批處理文件（bat）實現內外網IP切換

@echo off
rem 強制獲取管理員權限
%1 mshta vbscript:CreateObject("Shell.Application").ShellExecute("cmd.exe","/c %~s0 ::","","runas",1)(window.close)&&exit
rem //設置變量
set NAME="以太網"
rem //可以根據需要更改以下屬性值
set ADDR=192.168.1.1
set MASK=255.255.255.0
set GATEWAY=192.168.1.254
set DNS1=59.11.99.66
set DNS2=

rem //可以根據需要更改以下屬性值
set ADDR_YF=10.0.2.1
set MASK_YF=255.255.255.0
set GATEWAY_YF=10.0.2.254
set DNS1_YF=none
set DNS2_YF=


rem //以上屬性為IP地址、子網掩碼、網關、首選DNS和備用DNS

echo 當前可用的操作包括:

echo 1 設置外網IP

echo 2 設置研發網IP

echo 3 退出

echo 請選擇你要的操作:
set /p operate=
if %operate%==1 goto 1
if %operate%==2 goto 2
if %operate%==3 goto 3


:1
echo 設置外網IP中, 請稍等...
rem //可以根據你的需要進行更改
echo IP_ADDR = %ADDR%
echo MASK = %MASK%
echo GATEWAY = %GATEWAY%
netsh interface ipv4 set address %NAME% static %ADDR% %MASK% %GATEWAY% 
echo 首選DNS = %DNS1% 
if "%DNS1%"=="" (echo DNS1為空) else netsh interface ipv4 set dns %NAME% static %DNS1% primary
echo 備用DNS = %DNS2% 
if "%DNS2%"=="" (echo DNS2為空) else (netsh interface ipv4 add dns %NAME% %DNS2%) 
echo **********設置為外網IP成功:%ADDR%***********
pause
goto 3


:2
echo 設置研發網IP中, 請稍等...
rem //可以根據你的需要進行更改
echo IP_ADDR = %ADDR_YF%
echo MASK = %MASK_YF%
echo GATEWAY = %GATEWAY_YF%
netsh interface ipv4 set address %NAME% static %ADDR_YF% %MASK_YF% %GATEWAY_YF% 
echo 首選DNS = %DNS1_YF% 
if "%DNS1%"=="" (echo DNS1為空) else netsh interface ipv4 set dns %NAME% static %DNS1_YF% primary
echo 備用DNS = %DNS2% 
if "%DNS2%"=="" (echo DNS2為空) else (netsh interface ipv4 add dns %NAME% %DNS2_YF%) 
echo **********設置研發網IP成功:%ADDR_YF%***********
pause
goto 3


:3
exit