vmware虛擬化，在安裝esxi主機時，使用固態硬盤要注意，勿使用服務器的RAID卡配置程序，將硬盤用RAID0配置，否則esxi將不能正確識別出SSD固態硬盤，會作為普通硬盤使用，但在大多數情況下，具體環境並不是這樣的，如果做了raid，可以手工進行更改，更改方法如下：
用SSH連接工具，登陸esxi主機，
輸入如下命令
[root@MiWiFi-RM2100-srv:~] esxcli storage nmp device list
mpx.vmhba1:C0:T7:L0
Device Display Name: Local HL-DT-ST CD-ROM (mpx.vmhba1:C0:T7:L0)
Storage Array Type: VMW_SATP_LOCAL
Storage Array Type Device Config: SATP VMW_SATP_LOCAL does not support device configuration.
Path Selection Policy: VMW_PSP_FIXED
Path Selection Policy Device Config: {preferred=vmhba1:C0:T7:L0;current=vmhba1:C0:T7:L0}
Path Selection Policy Device Custom Config:
Working Paths: vmhba1:C0:T7:L0
Is USB: false
naa.50000396a1b811a9
Device Display Name: Local ATA Disk (naa.50000396a1b811a9)
Storage Array Type: VMW_SATP_LOCAL
Storage Array Type Device Config: SATP VMW_SATP_LOCAL does not support device configuration.
Path Selection Policy: VMW_PSP_FIXED
Path Selection Policy Device Config: {preferred=vmhba2:C0:T3:L0;current=vmhba2:C0:T3:L0}
Path Selection Policy Device Custom Config:
Working Paths: vmhba2:C0:T3:L0
Is USB: false
naa.6004e010018f0900251dfa04035dd4ff
Device Display Name: Local DELL Disk (naa.6004e010018f0900251dfa04035dd4ff)
Storage Array Type: VMW_SATP_LOCAL
Storage Array Type Device Config: SATP VMW_SATP_LOCAL does not support device configuration.
Path Selection Policy: VMW_PSP_FIXED
Path Selection Policy Device Config: {preferred=vmhba2:C2:T0:L0;current=vmhba2:C2:T0:L0}
Path Selection Policy Device Custom Config:
Working Paths: vmhba2:C2:T0:L0
Is USB: false
[root@MiWiFi-RM2100-srv:~]
重新設置磁盤屬性
清除該硬盤的驅動器類型SSD標識：
esxcli storage nmp satp rule remove -s VMW_SATP_LOCAL --device naa.50000396a1b811a9 --option="enable_ssd" - 1
開啟該硬盤的驅動器類型SSD標識：
esxcli storage nmp satp rule add -s VMW_SATP_LOCAL --device naa.50000396a1b811a9 --option="enable_ssd" - 1
重啟ESXI
使用reboot命令或者再控制台點擊重啟
# esxcli storage nmp device list
#列出儲存清單（SSD設備的“device name”，
其實可以在GUI內看到；也可以通過“esxcli storage core device list”指令，確認SSD設備的“device name”）
esxcli storage nmp satp rule remove -s VMW_SATP_LOCAL --device naa.6b083fe0ce7f2a0028d86ea311b0e3c6 --option="enable_ssd"
esxcli storage nmp satp rule add -s VMW_SATP_LOCAL --device naa.6b083fe0ce7f2a0028d86ea311b0e3c6 --option="enable_ssd" #執行指令，將未識別的SSD設備設置為SSD