1.首先看app中怎么划分橫縱坐標
2.swipe函數
def swipe(self, start_x, start_y, end_x, end_y, duration=None):
"""Swipe from one point to another point, for an optional duration.
Args:
start_x (int): x-coordinate at which to start
start_y (int): y-coordinate at which to start
end_x (int): x-coordinate at which to stop
end_y (int): y-coordinate at which to stop
duration (:obj:`int`, optional): time to take the swipe, in ms.
Usage:
driver.swipe(100, 100, 100, 400)
Returns:
`appium.webdriver.webelement.WebElement`
"""
# `swipe` is something like press-wait-move_to-release, which the server
# will translate into the correct action
action = TouchAction(self)
action \
.press(x=start_x, y=start_y) \
.wait(ms=duration) \
.move_to(x=end_x, y=end_y) \
.release()
action.perform()
return self
解析：
swipe(self, start_x, start_y, end_x, end_y, duration=None)
swipe(開始橫坐標,開始縱坐標,結束橫坐標,結束縱坐標,持續的時間，單位毫秒)
重點：在執行swipe之前一定要強制sleep 3-4s，不然會出現：wipe did not complete successfully報錯
3.各種滑動
3.1 因為每個手機的坐標可能都不一樣，這里我們可以通過先獲取手機屏幕的長和寬，然后再次計算需要滑動的坐標位置，
def get_myWindow_size(self):
'''
獲取手機長寬
:return:
'''
x = self.driver.get_window_size()['width'] # 獲取x軸的長度
y = self.driver.get_window_size()['height'] # 獲取y軸的長度
return x,y
3.2 向下滑動，即x軸不變，y軸減小
def swipeDown(self):
'''
頁面向下滑動
:return:
'''
size = self.get_myWindow_size()
MyLog.logger().info("size :" +str(size[0])+','+str(size[1]))
x1 = int(size[0] * 0.5) # size[0]取元組的第一個值，*0.5表示中間的點
y1 = int(size[1] * 3/4) # size[1]取元組的第二個值，*0.1表示距離底部近
y2 = int(size[1] * 1/6)
time.sleep(4)
self.driver.swipe(x1, y1, x1, y2, 1000)
3.3 向下滑動，即x軸不變，y軸增大
def swipeUp(self):
'''
頁面向上滑動
:return:
'''
size = self.get_myWindow_size()
MyLog.logger().info("size :" +str(size[0])+','+str(size[1]))
x1 = int(size[0] * 0.5) # size[0]取元組的第一個值，*0.5表示中間的點
y1 = int(size[1] * 1/6) # size[1]取元組的第二個值，*0.1表示距離底部近
y2 = int(size[1] * 3/4)
time.sleep(4)
self.driver.swipe(x1, y1, x1, y2, 1000)
3.4 向右滑動 ，即x減小，y軸不變
def swipRight(self):
'''
頁面向右滑動
:return:
'''
size = self.get_myWindow_size()
MyLog.logger().info("size :" +str(size[0])+','+str(size[1]))
x1 = int(size[0] * 0.5) # size[0]取元組的第一個值，*0.5表示中間的點
x2 = int(size[0] * 0.25) # size[0]取元組的第一個值，*0.5表示中間的點
y1 = int(size[1] * 3/4) # size[1]取元組的第二個值，*0.1表示距離底部近
y2 = int(size[1] * 1/6)
time.sleep(4)
self.driver.swipe(x1, y1, x2, y1, 1000)
3.5 向左滑動，即x軸增大，y軸不變
def swipLeft(self):
'''
頁面向左滑動
:return:
'''
size = self.get_myWindow_size()
MyLog.logger().info("size :" +str(size[0])+','+str(size[1]))
x1 = int(size[0] * 0.25) # size[0]取元組的第一個值，*0.5表示中間的點
x2 = int(size[0] * 0.75) # size[0]取元組的第一個值，*0.5表示中間的點
y1 = int(size[1] * 3/4) # size[1]取元組的第二個值，*0.1表示距離底部近
y2 = int(size[1] * 1/6)
time.sleep(4)
self.driver.swipe(x1, y1, x2, y1, 1000)
————————————————
版權聲明：本文為CSDN博主「chushujin」的原創文章，鏈接 https://blog.csdn.net/chushujin/article/details/104082472