ]
Preparing Swift builder entries                      [ DONE ]
Preparing Swift proxy entries                        [ DONE ]
Preparing Swift storage entries                      [ DONE ]
Preparing Gnocchi entries                            [ DONE ]
Preparing Redis entries                              [ DONE ]
Preparing Ceilometer entries                         [ DONE ]
Preparing Aodh entries                               [ DONE ]
Preparing Puppet manifests                           [ DONE ]
Copying Puppet modules and manifests                 [ DONE ]
Applying 192.168.116.128_controller.pp
Testing if puppet apply is finished: 192.168.116.128_controller.pp  [ - ]

看到** Installation completed successfully ***這句話就說明安裝成功了

**** Installation completed successfully ******

Additional information:
 * Parameter CONFIG_NEUTRON_L2_AGENT: You have chosen OVN Neutron backend. Note that this backend does not support the VPNaaS or FWaaS services. Geneve will be used as the encapsulation method for tenant networks
 * A new answerfile was created in: /root/packstack-answers-20200629-210711.txt
 * Time synchronization installation was skipped. Please note that unsynchronized time on server instances might be problem for some OpenStack components.
 * Warning: NetworkManager is active on 192.168.116.128. OpenStack networking currently does not work on systems that have the Network Manager service enabled.
 * File /root/keystonerc_admin has been created on OpenStack client host 192.168.116.128. To use the command line tools you need to source the file.
 * To access the OpenStack Dashboard browse to http://192.168.116.128/dashboard .
Please, find your login credentials stored in the keystonerc_admin in your home directory.
 * The installation log file is available at: /var/tmp/packstack/20200629-210710-tKBTte/openstack-setup.log
 * The generated manifests are available at: /var/tmp/packstack/20200629-210710-tKBTte/manifests

四，查看賬戶和密碼

[root@localhost ~]# cat keystonerc_admin 
unset OS_SERVICE_TOKEN
    export OS_USERNAME=admin
    export OS_PASSWORD='c8327e23a69d4c0f'
    export OS_REGION_NAME=RegionOne
    export OS_AUTH_URL=http://192.168.116.128:5000/v3
    export PS1='[\u@\h \W(keystone_admin)]\$ '
    
export OS_PROJECT_NAME=admin
export OS_USER_DOMAIN_NAME=Default
export OS_PROJECT_DOMAIN_NAME=Default
export OS_IDENTITY_API_VERSION=3

安裝完畢，可以通過OpenStack的網絡管理接口Horizon進行訪問，地址如：http://本機id/dashboard ，用戶名為admin，密碼可以在/root/keystonerc_admin文件中找到。