一定成功 k8s 安裝helm v2.17 基本命令

 

 

 

一、下載helm安裝腳本

 

1.1 介紹 

 

• Helm是Kubernetes的包管理器。
• 其實就是管理了一推配置文件，ds，configmap，deployment......，一類規則。

    就類似：

1. yum是centos的包管理器。
2. apt-get是ubuntu的包管理器。
3. pip是python的包管理器。
4. npm是nodejs的包管理器。

 

 

1.2 下載helm安裝腳本

# 這樣下載的都是master 最新版的。
curl https://raw.githubusercontent.com/helm/helm/master/scripts/get > get_helm.sh

# 我這下載的是v2.17.0版本的
curl https://raw.githubusercontent.com/helm/helm/v2.17.0/scripts/get > get_helm.sh

 

 

1.3 安裝helm客戶端

# 正常是執行安裝腳本就行，腳本會幫你去下載安裝包，並且安裝。
bash get_helm.sh

 

注：由於國內網絡原因，下載helm安裝包時會失敗，所以我已經把安裝包下載到本地，並修改了安裝腳本。安裝包和安裝腳本都放同級目錄下。

安裝包：鏈接: https://pan.baidu.com/s/1fmhhSE3zAO2bNdlvV38KMA  密碼: acdv

安裝腳本：猛擊這里

 

查看代碼

#!/usr/bin/env bash
 
# Copyright The Helm Authors.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
 
# The install script is based off of the MIT-licensed script from glide,
# the package manager for Go: https://github.com/Masterminds/glide.sh/blob/master/get
 
PROJECT_NAME="helm"
TILLER_NAME="tiller"
 
: ${USE_SUDO:="true"}
: ${HELM_INSTALL_DIR:="/usr/local/bin"}
 
# initArch discovers the architecture for this system.
initArch() {
  ARCH=$(uname -m)
  case $ARCH in
    armv5*) ARCH="armv5";;
    armv6*) ARCH="armv6";;
    armv7*) ARCH="arm";;
    aarch64) ARCH="arm64";;
    x86) ARCH="386";;
    x86_64) ARCH="amd64";;
    i686) ARCH="386";;
    i386) ARCH="386";;
  esac
}
 
# initOS discovers the operating system for this system.
initOS() {
  OS=$(echo `uname`|tr '[:upper:]' '[:lower:]')
 
  case "$OS" in
    # Minimalist GNU for Windows
    mingw*) OS='windows';;
  esac
}
 
# runs the given command as root (detects if we are root already)
runAsRoot() {
  if [ $EUID -ne 0 -a "$USE_SUDO" = "true" ]; then
    sudo "${@}"
  else
    "${@}"
  fi
}
 
# verifySupported checks that the os/arch combination is supported for
# binary builds.
verifySupported() {
  local supported="darwin-amd64\nlinux-386\nlinux-amd64\nlinux-arm\nlinux-arm64\nlinux-ppc64le\nlinux-s390x\nwindows-amd64"
  if ! echo "${supported}" | grep -q "${OS}-${ARCH}"; then
    echo "No prebuilt binary for ${OS}-${ARCH}."
    echo "To build from source, go to https://github.com/helm/helm"
    exit 1
  fi
 
  if ! type "curl" > /dev/null && ! type "wget" > /dev/null; then
    echo "Either curl or wget is required"
    exit 1
  fi
}
 
# checkDesiredVersion checks if the desired version is available.
checkDesiredVersion() {
  if [ "x$DESIRED_VERSION" == "x" ]; then
    # Pinning tag to v2.17.0 as per https://github.com/helm/helm/issues/9607
    TAG=v2.17.0
  else
    TAG=$DESIRED_VERSION
  fi
}
 
# checkHelmInstalledVersion checks which version of helm is installed and
# if it needs to be changed.
checkHelmInstalledVersion() {
  if [[ -f "${HELM_INSTALL_DIR}/${PROJECT_NAME}" ]]; then
    local version=$("${HELM_INSTALL_DIR}/${PROJECT_NAME}" version -c | grep '^Client' | cut -d'"' -f2)
    if [[ "$version" == "$TAG" ]]; then
      echo "Helm ${version} is already ${DESIRED_VERSION:-latest}"
      return 0
    else
      echo "Helm ${TAG} is available. Changing from version ${version}."
      return 1
    fi
  else
    return 1
  fi
}
 
# downloadFile downloads the latest binary package and also the checksum
# for that binary.
downloadFile() {
  HELM_DIST="helm-$TAG-$OS-$ARCH.tar.gz"
  DOWNLOAD_URL="https://get.helm.sh/$HELM_DIST"
  CHECKSUM_URL="$DOWNLOAD_URL.sha256"
  HELM_TMP_ROOT="$(mktemp -dt helm-installer-XXXXXX)"
  HELM_TMP_FILE="$HELM_TMP_ROOT/$HELM_DIST"
  HELM_SUM_FILE="$HELM_TMP_ROOT/$HELM_DIST.sha256"
  echo "Downloading $DOWNLOAD_URL"
  if type "curl" > /dev/null; then
    curl -SsL "$CHECKSUM_URL" -o "$HELM_SUM_FILE"
  elif type "wget" > /dev/null; then
    wget -q -O "$HELM_SUM_FILE" "$CHECKSUM_URL"
  fi
  if type "curl" > /dev/null; then
    #curl -SsL "$DOWNLOAD_URL" -o "$HELM_TMP_FILE"
    cp -rf ./helm-v2.17.0-linux-amd64.tar.gz $HELM_TMP_FILE    # 就修改了這個地方 讓腳本直接復制的本地包。
  elif type "wget" > /dev/null; then
    wget -q -O "$HELM_TMP_FILE" "$DOWNLOAD_URL"
  fi
}
 
# installFile verifies the SHA256 for the file, then unpacks and
# installs it.
installFile() {
  HELM_TMP="$HELM_TMP_ROOT/$PROJECT_NAME"
  local sum=$(openssl sha1 -sha256 ${HELM_TMP_FILE} | awk '{print $2}')
  local expected_sum=$(cat ${HELM_SUM_FILE})
  if [ "$sum" != "$expected_sum" ]; then
    echo "SHA sum of ${HELM_TMP_FILE} does not match. Aborting."
    exit 1
  fi
 
  mkdir -p "$HELM_TMP"
  tar xf "$HELM_TMP_FILE" -C "$HELM_TMP"
  HELM_TMP_BIN="$HELM_TMP/$OS-$ARCH/$PROJECT_NAME"
  TILLER_TMP_BIN="$HELM_TMP/$OS-$ARCH/$TILLER_NAME"
  echo "Preparing to install $PROJECT_NAME and $TILLER_NAME into ${HELM_INSTALL_DIR}"
  runAsRoot cp "$HELM_TMP_BIN" "$HELM_INSTALL_DIR"
  echo "$PROJECT_NAME installed into $HELM_INSTALL_DIR/$PROJECT_NAME"
  if [ -x "$TILLER_TMP_BIN" ]; then
    runAsRoot cp "$TILLER_TMP_BIN" "$HELM_INSTALL_DIR"
    echo "$TILLER_NAME installed into $HELM_INSTALL_DIR/$TILLER_NAME"
  else
    echo "info: $TILLER_NAME binary was not found in this release; skipping $TILLER_NAME installation"
  fi
}
 
# fail_trap is executed if an error occurs.
fail_trap() {
  result=$?
  if [ "$result" != "0" ]; then
    if [[ -n "$INPUT_ARGUMENTS" ]]; then
      echo "Failed to install $PROJECT_NAME with the arguments provided: $INPUT_ARGUMENTS"
      help
    else
      echo "Failed to install $PROJECT_NAME"
    fi
    echo -e "\tFor support, go to https://github.com/helm/helm."
  fi
  cleanup
  exit $result
}
 
# testVersion tests the installed client to make sure it is working.
testVersion() {
  set +e
  HELM="$(command -v $PROJECT_NAME)"
  if [ "$?" = "1" ]; then
    echo "$PROJECT_NAME not found. Is $HELM_INSTALL_DIR on your "'$PATH?'
    exit 1
  fi
  set -e
  echo "Run '$PROJECT_NAME init' to configure $PROJECT_NAME."
}
 
# help provides possible cli installation arguments
help () {
  echo "Accepted cli arguments are:"
  echo -e "\t[--help|-h ] ->> prints this help"
  echo -e "\t[--version|-v <desired_version>]"
  echo -e "\te.g. --version v2.4.0  or -v latest"
  echo -e "\t[--no-sudo]  ->> install without sudo"
}
 
# cleanup temporary files to avoid https://github.com/helm/helm/issues/2977
cleanup() {
  if [[ -d "${HELM_TMP_ROOT:-}" ]]; then
    rm -rf "$HELM_TMP_ROOT"
  fi
}
 
# Execution
 
#Stop execution on any error
trap "fail_trap" EXIT
set -e
 
# Parsing input arguments (if any)
export INPUT_ARGUMENTS="${@}"
set -u
while [[ $# -gt 0 ]]; do
  case $1 in
    '--version'|-v)
       shift
       if [[ $# -ne 0 ]]; then
           export DESIRED_VERSION="${1}"
       else
           echo -e "Please provide the desired version. e.g. --version v2.4.0 or -v latest"
           exit 0
       fi
       ;;
    '--no-sudo')
       USE_SUDO="false"
       ;;
    '--help'|-h)
       help
       exit 0
       ;;
    *) exit 1
       ;;
  esac
  shift
done
set +u
 
initArch
initOS
verifySupported
checkDesiredVersion
if ! checkHelmInstalledVersion; then
  downloadFile
  installFile
fi
testVersion
cleanup

 

 

 

二、安裝tiller

說白了就是接收到helm發送的請求，然后根據一系類 的配置文件生成k8s的部署文件（yaml文件），然后提交給k8s。

 

2.1 安裝socat

socat是解決helm連接不上tiller問題。一個通信的問題。

報錯如下：

[root@k8s-master hello-svc]# helm version
Client: &version.Version{SemVer:"v2.17.0", GitCommit:"6af75a8fd72e2aa18a2b278cfe5c7a1c5feca7f2", GitTreeState:"clean"}
E0224 14:13:16.077226    7416 portforward.go:331] an error occurred forwarding 37271 -> 44134: error forwarding port 44134 to pod 76a7312e49220a229e443546a4b32d3e0406f09fd9b3646b3d30f6833e121375, uid : unable to do port forwarding: socat not found.
Error: cannot connect to Tiller

 

解決：安裝一下這個包就行

yum -y install socat
###########
apt-get -y install socat

 

 

2.2 創建tiller rbac授權

首先tiller想要把配置文件提交給k8s，那么它肯定需要權限才行。

所以這一步就是給tiller權限。

 

# 一個sa，然后把sa綁定給admin角色。這樣這個sa就有集群的admin 所有權限。然后tiller使用這個sa就行。

kubectl create -f heml-rbac.yaml


apiVersion: v1
kind: ServiceAccount
metadata:
  name: tiller
  namespace: kube-system
---
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRoleBinding
metadata:
  name: tiller
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: ClusterRole
  name: cluster-admin
subjects:
  - kind: ServiceAccount
    name: tiller
    namespace: kube-system

 

傳送門：k8s  rbac權限隨筆

 

 

2.3 初始化helm

其實就是在k8s起了一個tiller pod。

# 使用的鏡像要和helm版本一樣
# stable-repo-url 是倉庫地址，就是類似於yum倉庫的源。
# service-account 指定上面創建的sa
# --history-max 設置最大歷史記錄,大限制清除，如果沒有設置最大歷史記錄，則無限期地保留歷史記錄.
 
 
helm init --upgrade -i registry.cn-hangzhou.aliyuncs.com/google_containers/tiller:v2.17.0 --stable-repo-url https://kubernetes.oss-cn-hangzhou.aliyuncs.com/charts --service-account=tiller --history-max 50

 

 

2.4 驗證

# 這樣就是安裝成功了
 
[root@zm-qa-k8s40 v2.0]# helm version
Client: &version.Version{SemVer:"v2.17.0", GitCommit:"a690bad98af45b015bd3da1a41f6218b1a451dbe", GitTreeState:"clean"}
Server: &version.Version{SemVer:"v2.17.0", GitCommit:"a690bad98af45b015bd3da1a41f6218b1a451dbe", GitTreeState:"clean"}

 

 

 

三、常用命令

 

# 查看版本

helm version



# 查看當前安裝的charts

helm list



# 查詢 charts

helm search [release_name]



# 安裝charts

helm install --name redis --namespaces prod bitnami/redis



# 查看charts狀態

helm status [release_name]



# 刪除charts

helm delete --purge [release_name]



# 增加repo

helm repo add stable https://kubernetes.oss-cn-hangzhou.aliyuncs.com/charts

helm repo add --username admin --password password myharbor https://xxx.ooo.com



# 更新repo倉庫資源

helm repo update



# 創建charts

helm create helm_charts



# 測試charts語法

helm lint



# 打包charts

cd helm_charts && helm package ./



#查看生成的yaml文件

helm  template  helm_charts-0.1.1.tgz



# 更新image

helm upgrade --set image.tag='v2021-12-22-10-48-40' study-api-en-oral myharbor/study-api-en-oral



# 回滾relase

helm hist study-api-en-oral

helm rollback study-api-en-oral 4


#升級版本
helm upgrade [release_name] .
helm upgrade -f values.yaml [release_name]  .
helm upgrade [release_name] --set image.tag='latest'