Kubernetes全棧架構師（二進制高可用安裝k8s集群部署篇）--學習筆記

本文轉載自查看原文 2021-07-19 00:04 616 【014】Kubernetes全棧架構師

vi /etc/hosts

127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4
::1         localhost localhost.localdomain localhost6 localhost6.localdomain6

192.168.232.128 k8s-master01
192.168.232.129 k8s-master02
192.168.232.130 k8s-master03
192.168.232.236 k8s-master-lb # 如果不是高可用集群，該IP為Master01的IP
192.168.232.131 k8s-node01
192.168.232.132 k8s-node02

host節點主要是控制節點使用，控制節點下載一些文件，然后通過sskey傳到其他的節點上面

CentOS 7安裝yum源如下：

curl -o /etc/yum.repos.d/CentOS-Base.repo https://mirrors.aliyun.com/repo/Centos-7.repo
yum install -y yum-utils device-mapper-persistent-data lvm2
yum-config-manager --add-repo https://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo
sed -i -e '/mirrors.cloud.aliyuncs.com/d' -e '/mirrors.aliyuncs.com/d' /etc/yum.repos.d/CentOS-Base.repo

必備工具安裝

yum install wget jq psmisc vim net-tools telnet yum-utils device-mapper-persistent-data lvm2 git -y

所有節點關閉firewalld 、dnsmasq、selinux(CentOS7需要關閉NetworkManager，CentOS8不需要)

systemctl disable --now firewalld 
systemctl disable --now dnsmasq
systemctl disable --now NetworkManager

setenforce 0
sed -i 's#SELINUX=enforcing#SELINUX=disabled#g' /etc/sysconfig/selinux
sed -i 's#SELINUX=enforcing#SELINUX=disabled#g' /etc/selinux/config

所有節點關閉swap分區，fstab注釋swap

swapoff -a && sysctl -w vm.swappiness=0
sed -ri '/^[^#]*swap/s@^@#@' /etc/fstab

所有節點同步時間

安裝ntpdate

rpm -ivh http://mirrors.wlnmp.com/centos/wlnmp-release-centos.noarch.rpm
yum install ntpdate -y

所有節點同步時間。時間同步配置如下：

ln -sf /usr/share/zoneinfo/Asia/Shanghai /etc/localtime
echo 'Asia/Shanghai' >/etc/timezone
ntpdate time2.aliyun.com

檢查時間

date

加入到crontab

crontab -e

# 添加以下內容
*/5 * * * * /usr/sbin/ntpdate time2.aliyun.com

所有節點配置limit：

ulimit -SHn 65535

vim /etc/security/limits.conf
# 末尾添加如下內容
* soft nofile 655360
* hard nofile 131072
* soft nproc 655350
* hard nproc 655350
* soft memlock unlimited
* hard memlock unlimited

Master01節點（取消發送鍵輸到入所有會話）免密鑰登錄其他節點，安裝過程中生成配置文件和證書均在Master01上操作，集群管理也在Master01上操作，阿里雲或者AWS上需要單獨一台kubectl服務器。密鑰配置如下：

ssh-keygen -t rsa

Master01配置免密碼登錄其他節點

for i in k8s-master01 k8s-master02 k8s-master03 k8s-node01 k8s-node02;do ssh-copy-id -i .ssh/id_rsa.pub $i;done

所有節點安裝基本工具（發送鍵輸到入所有會話）

yum install wget jq psmisc vim net-tools yum-utils device-mapper-persistent-data lvm2 git -y

Master01下載安裝文件（取消發送鍵輸到入所有會話）

cd /root/ ; git clone https://github.com/dotbalo/k8s-ha-install.git

無法下載的可以通過本地拉取壓縮再上傳到服務器

yum安裝zip

yum install -y unzip zip

解壓文件

unzip k8s-ha-install.zip

所有節點（發送鍵輸到入所有會話）升級系統並重啟，此處升級沒有升級內核，下節會單獨升級內核：

yum update -y --exclude=kernel* && reboot #CentOS7需要升級，CentOS8可以按需升級系統

二進制系統和內核升級

CentOS7 需要升級內核至4.18+，本地升級的版本為4.19

在master01節點（取消發送鍵輸入到所有會話）下載內核：

cd /root
wget http://193.49.22.109/elrepo/kernel/el7/x86_64/RPMS/kernel-ml-devel-4.19.12-1.el7.elrepo.x86_64.rpm
wget http://193.49.22.109/elrepo/kernel/el7/x86_64/RPMS/kernel-ml-4.19.12-1.el7.elrepo.x86_64.rpm

從master01節點傳到其他節點：

for i in k8s-master02 k8s-master03 k8s-node01 k8s-node02;do scp kernel-ml-4.19.12-1.el7.elrepo.x86_64.rpm kernel-ml-devel-4.19.12-1.el7.elrepo.x86_64.rpm $i:/root/ ; done

所有節點安裝內核（發送鍵輸到入所有會話）

cd /root && yum localinstall -y kernel-ml*

所有節點更改內核啟動順序

grub2-set-default  0 && grub2-mkconfig -o /etc/grub2.cfg

grubby --args="user_namespace.enable=1" --update-kernel="$(grubby --default-kernel)"

檢查默認內核是不是4.19

grubby --default-kernel

所有節點重啟，然后檢查內核是不是4.19

reboot

uname -a

所有節點安裝ipvsadm（實現負載均衡）：

yum install ipvsadm ipset sysstat conntrack libseccomp -y

所有節點配置ipvs模塊，在內核4.19+版本nf_conntrack_ipv4已經改為nf_conntrack， 4.18以下使用nf_conntrack_ipv4即可：

modprobe -- ip_vs
modprobe -- ip_vs_rr
modprobe -- ip_vs_wrr
modprobe -- ip_vs_sh
modprobe -- nf_conntrack
vim /etc/modules-load.d/ipvs.conf 
	# 加入以下內容
ip_vs
ip_vs_lc
ip_vs_wlc
ip_vs_rr
ip_vs_wrr
ip_vs_lblc
ip_vs_lblcr
ip_vs_dh
ip_vs_sh
ip_vs_fo
ip_vs_nq
ip_vs_sed
ip_vs_ftp
ip_vs_sh
nf_conntrack
ip_tables
ip_set
xt_set
ipt_set
ipt_rpfilter
ipt_REJECT
ipip

然后執行

systemctl enable --now systemd-modules-load.service

檢查是否加載（需要重啟后才可以加載）：

lsmod | grep -e ip_vs -e nf_conntrack

開啟一些k8s集群中必須的內核參數，所有節點配置k8s內核：

cat <<EOF > /etc/sysctl.d/k8s.conf
net.ipv4.ip_forward = 1
net.bridge.bridge-nf-call-iptables = 1
net.bridge.bridge-nf-call-ip6tables = 1
fs.may_detach_mounts = 1
vm.overcommit_memory=1
vm.panic_on_oom=0
fs.inotify.max_user_watches=89100
fs.file-max=52706963
fs.nr_open=52706963
net.netfilter.nf_conntrack_max=2310720

net.ipv4.tcp_keepalive_time = 600
net.ipv4.tcp_keepalive_probes = 3
net.ipv4.tcp_keepalive_intvl =15
net.ipv4.tcp_max_tw_buckets = 36000
net.ipv4.tcp_tw_reuse = 1
net.ipv4.tcp_max_orphans = 327680
net.ipv4.tcp_orphan_retries = 3
net.ipv4.tcp_syncookies = 1
net.ipv4.tcp_max_syn_backlog = 16384
net.ipv4.ip_conntrack_max = 65536
net.ipv4.tcp_max_syn_backlog = 16384
net.ipv4.tcp_timestamps = 0
net.core.somaxconn = 16384
EOF
sysctl --system

net.ipv4.ip_forward 不打開的話跨主機通訊不了

所有節點配置完內核后，重啟服務器，保證重啟后內核依舊加載

reboot

lsmod | grep --color=auto -e ip_vs -e nf_conntrack

二進制基本組件安裝

Docker安裝
K8s及etcd安裝

Docker安裝

所有節點安裝Docker-ce 19.03（官方推薦）

yum install docker-ce-19.03.* -y

由於新版kubelet建議使用systemd，所以可以把docker的CgroupDriver改成systemd

mkdir /etc/docker
cat > /etc/docker/daemon.json <<EOF
{
  "exec-opts": ["native.cgroupdriver=systemd"]
}
EOF

所有節點設置開機自啟動Docker：

systemctl daemon-reload && systemctl enable --now docker

K8s及etcd安裝

Master01（取消發送鍵輸入到所有的會話）下載kubernetes安裝包

訪問官網獲取最新版本：https://github.com/kubernetes/kubernetes

進入CHANGELOG目錄，點擊 CHANGELOG-1.20.md，再點擊 Server Binaries，可以看到目前最新的是1.20.9，點擊 kubernetes-server-linux-amd64.tar.gz 進行下載，如果有更新的版本需要下載最新的 1.20.x 版本

wget https://dl.k8s.io/v1.20.9/kubernetes-server-linux-amd64.tar.gz

如果下載不了可以通過本地下載再上傳到服務器

下載etcd安裝包（3.4.13是官方推薦版本，已經經過驗證）

wget https://github.com/etcd-io/etcd/releases/download/v3.4.13/etcd-v3.4.13-linux-amd64.tar.gz

如果下載不了可以通過本地下載再上傳到服務器

二進制的安裝其實解壓之后就安裝完成了

解壓kubernetes安裝文件

tar -xf kubernetes-server-linux-amd64.tar.gz  --strip-components=3 -C /usr/local/bin kubernetes/server/bin/kube{let,ctl,-apiserver,-controller-manager,-scheduler,-proxy}

解壓etcd安裝文件

tar -zxvf etcd-v3.4.13-linux-amd64.tar.gz --strip-components=1 -C /usr/local/bin etcd-v3.4.13-linux-amd64/etcd{,ctl}

版本查看

kubelet --version

etcdctl version

將組件發送到其他節點

MasterNodes='k8s-master02 k8s-master03'
WorkNodes='k8s-node01 k8s-node02'
for NODE in $MasterNodes; do echo $NODE; scp /usr/local/bin/kube{let,ctl,-apiserver,-controller-manager,-scheduler,-proxy} $NODE:/usr/local/bin/; scp /usr/local/bin/etcd* $NODE:/usr/local/bin/; done
for NODE in $WorkNodes; do     scp /usr/local/bin/kube{let,-proxy} $NODE:/usr/local/bin/ ; done

所有節點創建/opt/cni/bin目錄（發送鍵輸入到所有的會話）

mkdir -p /opt/cni/bin

查看分支（取消發送鍵輸入到所有的會話）

cd k8s-ha-install/

git branch -a

Master01切換到1.20.x分支（其他版本可以切換到其他分支）

git checkout manual-installation-v1.20.x

二進制生成證書詳解

etcd證書
k8s組件證書

二進制安裝最關鍵步驟，一步錯誤全盤皆輸，一定要注意每個步驟都要是正確的

Master01下載生成證書工具

wget "https://pkg.cfssl.org/R1.2/cfssl_linux-amd64" -O /usr/local/bin/cfssl

wget "https://pkg.cfssl.org/R1.2/cfssljson_linux-amd64" -O /usr/local/bin/cfssljson

chmod +x /usr/local/bin/cfssl /usr/local/bin/cfssljson

etcd證書

所有Master節點創建etcd證書目錄（發送鍵輸入到所有的會話，取消node節點）

mkdir /etc/etcd/ssl -p

所有節點創建kubernetes相關目錄（發送鍵輸入到所有的會話）

mkdir -p /etc/kubernetes/pki

Master01節點生成etcd證書（取消發送鍵輸入到所有的會話）

生成證書的CSR文件：證書簽名請求文件，配置了一些域名、公司、單位

# 這個目錄有我們生成證書需要用到的csr文件
cd /root/k8s-ha-install/pki

# 生成etcd CA證書和CA證書的key
cfssl gencert -initca etcd-ca-csr.json | cfssljson -bare /etc/etcd/ssl/etcd-ca

查看生成的key

ls /etc/etcd/ssl/

頒發證書

cfssl gencert \
   -ca=/etc/etcd/ssl/etcd-ca.pem \
   -ca-key=/etc/etcd/ssl/etcd-ca-key.pem \
   -config=ca-config.json \
   -hostname=127.0.0.1,k8s-master01,k8s-master02,k8s-master03,192.168.232.128,192.168.232.129,192.168.232.130 \
   -profile=kubernetes \
   etcd-csr.json | cfssljson -bare /etc/etcd/ssl/etcd

查看生成證書

ls /etc/etcd/ssl/

生成內容

etcd-ca.csr  etcd-ca-key.pem  etcd-ca.pem  etcd.csr  etcd-key.pem  etcd.pem

將證書復制到其他節點

MasterNodes='k8s-master02 k8s-master03'
WorkNodes='k8s-node01 k8s-node02'

for NODE in $MasterNodes; do
     ssh $NODE "mkdir -p /etc/etcd/ssl"
     for FILE in etcd-ca-key.pem  etcd-ca.pem  etcd-key.pem  etcd.pem; do
       scp /etc/etcd/ssl/${FILE} $NODE:/etc/etcd/ssl/${FILE}
     done
 done

k8s組件證書

Master01生成kubernetes證書

cd /root/k8s-ha-install/pki

cfssl gencert -initca ca-csr.json | cfssljson -bare /etc/kubernetes/pki/ca

查看生成的key

ls /etc/kubernetes/pki

生成apiserver的客戶端證書

10.96.0.是k8s service的網段，如果說需要更改k8s service網段，那就需要更改10.96.0.1，如果不是高可用集群，192.168.232.236為Master01的IP

cfssl gencert   -ca=/etc/kubernetes/pki/ca.pem   -ca-key=/etc/kubernetes/pki/ca-key.pem   -config=ca-config.json   -hostname=10.96.0.1,192.168.232.236,127.0.0.1,kubernetes,kubernetes.default,kubernetes.default.svc,kubernetes.default.svc.cluster,kubernetes.default.svc.cluster.local,192.168.232.128,192.168.232.129,192.168.232.130   -profile=kubernetes   apiserver-csr.json | cfssljson -bare /etc/kubernetes/pki/apiserver

查看生成的證書

ls /etc/kubernetes/pki

生成apiserver的聚合證書。Requestheader-client-xxx requestheader-allowwd-xxx:aggerator

cfssl gencert   -initca front-proxy-ca-csr.json | cfssljson -bare /etc/kubernetes/pki/front-proxy-ca 

cfssl gencert   -ca=/etc/kubernetes/pki/front-proxy-ca.pem   -ca-key=/etc/kubernetes/pki/front-proxy-ca-key.pem   -config=ca-config.json   -profile=kubernetes   front-proxy-client-csr.json | cfssljson -bare /etc/kubernetes/pki/front-proxy-client

生成 controller-manage 的證書

cfssl gencert \
   -ca=/etc/kubernetes/pki/ca.pem \
   -ca-key=/etc/kubernetes/pki/ca-key.pem \
   -config=ca-config.json \
   -profile=kubernetes \
   manager-csr.json | cfssljson -bare /etc/kubernetes/pki/controller-manager

# 注意，如果不是高可用集群，192.168.232.236:8443改為master01的地址，8443改為apiserver的端口，默認是6443
# set-cluster：設置一個集群項
kubectl config set-cluster kubernetes \
     --certificate-authority=/etc/kubernetes/pki/ca.pem \
     --embed-certs=true \
     --server=https://192.168.232.236:8443 \
     --kubeconfig=/etc/kubernetes/controller-manager.kubeconfig

# set-credentials 設置一個用戶項
kubectl config set-credentials system:kube-controller-manager \
     --client-certificate=/etc/kubernetes/pki/controller-manager.pem \
     --client-key=/etc/kubernetes/pki/controller-manager-key.pem \
     --embed-certs=true \
     --kubeconfig=/etc/kubernetes/controller-manager.kubeconfig

# 設置一個環境項，一個上下文
kubectl config set-context system:kube-controller-manager@kubernetes \
    --cluster=kubernetes \
    --user=system:kube-controller-manager \
    --kubeconfig=/etc/kubernetes/controller-manager.kubeconfig

# 使用某個環境當做默認環境
kubectl config use-context system:kube-controller-manager@kubernetes \
     --kubeconfig=/etc/kubernetes/controller-manager.kubeconfig

生成 scheduler 的證書

cfssl gencert \
   -ca=/etc/kubernetes/pki/ca.pem \
   -ca-key=/etc/kubernetes/pki/ca-key.pem \
   -config=ca-config.json \
   -profile=kubernetes \
   scheduler-csr.json | cfssljson -bare /etc/kubernetes/pki/scheduler

# 注意，如果不是高可用集群，192.168.232.236:8443改為master01的地址，8443改為apiserver的端口，默認是6443
kubectl config set-cluster kubernetes \
     --certificate-authority=/etc/kubernetes/pki/ca.pem \
     --embed-certs=true \
     --server=https://192.168.232.236:8443 \
     --kubeconfig=/etc/kubernetes/scheduler.kubeconfig

kubectl config set-credentials system:kube-scheduler \
     --client-certificate=/etc/kubernetes/pki/scheduler.pem \
     --client-key=/etc/kubernetes/pki/scheduler-key.pem \
     --embed-certs=true \
     --kubeconfig=/etc/kubernetes/scheduler.kubeconfig

kubectl config set-context system:kube-scheduler@kubernetes \
     --cluster=kubernetes \
     --user=system:kube-scheduler \
     --kubeconfig=/etc/kubernetes/scheduler.kubeconfig

kubectl config use-context system:kube-scheduler@kubernetes \
     --kubeconfig=/etc/kubernetes/scheduler.kubeconfig

生成admin的證書

cfssl gencert \
   -ca=/etc/kubernetes/pki/ca.pem \
   -ca-key=/etc/kubernetes/pki/ca-key.pem \
   -config=ca-config.json \
   -profile=kubernetes \
   admin-csr.json | cfssljson -bare /etc/kubernetes/pki/admin

# 注意，如果不是高可用集群，192.168.232.236:8443改為master01的地址，8443改為apiserver的端口，默認是6443
kubectl config set-cluster kubernetes     --certificate-authority=/etc/kubernetes/pki/ca.pem     --embed-certs=true     --server=https://192.168.232.236:8443     --kubeconfig=/etc/kubernetes/admin.kubeconfig

kubectl config set-credentials kubernetes-admin     --client-certificate=/etc/kubernetes/pki/admin.pem     --client-key=/etc/kubernetes/pki/admin-key.pem     --embed-certs=true     --kubeconfig=/etc/kubernetes/admin.kubeconfig

kubectl config set-context kubernetes-admin@kubernetes     --cluster=kubernetes     --user=kubernetes-admin     --kubeconfig=/etc/kubernetes/admin.kubeconfig

kubectl config use-context kubernetes-admin@kubernetes     --kubeconfig=/etc/kubernetes/admin.kubeconfig

我們用同樣的命令生成了 admin.kubeconfig，scheduler.kubeconfig，controller-manager.kubeconfig，它們之間是如何區分的？

查看 admin-csr.json

cat admin-csr.json

{
  "CN": "admin", # 域名
  "key": {
    "algo": "rsa",
    "size": 2048
  },
  "names": [
    {
      "C": "CN",
      "ST": "Beijing",
      "L": "Beijing",
      "O": "system:masters", # 部門，相當於admin是屬於哪個組的
      "OU": "Kubernetes-manual"
    }
  ]
}

我們生成的證書會定義一個用戶 admin，它是屬於 system:masters 這個組，k8s 安裝的時候會有一個 clusterrole，它是一個集群角色，相當於一個配置，它有着集群最高的管理權限，同時會創建一個 clusterrolebinding，它會把 admin 綁到 system:masters 這個組上，然后這個組上的所有用戶都會有這個集群的權限

創建ServiceAccount Key -> secret

openssl genrsa -out /etc/kubernetes/pki/sa.key 2048

openssl rsa -in /etc/kubernetes/pki/sa.key -pubout -out /etc/kubernetes/pki/sa.pub

ServiceAccount 是 k8s 一種認證方式，創建 ServiceAccount 的時候會創建一個與之綁定的 secret，這個 secret 會生成一個 token

發送證書至其他節點

for NODE in k8s-master02 k8s-master03; do 
for FILE in $(ls /etc/kubernetes/pki | grep -v etcd); do 
scp /etc/kubernetes/pki/${FILE} $NODE:/etc/kubernetes/pki/${FILE};
done; 
for FILE in admin.kubeconfig controller-manager.kubeconfig scheduler.kubeconfig; do 
scp /etc/kubernetes/${FILE} $NODE:/etc/kubernetes/${FILE};
done;
done

查看證書文件（一共23個文件）

ls /etc/kubernetes/pki/

ls /etc/kubernetes/pki/ |wc -l

查看證書過期時間（expiry 過期時間100年）

cat ca-config.json

{
  "signing": {
    "default": {
      "expiry": "876000h"
    },
    "profiles": {
      "kubernetes": {
        "usages": [
            "signing",
            "key encipherment",
            "server auth",
            "client auth"
        ],
        "expiry": "876000h"
      }
    }
  }
}

二進制高可用及etcd配置

Etcd配置
高可用配置

Etcd配置

etcd生產環境中一定要啟動奇數個節點，不然容易產生腦裂

etcd配置大致相同，注意修改每個Master節點的etcd配置的主機名和IP地址

注意三個節點的配置是不同的

Master01

vim /etc/etcd/etcd.config.yml

name: 'k8s-master01'
data-dir: /var/lib/etcd
wal-dir: /var/lib/etcd/wal
snapshot-count: 5000
heartbeat-interval: 100
election-timeout: 1000
quota-backend-bytes: 0
listen-peer-urls: 'https://192.168.232.128:2380'
listen-client-urls: 'https://192.168.232.128:2379,http://127.0.0.1:2379'
max-snapshots: 3
max-wals: 5
cors:
initial-advertise-peer-urls: 'https://192.168.232.128:2380'
advertise-client-urls: 'https://192.168.232.128:2379'
discovery:
discovery-fallback: 'proxy'
discovery-proxy:
discovery-srv:
initial-cluster: 'k8s-master01=https://192.168.232.128:2380,k8s-master02=https://192.168.232.129:2380,k8s-master03=https://192.168.232.130:2380'
initial-cluster-token: 'etcd-k8s-cluster'
initial-cluster-state: 'new'
strict-reconfig-check: false
enable-v2: true
enable-pprof: true
proxy: 'off'
proxy-failure-wait: 5000
proxy-refresh-interval: 30000
proxy-dial-timeout: 1000
proxy-write-timeout: 5000
proxy-read-timeout: 0
client-transport-security:
  cert-file: '/etc/kubernetes/pki/etcd/etcd.pem'
  key-file: '/etc/kubernetes/pki/etcd/etcd-key.pem'
  client-cert-auth: true
  trusted-ca-file: '/etc/kubernetes/pki/etcd/etcd-ca.pem'
  auto-tls: true
peer-transport-security:
  cert-file: '/etc/kubernetes/pki/etcd/etcd.pem'
  key-file: '/etc/kubernetes/pki/etcd/etcd-key.pem'
  peer-client-cert-auth: true
  trusted-ca-file: '/etc/kubernetes/pki/etcd/etcd-ca.pem'
  auto-tls: true
debug: false
log-package-levels:
log-outputs: [default]
force-new-cluster: false

Master02

vim /etc/etcd/etcd.config.yml

name: 'k8s-master02'
data-dir: /var/lib/etcd
wal-dir: /var/lib/etcd/wal
snapshot-count: 5000
heartbeat-interval: 100
election-timeout: 1000
quota-backend-bytes: 0
listen-peer-urls: 'https://192.168.232.129:2380'
listen-client-urls: 'https://192.168.232.129:2379,http://127.0.0.1:2379'
max-snapshots: 3
max-wals: 5
cors:
initial-advertise-peer-urls: 'https://192.168.232.129:2380'
advertise-client-urls: 'https://192.168.232.129:2379'
discovery:
discovery-fallback: 'proxy'
discovery-proxy:
discovery-srv:
initial-cluster: 'k8s-master01=https://192.168.232.128:2380,k8s-master02=https://192.168.232.129:2380,k8s-master03=https://192.168.232.130:2380'
initial-cluster-token: 'etcd-k8s-cluster'
initial-cluster-state: 'new'
strict-reconfig-check: false
enable-v2: true
enable-pprof: true
proxy: 'off'
proxy-failure-wait: 5000
proxy-refresh-interval: 30000
proxy-dial-timeout: 1000
proxy-write-timeout: 5000
proxy-read-timeout: 0
client-transport-security:
  cert-file: '/etc/kubernetes/pki/etcd/etcd.pem'
  key-file: '/etc/kubernetes/pki/etcd/etcd-key.pem'
  client-cert-auth: true
  trusted-ca-file: '/etc/kubernetes/pki/etcd/etcd-ca.pem'
  auto-tls: true
peer-transport-security:
  cert-file: '/etc/kubernetes/pki/etcd/etcd.pem'
  key-file: '/etc/kubernetes/pki/etcd/etcd-key.pem'
  peer-client-cert-auth: true
  trusted-ca-file: '/etc/kubernetes/pki/etcd/etcd-ca.pem'
  auto-tls: true
debug: false
log-package-levels:
log-outputs: [default]
force-new-cluster: false

Master03

vim /etc/etcd/etcd.config.yml

name: 'k8s-master03'
data-dir: /var/lib/etcd
wal-dir: /var/lib/etcd/wal
snapshot-count: 5000
heartbeat-interval: 100
election-timeout: 1000
quota-backend-bytes: 0
listen-peer-urls: 'https://192.168.232.130:2380'
listen-client-urls: 'https://192.168.232.130:2379,http://127.0.0.1:2379'
max-snapshots: 3
max-wals: 5
cors:
initial-advertise-peer-urls: 'https://192.168.232.130:2380'
advertise-client-urls: 'https://192.168.232.130:2379'
discovery:
discovery-fallback: 'proxy'
discovery-proxy:
discovery-srv:
initial-cluster: 'k8s-master01=https://192.168.232.128:2380,k8s-master02=https://192.168.232.129:2380,k8s-master03=https://192.168.232.130:2380'
initial-cluster-token: 'etcd-k8s-cluster'
initial-cluster-state: 'new'
strict-reconfig-check: false
enable-v2: true
enable-pprof: true
proxy: 'off'
proxy-failure-wait: 5000
proxy-refresh-interval: 30000
proxy-dial-timeout: 1000
proxy-write-timeout: 5000
proxy-read-timeout: 0
client-transport-security:
  cert-file: '/etc/kubernetes/pki/etcd/etcd.pem'
  key-file: '/etc/kubernetes/pki/etcd/etcd-key.pem'
  client-cert-auth: true
  trusted-ca-file: '/etc/kubernetes/pki/etcd/etcd-ca.pem'
  auto-tls: true
peer-transport-security:
  cert-file: '/etc/kubernetes/pki/etcd/etcd.pem'
  key-file: '/etc/kubernetes/pki/etcd/etcd-key.pem'
  peer-client-cert-auth: true
  trusted-ca-file: '/etc/kubernetes/pki/etcd/etcd-ca.pem'
  auto-tls: true
debug: false
log-package-levels:
log-outputs: [default]
force-new-cluster: false

所有Master節點創建etcd service並啟動（發送鍵輸入到所有的會話，取消node節點）

vim /usr/lib/systemd/system/etcd.service

[Unit]
Description=Etcd Service
Documentation=https://coreos.com/etcd/docs/latest/
After=network.target

[Service]
Type=notify
ExecStart=/usr/local/bin/etcd --config-file=/etc/etcd/etcd.config.yml
Restart=on-failure
RestartSec=10
LimitNOFILE=65536

[Install]
WantedBy=multi-user.target
Alias=etcd3.service

所有Master節點創建etcd的證書目錄

mkdir /etc/kubernetes/pki/etcd
ln -s /etc/etcd/ssl/* /etc/kubernetes/pki/etcd/
systemctl daemon-reload
systemctl enable --now etcd

查看etcd狀態

export ETCDCTL_API=3
etcdctl --endpoints="192.168.232.130:2379,192.168.232.129:2379,192.168.232.128:2379" --cacert=/etc/kubernetes/pki/etcd/etcd-ca.pem --cert=/etc/kubernetes/pki/etcd/etcd.pem --key=/etc/kubernetes/pki/etcd/etcd-key.pem  endpoint status --write-out=table

狀態

+----------------------+------------------+---------+---------+-----------+------------+-----------+------------+--------------------+--------+
|       ENDPOINT       |        ID        | VERSION | DB SIZE | IS LEADER | IS LEARNER | RAFT TERM | RAFT INDEX | RAFT APPLIED INDEX | ERRORS |
+----------------------+------------------+---------+---------+-----------+------------+-----------+------------+--------------------+--------+
| 192.168.232.130:2379 | 8fa642cec63e074b |  3.4.13 |   20 kB |     false |      false |         2 |          8 |                  8 |        |
| 192.168.232.129:2379 | b23932e50da8a0ea |  3.4.13 |   25 kB |     false |      false |         2 |          8 |                  8 |        |
| 192.168.232.128:2379 | d79600c132f4ccdb |  3.4.13 |   20 kB |      true |      false |         2 |          8 |                  8 |        |
+----------------------+------------------+---------+---------+-----------+------------+-----------+------------+--------------------+--------+

高可用配置

高可用配置（注意：如果不是高可用集群，haproxy和keepalived無需安裝）

如果在雲上安裝也無需執行此章節的步驟，可以直接使用雲上的lb，比如阿里雲slb，騰訊雲elb等

公有雲要用公有雲自帶的負載均衡，比如阿里雲的SLB，騰訊雲的ELB，用來替代haproxy和keepalived，因為公有雲大部分都是不支持keepalived的，另外如果用阿里雲的話，kubectl控制端不能放在master節點，推薦使用騰訊雲，因為阿里雲的slb有回環的問題，也就是slb代理的服務器不能反向訪問SLB，但是騰訊雲修復了這個問題。

Slb -> haproxy -> apiserver

所有Master節點安裝keepalived和haproxy

yum install keepalived haproxy -y

所有Master配置HAProxy，配置一樣（刪除默認配置 ggdG 回車）

vim /etc/haproxy/haproxy.cfg 

global
  maxconn  2000
  ulimit-n  16384
  log  127.0.0.1 local0 err
  stats timeout 30s

defaults
  log global
  mode  http
  option  httplog
  timeout connect 5000
  timeout client  50000
  timeout server  50000
  timeout http-request 15s
  timeout http-keep-alive 15s

frontend k8s-master
  bind 0.0.0.0:8443
  bind 127.0.0.1:8443
  mode tcp
  option tcplog
  tcp-request inspect-delay 5s
  default_backend k8s-master

backend k8s-master
  mode tcp
  option tcplog
  option tcp-check
  balance roundrobin
  default-server inter 10s downinter 5s rise 2 fall 2 slowstart 60s maxconn 250 maxqueue 256 weight 100
  server k8s-master01    192.168.232.128:6443  check
  server k8s-master02    192.168.232.129:6443  check
  server k8s-master03    192.168.232.130:6443  check

keepalived

所有Master節點配置KeepAlived，配置不一樣，注意區分

注意每個節點的IP和網卡（interface參數），查看網卡（ens33）並修改配置文件

ip a

如果公司有其他 keepalived ，注意 virtual_router_id 51 不能重復，它是一個廣播

Master01 keepalived（刪除默認配置 ggdG 回車）

vim /etc/keepalived/keepalived.conf

! Configuration File for keepalived
global_defs {
    router_id LVS_DEVEL
}
vrrp_script chk_apiserver {
    script "/etc/keepalived/check_apiserver.sh"
    interval 5 
    weight -5
    fall 2
    rise 1
}
vrrp_instance VI_1 {
    state MASTER
    interface ens33
    mcast_src_ip 192.168.232.128
    virtual_router_id 51
    priority 101
    nopreempt
    advert_int 2
    authentication {
        auth_type PASS
        auth_pass K8SHA_KA_AUTH
    }
    virtual_ipaddress {
        192.168.232.236
    }
    track_script {
      chk_apiserver 
} }

Master02 keepalived（刪除默認配置 ggdG 回車）

vim /etc/keepalived/keepalived.conf

! Configuration File for keepalived
global_defs {
    router_id LVS_DEVEL
}
vrrp_script chk_apiserver {
    script "/etc/keepalived/check_apiserver.sh"
    interval 5 
    weight -5
    fall 2
    rise 1
 
}
vrrp_instance VI_1 {
    state BACKUP
    interface ens33
    mcast_src_ip 192.168.232.129
    virtual_router_id 51
    priority 100
    nopreempt
    advert_int 2
    authentication {
        auth_type PASS
        auth_pass K8SHA_KA_AUTH
    }
    virtual_ipaddress {
        192.168.232.236
    }
    track_script {
      chk_apiserver 
} }

Master03 keepalived（刪除默認配置 ggdG 回車）

vim /etc/keepalived/keepalived.conf

! Configuration File for keepalived
global_defs {
    router_id LVS_DEVEL
}
vrrp_script chk_apiserver {
    script "/etc/keepalived/check_apiserver.sh"
    interval 5
    weight -5
    fall 2  
    rise 1
}
vrrp_instance VI_1 {
    state BACKUP
    interface ens33
    mcast_src_ip 192.168.232.130
    virtual_router_id 51
    priority 100
    nopreempt
    advert_int 2
    authentication {
        auth_type PASS
        auth_pass K8SHA_KA_AUTH
    }
    virtual_ipaddress {
        192.168.232.236
    }
    track_script {
      chk_apiserver 
} }

所有master節點健康檢查配置（發送鍵輸入到所有的會話，取消node節點）

vim /etc/keepalived/check_apiserver.sh

#!/bin/bash

err=0
for k in $(seq 1 3)
do
    check_code=$(pgrep haproxy)
    if [[ $check_code == "" ]]; then
        err=$(expr $err + 1)
        sleep 1
        continue
    else
        err=0
        break
    fi
done

if [[ $err != "0" ]]; then
    echo "systemctl stop keepalived"
    /usr/bin/systemctl stop keepalived
    exit 1
else
    exit 0
fi

chmod +x /etc/keepalived/check_apiserver.sh

所有master節點啟動haproxy和keepalived

systemctl daemon-reload
systemctl enable --now haproxy
systemctl enable --now keepalived

它會有一個選主的過程，然后綁定，這就是 VIP 的作用，它會在三個主節點之間選擇一個進行綁定，當這個節點出現問題的時候，VIP 會綁定到其他節點

查看 192.168.232.236 綁定情況

ip a

VIP測試

ping 192.168.232.236

重要：如果安裝了keepalived和haproxy，需要測試keepalived是否是正常的

telnet 192.168.232.236 8443

如果ping不通且telnet沒有出現 ]，則認為VIP不可以，不可在繼續往下執行，需要排查keepalived的問題，比如防火牆和selinux，haproxy和keepalived的狀態，監聽端口等

所有節點查看防火牆狀態必須為disable和inactive

systemctl status firewalld

所有節點查看selinux狀態，必須為disable：getenforce

master節點查看haproxy和keepalived狀態：

systemctl status keepalived haproxy

master節點查看監聽端口：

netstat -lntp

二進制K8s組件配置

Apiserver
ControllerManager
Scheduler

所有節點創建相關目錄（發送鍵輸入到所有的會話）

mkdir -p /etc/kubernetes/manifests/ /etc/systemd/system/kubelet.service.d /var/lib/kubelet /var/log/kubernetes

Apiserver

所有Master節點創建kube-apiserver service，# 注意，如果不是高可用集群，192.168.232.236改為master01的地址

Master01配置（取消發送鍵輸入到所有的會話）

注意k8s service網段為10.96.0.0/12，該網段不能和宿主機的網段、Pod網段的重復，請按需修改

vim /usr/lib/systemd/system/kube-apiserver.service

[Unit]
Description=Kubernetes API Server
Documentation=https://github.com/kubernetes/kubernetes
After=network.target

[Service]
ExecStart=/usr/local/bin/kube-apiserver \
      --v=2  \
      --logtostderr=true  \
      --allow-privileged=true  \
      --bind-address=0.0.0.0  \
      --secure-port=6443  \
      --insecure-port=0  \
      --advertise-address=192.168.232.128 \
      --service-cluster-ip-range=10.96.0.0/12  \
      --service-node-port-range=30000-32767  \
      --etcd-servers=https://192.168.232.128:2379,https://192.168.232.129:2379,https://192.168.232.130:2379 \
      --etcd-cafile=/etc/etcd/ssl/etcd-ca.pem  \
      --etcd-certfile=/etc/etcd/ssl/etcd.pem  \
      --etcd-keyfile=/etc/etcd/ssl/etcd-key.pem  \
      --client-ca-file=/etc/kubernetes/pki/ca.pem  \
      --tls-cert-file=/etc/kubernetes/pki/apiserver.pem  \
      --tls-private-key-file=/etc/kubernetes/pki/apiserver-key.pem  \
      --kubelet-client-certificate=/etc/kubernetes/pki/apiserver.pem  \
      --kubelet-client-key=/etc/kubernetes/pki/apiserver-key.pem  \
      --service-account-key-file=/etc/kubernetes/pki/sa.pub  \
      --service-account-signing-key-file=/etc/kubernetes/pki/sa.key  \
      --service-account-issuer=https://kubernetes.default.svc.cluster.local \
      --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname  \
      --enable-admission-plugins=NamespaceLifecycle,LimitRanger,ServiceAccount,DefaultStorageClass,DefaultTolerationSeconds,NodeRestriction,ResourceQuota  \
      --authorization-mode=Node,RBAC  \
      --enable-bootstrap-token-auth=true  \
      --requestheader-client-ca-file=/etc/kubernetes/pki/front-proxy-ca.pem  \
      --proxy-client-cert-file=/etc/kubernetes/pki/front-proxy-client.pem  \
      --proxy-client-key-file=/etc/kubernetes/pki/front-proxy-client-key.pem  \
      --requestheader-allowed-names=aggregator  \
      --requestheader-group-headers=X-Remote-Group  \
      --requestheader-extra-headers-prefix=X-Remote-Extra-  \
      --requestheader-username-headers=X-Remote-User
      # --token-auth-file=/etc/kubernetes/token.csv

Restart=on-failure
RestartSec=10s
LimitNOFILE=65535

[Install]
WantedBy=multi-user.target

Master02配置

注意k8s service網段為10.96.0.0/12，該網段不能和宿主機的網段、Pod網段的重復，請按需修改

vim /usr/lib/systemd/system/kube-apiserver.service

[Unit]
Description=Kubernetes API Server
Documentation=https://github.com/kubernetes/kubernetes
After=network.target

[Service]
ExecStart=/usr/local/bin/kube-apiserver \
      --v=2  \
      --logtostderr=true  \
      --allow-privileged=true  \
      --bind-address=0.0.0.0  \
      --secure-port=6443  \
      --insecure-port=0  \
      --advertise-address=192.168.232.129 \
      --service-cluster-ip-range=10.96.0.0/12  \
      --service-node-port-range=30000-32767  \
      --etcd-servers=https://192.168.232.128:2379,https://192.168.232.129:2379,https://192.168.232.130:2379 \
      --etcd-cafile=/etc/etcd/ssl/etcd-ca.pem  \
      --etcd-certfile=/etc/etcd/ssl/etcd.pem  \
      --etcd-keyfile=/etc/etcd/ssl/etcd-key.pem  \
      --client-ca-file=/etc/kubernetes/pki/ca.pem  \
      --tls-cert-file=/etc/kubernetes/pki/apiserver.pem  \
      --tls-private-key-file=/etc/kubernetes/pki/apiserver-key.pem  \
      --kubelet-client-certificate=/etc/kubernetes/pki/apiserver.pem  \
      --kubelet-client-key=/etc/kubernetes/pki/apiserver-key.pem  \
      --service-account-key-file=/etc/kubernetes/pki/sa.pub  \
      --service-account-signing-key-file=/etc/kubernetes/pki/sa.key  \
      --service-account-issuer=https://kubernetes.default.svc.cluster.local \
      --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname  \
      --enable-admission-plugins=NamespaceLifecycle,LimitRanger,ServiceAccount,DefaultStorageClass,DefaultTolerationSeconds,NodeRestriction,ResourceQuota  \
      --authorization-mode=Node,RBAC  \
      --enable-bootstrap-token-auth=true  \
      --requestheader-client-ca-file=/etc/kubernetes/pki/front-proxy-ca.pem  \
      --proxy-client-cert-file=/etc/kubernetes/pki/front-proxy-client.pem  \
      --proxy-client-key-file=/etc/kubernetes/pki/front-proxy-client-key.pem  \
      --requestheader-allowed-names=aggregator  \
      --requestheader-group-headers=X-Remote-Group  \
      --requestheader-extra-headers-prefix=X-Remote-Extra-  \
      --requestheader-username-headers=X-Remote-User
      # --token-auth-file=/etc/kubernetes/token.csv

Restart=on-failure
RestartSec=10s
LimitNOFILE=65535

[Install]
WantedBy=multi-user.target

Master03配置

注意k8s service網段為10.96.0.0/12，該網段不能和宿主機的網段、Pod網段的重復，請按需修改

vim /usr/lib/systemd/system/kube-apiserver.service

[Unit]
Description=Kubernetes API Server
Documentation=https://github.com/kubernetes/kubernetes
After=network.target

[Service]
ExecStart=/usr/local/bin/kube-apiserver \
      --v=2  \
      --logtostderr=true  \
      --allow-privileged=true  \
      --bind-address=0.0.0.0  \
      --secure-port=6443  \
      --insecure-port=0  \
      --advertise-address=192.168.232.130 \
      --service-cluster-ip-range=10.96.0.0/12  \
      --service-node-port-range=30000-32767  \
      --etcd-servers=https://192.168.232.128:2379,https://192.168.232.129:2379,https://192.168.232.130:2379 \
      --etcd-cafile=/etc/etcd/ssl/etcd-ca.pem  \
      --etcd-certfile=/etc/etcd/ssl/etcd.pem  \
      --etcd-keyfile=/etc/etcd/ssl/etcd-key.pem  \
      --client-ca-file=/etc/kubernetes/pki/ca.pem  \
      --tls-cert-file=/etc/kubernetes/pki/apiserver.pem  \
      --tls-private-key-file=/etc/kubernetes/pki/apiserver-key.pem  \
      --kubelet-client-certificate=/etc/kubernetes/pki/apiserver.pem  \
      --kubelet-client-key=/etc/kubernetes/pki/apiserver-key.pem  \
      --service-account-key-file=/etc/kubernetes/pki/sa.pub  \
      --service-account-signing-key-file=/etc/kubernetes/pki/sa.key  \
      --service-account-issuer=https://kubernetes.default.svc.cluster.local \
      --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname  \
      --enable-admission-plugins=NamespaceLifecycle,LimitRanger,ServiceAccount,DefaultStorageClass,DefaultTolerationSeconds,NodeRestriction,ResourceQuota  \
      --authorization-mode=Node,RBAC  \
      --enable-bootstrap-token-auth=true  \
      --requestheader-client-ca-file=/etc/kubernetes/pki/front-proxy-ca.pem  \
      --proxy-client-cert-file=/etc/kubernetes/pki/front-proxy-client.pem  \
      --proxy-client-key-file=/etc/kubernetes/pki/front-proxy-client-key.pem  \
      --requestheader-allowed-names=aggregator  \
      --requestheader-group-headers=X-Remote-Group  \
      --requestheader-extra-headers-prefix=X-Remote-Extra-  \
      --requestheader-username-headers=X-Remote-User
      # --token-auth-file=/etc/kubernetes/token.csv

Restart=on-failure
RestartSec=10s
LimitNOFILE=65535

[Install]
WantedBy=multi-user.target

所有Master節點開啟kube-apiserver（發送鍵輸入到所有的會話，取消node節點）

systemctl daemon-reload && systemctl enable --now kube-apiserver

檢測kube-server狀態

systemctl status kube-apiserver

ControllerManager

所有Master節點配置kube-controller-manager service

注意k8s Pod網段為172.16.0.0/12，該網段不能和宿主機的網段、k8s Service網段的重復，請按需修改

vim /usr/lib/systemd/system/kube-controller-manager.service

[Unit]
Description=Kubernetes Controller Manager
Documentation=https://github.com/kubernetes/kubernetes
After=network.target

[Service]
ExecStart=/usr/local/bin/kube-controller-manager \
      --v=2 \
      --logtostderr=true \
      --address=127.0.0.1 \
      --root-ca-file=/etc/kubernetes/pki/ca.pem \
      --cluster-signing-cert-file=/etc/kubernetes/pki/ca.pem \
      --cluster-signing-key-file=/etc/kubernetes/pki/ca-key.pem \
      --service-account-private-key-file=/etc/kubernetes/pki/sa.key \
      --kubeconfig=/etc/kubernetes/controller-manager.kubeconfig \
      --leader-elect=true \
      --use-service-account-credentials=true \
      --node-monitor-grace-period=40s \
      --node-monitor-period=5s \
      --pod-eviction-timeout=2m0s \
      --controllers=*,bootstrapsigner,tokencleaner \
      --allocate-node-cidrs=true \
      --cluster-cidr=172.16.0.0/12 \
      --requestheader-client-ca-file=/etc/kubernetes/pki/front-proxy-ca.pem \
      --node-cidr-mask-size=24
      
Restart=always
RestartSec=10s

[Install]
WantedBy=multi-user.target

所有Master節點啟動kube-controller-manager

systemctl daemon-reload

systemctl enable --now kube-controller-manager

查看啟動狀態

systemctl  status kube-controller-manager

Scheduler

所有Master節點配置kube-scheduler service

vim /usr/lib/systemd/system/kube-scheduler.service 

[Unit]
Description=Kubernetes Scheduler
Documentation=https://github.com/kubernetes/kubernetes
After=network.target

[Service]
ExecStart=/usr/local/bin/kube-scheduler \
      --v=2 \
      --logtostderr=true \
      --address=127.0.0.1 \
      --leader-elect=true \
      --kubeconfig=/etc/kubernetes/scheduler.kubeconfig

Restart=always
RestartSec=10s

[Install]
WantedBy=multi-user.target

啟動

systemctl daemon-reload

systemctl enable --now kube-scheduler

查看啟動狀態

systemctl  status kube-scheduler

二進制使用Bootstrapping自動頒發證書

它可以給 node 節點自動頒發證書，也就是給 keepalived 頒發證書

為什么這個證書不是手動管理？因為 k8s 主節點可能是固定的，創建好之后一直就是那幾台，但是 node 節點可能變化比較多，如果添加，刪除，故障維護節點的時候手動添加會比較麻煩，keepalived 證書和主機名是有綁定的，而我們的主機名又是不一樣的，所以需要有一種機制自動頒發 keepalived 發來的證書請求

在Master01創建bootstrap（取消發送鍵輸入到所有的會話）

注意，如果不是高可用集群，192.168.232.236:8443改為master01的地址，8443改為apiserver的端口，默認是6443

cd /root/k8s-ha-install/bootstrap
kubectl config set-cluster kubernetes     --certificate-authority=/etc/kubernetes/pki/ca.pem     --embed-certs=true     --server=https://192.168.232.236:8443     --kubeconfig=/etc/kubernetes/bootstrap-kubelet.kubeconfig
kubectl config set-credentials tls-bootstrap-token-user     --token=c8ad9c.2e4d610cf3e7426e --kubeconfig=/etc/kubernetes/bootstrap-kubelet.kubeconfig
kubectl config set-context tls-bootstrap-token-user@kubernetes     --cluster=kubernetes     --user=tls-bootstrap-token-user     --kubeconfig=/etc/kubernetes/bootstrap-kubelet.kubeconfig
kubectl config use-context tls-bootstrap-token-user@kubernetes     --kubeconfig=/etc/kubernetes/bootstrap-kubelet.kubeconfig

bootstrap-kubelet.kubeconfig 是一個 keepalived 用來向 apiserver 申請證書的文件

注意：如果要修改bootstrap.secret.yaml的token-id和token-secret，需要保證 c8ad9c 字符串一致的，並且位數是一樣的。還要保證上個命令的黃色字體：c8ad9c.2e4d610cf3e7426e與你修改的字符串要一致

cat bootstrap.secret.yaml

apiVersion: v1
kind: Secret
metadata:
  name: bootstrap-token-c8ad9c
  namespace: kube-system
type: bootstrap.kubernetes.io/token
stringData:
  description: "The default bootstrap token generated by 'kubelet '."
  token-id: c8ad9c
  token-secret: 2e4d610cf3e7426e
  usage-bootstrap-authentication: "true"
  usage-bootstrap-signing: "true"
  auth-extra-groups:  system:bootstrappers:default-node-token,system:bootstrappers:worker,system:bootstrappers:ingress

創建配置文件，缺乏此文件無法執行 kubectl get node（The connection to the server localhost:8080 was refused），需要將證書復制過來

mkdir -p /root/.kube ; cp /etc/kubernetes/admin.kubeconfig /root/.kube/config

kubectl 命令只需要一個節點擁有就可以，這是控制節點，不可以讓每個節點都擁有，這樣非常危險，可以把他放到集群之外的任何一個節點都可以，並不一定是我們的 k8s 節點，任何一台服務器與 k8s 相通即可，需要把這個文件復制過去，就可以訪問到我們這個集群

創建 bootstrap

kubectl create -f bootstrap.secret.yaml

二進制Node節點及Calico配置

二進制Node節點

復制證書
Kubelet配置
kube-proxy配置

復制證書

node節點使用自動頒發證書的形式配置

Master01節點復制證書至Node節點

cd /etc/kubernetes/

for NODE in k8s-master02 k8s-master03 k8s-node01 k8s-node02; do
     ssh $NODE mkdir -p /etc/kubernetes/pki /etc/etcd/ssl /etc/etcd/ssl
     for FILE in etcd-ca.pem etcd.pem etcd-key.pem; do
       scp /etc/etcd/ssl/$FILE $NODE:/etc/etcd/ssl/
     done
     for FILE in pki/ca.pem pki/ca-key.pem pki/front-proxy-ca.pem bootstrap-kubelet.kubeconfig; do
       scp /etc/kubernetes/$FILE $NODE:/etc/kubernetes/${FILE}
 done
 done

Kubelet配置

所有節點創建相關目錄（發送鍵輸入到所有的會話）

mkdir -p /var/lib/kubelet /var/log/kubernetes /etc/systemd/system/kubelet.service.d /etc/kubernetes/manifests/

所有節點配置kubelet service

vim  /usr/lib/systemd/system/kubelet.service
# 添加以下內容
[Unit]
Description=Kubernetes Kubelet
Documentation=https://github.com/kubernetes/kubernetes
After=docker.service
Requires=docker.service

[Service]
ExecStart=/usr/local/bin/kubelet

Restart=always
StartLimitInterval=0
RestartSec=10

[Install]
WantedBy=multi-user.target

所有節點配置kubelet service的配置文件

vim /etc/systemd/system/kubelet.service.d/10-kubelet.conf
# 添加以下內容
[Service]
Environment="KUBELET_KUBECONFIG_ARGS=--bootstrap-kubeconfig=/etc/kubernetes/bootstrap-kubelet.kubeconfig --kubeconfig=/etc/kubernetes/kubelet.kubeconfig"
Environment="KUBELET_SYSTEM_ARGS=--network-plugin=cni --cni-conf-dir=/etc/cni/net.d --cni-bin-dir=/opt/cni/bin"
Environment="KUBELET_CONFIG_ARGS=--config=/etc/kubernetes/kubelet-conf.yml --pod-infra-container-image=registry.cn-hangzhou.aliyuncs.com/google_containers/pause-amd64:3.2"
Environment="KUBELET_EXTRA_ARGS=--node-labels=node.kubernetes.io/node='' "
ExecStart=
ExecStart=/usr/local/bin/kubelet $KUBELET_KUBECONFIG_ARGS $KUBELET_CONFIG_ARGS $KUBELET_SYSTEM_ARGS $KUBELET_EXTRA_ARGS

創建kubelet的配置文件

注意：如果更改了k8s的service網段，需要更改kubelet-conf.yml 的clusterDNS:配置，改成k8s Service網段的第十個地址，比如10.96.0.10

vim /etc/kubernetes/kubelet-conf.yml
# 添加以下內容
apiVersion: kubelet.config.k8s.io/v1beta1
kind: KubeletConfiguration
address: 0.0.0.0
port: 10250
readOnlyPort: 10255
authentication:
  anonymous:
    enabled: false
  webhook:
    cacheTTL: 2m0s
    enabled: true
  x509:
    clientCAFile: /etc/kubernetes/pki/ca.pem
authorization:
  mode: Webhook
  webhook:
    cacheAuthorizedTTL: 5m0s
    cacheUnauthorizedTTL: 30s
cgroupDriver: systemd
cgroupsPerQOS: true
clusterDNS:
- 10.96.0.10
clusterDomain: cluster.local
containerLogMaxFiles: 5
containerLogMaxSize: 10Mi
contentType: application/vnd.kubernetes.protobuf
cpuCFSQuota: true
cpuManagerPolicy: none
cpuManagerReconcilePeriod: 10s
enableControllerAttachDetach: true
enableDebuggingHandlers: true
enforceNodeAllocatable:
- pods
eventBurst: 10
eventRecordQPS: 5
evictionHard:
  imagefs.available: 15%
  memory.available: 100Mi
  nodefs.available: 10%
  nodefs.inodesFree: 5%
evictionPressureTransitionPeriod: 5m0s
failSwapOn: true
fileCheckFrequency: 20s
hairpinMode: promiscuous-bridge
healthzBindAddress: 127.0.0.1
healthzPort: 10248
httpCheckFrequency: 20s
imageGCHighThresholdPercent: 85
imageGCLowThresholdPercent: 80
imageMinimumGCAge: 2m0s
iptablesDropBit: 15
iptablesMasqueradeBit: 14
kubeAPIBurst: 10
kubeAPIQPS: 5
makeIPTablesUtilChains: true
maxOpenFiles: 1000000
maxPods: 110
nodeStatusUpdateFrequency: 10s
oomScoreAdj: -999
podPidsLimit: -1
registryBurst: 10
registryPullQPS: 5
resolvConf: /etc/resolv.conf
rotateCertificates: true
runtimeRequestTimeout: 2m0s
serializeImagePulls: true
staticPodPath: /etc/kubernetes/manifests
streamingConnectionIdleTimeout: 4h0m0s
syncFrequency: 1m0s
volumeStatsAggPeriod: 1m0s

啟動所有節點kubelet

systemctl daemon-reload
systemctl enable --now kubelet

查看系統日志

tail -f /var/log/messages

顯示只有如下信息為正常，因為Calico還沒安裝

Unable to update cni config" err="no networks found in /etc/cni/net.d

查看集群狀態

kubectl get node

集群狀態NotReady，因為Calico還沒安裝

NAME           STATUS     ROLES    AGE   VERSION
k8s-master01   NotReady   <none>   6s    v1.20.9
k8s-master02   NotReady   <none>   6s    v1.20.9
k8s-master03   NotReady   <none>   6s    v1.20.9
k8s-node01     NotReady   <none>   6s    v1.20.9
k8s-node02     NotReady   <none>   6s    v1.20.9

kube-proxy配置

注意，如果不是高可用集群，192.168.232.236:8443改為master01的地址，8443改為apiserver的端口，默認是6443

在Master01執行（取消發送鍵輸入到所有的會話）

cd /root/k8s-ha-install
kubectl -n kube-system create serviceaccount kube-proxy
kubectl create clusterrolebinding system:kube-proxy         --clusterrole system:node-proxier         --serviceaccount kube-system:kube-proxy
SECRET=$(kubectl -n kube-system get sa/kube-proxy \
    --output=jsonpath='{.secrets[0].name}')
JWT_TOKEN=$(kubectl -n kube-system get secret/$SECRET \
--output=jsonpath='{.data.token}' | base64 -d)
PKI_DIR=/etc/kubernetes/pki
K8S_DIR=/etc/kubernetes
kubectl config set-cluster kubernetes     --certificate-authority=/etc/kubernetes/pki/ca.pem     --embed-certs=true     --server=https://192.168.232.236:8443     --kubeconfig=${K8S_DIR}/kube-proxy.kubeconfig
kubectl config set-credentials kubernetes     --token=${JWT_TOKEN}     --kubeconfig=/etc/kubernetes/kube-proxy.kubeconfig
kubectl config set-context kubernetes     --cluster=kubernetes     --user=kubernetes     --kubeconfig=/etc/kubernetes/kube-proxy.kubeconfig
kubectl config use-context kubernetes     --kubeconfig=/etc/kubernetes/kube-proxy.kubeconfig

如果更改了集群Pod的網段，需要更改kube-proxy/kube-proxy.conf的clusterCIDR: 172.16.0.0/12參數為pod的網段。

[root@k8s-master01 k8s-ha-install]# vim kube-proxy/kube-proxy.conf 
# 修改以下內容
clusterCIDR: 172.16.0.0/12

在master01將kube-proxy的systemd Service文件發送到其他節點

for NODE in k8s-master01 k8s-master02 k8s-master03; do
     scp ${K8S_DIR}/kube-proxy.kubeconfig $NODE:/etc/kubernetes/kube-proxy.kubeconfig
     scp kube-proxy/kube-proxy.conf $NODE:/etc/kubernetes/kube-proxy.conf
     scp kube-proxy/kube-proxy.service $NODE:/usr/lib/systemd/system/kube-proxy.service
 done

for NODE in k8s-node01 k8s-node02; do
     scp /etc/kubernetes/kube-proxy.kubeconfig $NODE:/etc/kubernetes/kube-proxy.kubeconfig
     scp kube-proxy/kube-proxy.conf $NODE:/etc/kubernetes/kube-proxy.conf
     scp kube-proxy/kube-proxy.service $NODE:/usr/lib/systemd/system/kube-proxy.service
 done

所有節點啟動kube-proxy（發送鍵輸入到所有的會話）

systemctl daemon-reload

systemctl enable --now kube-proxy

查看狀態

systemctl status kube-proxy

如果出現如下報錯需要調整一下配置文件

[root@k8s-master01 k8s-ha-install]# systemctl status kube-proxy
● kube-proxy.service - Kubernetes Kube Proxy
   Loaded: error (Reason: Invalid argument)
   Active: inactive (dead)
     Docs: https://github.com/kubernetes/kubernetes

Aug 05 15:00:02 localhost.localdomain systemd[1]: kube-proxy.service lacks both ExecStart= and ExecStop= setting. Refusing.
Aug 05 15:00:02 localhost.localdomain systemd[1]: Cannot add dependency job for unit kube-proxy.service, ignoring: Unit is not loaded properly: Invalid argument.
Aug 05 15:23:18 k8s-master01 systemd[1]: [/usr/lib/systemd/system/kube-proxy.service:7] Trailing garbage, ignoring.
Aug 05 15:23:18 k8s-master01 systemd[1]: [/usr/lib/systemd/system/kube-proxy.service:8] Unknown lvalue '--config' in section 'Service'
Aug 05 15:23:18 k8s-master01 systemd[1]: [/usr/lib/systemd/system/kube-proxy.service:9] Unknown lvalue '--v' in section 'Service'
Aug 05 15:23:18 k8s-master01 systemd[1]: kube-proxy.service lacks both ExecStart= and ExecStop= setting. Refusing.
Aug 05 15:23:26 k8s-master01 systemd[1]: [/usr/lib/systemd/system/kube-proxy.service:7] Trailing garbage, ignoring.
Aug 05 15:23:26 k8s-master01 systemd[1]: [/usr/lib/systemd/system/kube-proxy.service:8] Unknown lvalue '--config' in section 'Service'
Aug 05 15:23:26 k8s-master01 systemd[1]: [/usr/lib/systemd/system/kube-proxy.service:9] Unknown lvalue '--v' in section 'Service'
Aug 05 15:23:26 k8s-master01 systemd[1]: kube-proxy.service lacks both ExecStart= and ExecStop= setting. Refusing.

刪除kube-proxy

[root@k8s-master01 k8s-ha-install]# kubectl -n kube-system delete serviceaccount kube-proxy
serviceaccount "kube-proxy" deleted

修改配置

[root@k8s-master01 k8s-ha-install]# vim kube-proxy/kube-proxy.service
# 取消換行
ExecStart=/usr/local/bin/kube-proxy --config=/etc/kubernetes/kube-proxy.conf --v=2

再次執行創建

cd /root/k8s-ha-install
kubectl -n kube-system create serviceaccount kube-proxy
kubectl create clusterrolebinding system:kube-proxy         --clusterrole system:node-proxier         --serviceaccount kube-system:kube-proxy
SECRET=$(kubectl -n kube-system get sa/kube-proxy \
    --output=jsonpath='{.secrets[0].name}')
JWT_TOKEN=$(kubectl -n kube-system get secret/$SECRET \
--output=jsonpath='{.data.token}' | base64 -d)
PKI_DIR=/etc/kubernetes/pki
K8S_DIR=/etc/kubernetes
kubectl config set-cluster kubernetes     --certificate-authority=/etc/kubernetes/pki/ca.pem     --embed-certs=true     --server=https://192.168.232.236:8443     --kubeconfig=${K8S_DIR}/kube-proxy.kubeconfig
kubectl config set-credentials kubernetes     --token=${JWT_TOKEN}     --kubeconfig=/etc/kubernetes/kube-proxy.kubeconfig
kubectl config set-context kubernetes     --cluster=kubernetes     --user=kubernetes     --kubeconfig=/etc/kubernetes/kube-proxy.kubeconfig
kubectl config use-context kubernetes     --kubeconfig=/etc/kubernetes/kube-proxy.kubeconfig

修改配置

[root@k8s-master01 k8s-ha-install]# vim /usr/lib/systemd/system/kube-proxy.service
# 取消換行
ExecStart=/usr/local/bin/kube-proxy --config=/etc/kubernetes/kube-proxy.conf --v=2

如果更改了集群Pod的網段，需要更改kube-proxy/kube-proxy.conf的clusterCIDR: 172.16.0.0/12參數為pod的網段。

[root@k8s-master01 k8s-ha-install]# vim kube-proxy/kube-proxy.conf 
# 修改以下內容
clusterCIDR: 172.16.0.0/12

在master01將kube-proxy的systemd Service文件發送到其他節點

for NODE in k8s-master01 k8s-master02 k8s-master03; do
     scp ${K8S_DIR}/kube-proxy.kubeconfig $NODE:/etc/kubernetes/kube-proxy.kubeconfig
     scp kube-proxy/kube-proxy.conf $NODE:/etc/kubernetes/kube-proxy.conf
     scp kube-proxy/kube-proxy.service $NODE:/usr/lib/systemd/system/kube-proxy.service
 done

for NODE in k8s-node01 k8s-node02; do
     scp /etc/kubernetes/kube-proxy.kubeconfig $NODE:/etc/kubernetes/kube-proxy.kubeconfig
     scp kube-proxy/kube-proxy.conf $NODE:/etc/kubernetes/kube-proxy.conf
     scp kube-proxy/kube-proxy.service $NODE:/usr/lib/systemd/system/kube-proxy.service
 done

所有節點啟動kube-proxy（發送鍵輸入到所有的會話）

systemctl daemon-reload

systemctl enable --now kube-proxy

查看日志

tail -f /var/log/messages

查看狀態

systemctl status kube-proxy

啟動成功

[root@k8s-master01 k8s-ha-install]# systemctl status kube-proxy
● kube-proxy.service - Kubernetes Kube Proxy
   Loaded: loaded (/usr/lib/systemd/system/kube-proxy.service; enabled; vendor preset: disabled)
   Active: active (running) since Thu 2021-08-05 15:42:25 CST; 7s ago
     Docs: https://github.com/kubernetes/kubernetes
 Main PID: 11767 (kube-proxy)
    Tasks: 6
   Memory: 54.2M
   CGroup: /system.slice/kube-proxy.service
           └─11767 /usr/local/bin/kube-proxy --config=/etc/kubernetes/kube-proxy.conf --v=2

Aug 05 15:42:27 k8s-master01 kube-proxy[11767]: I0805 15:42:27.735111   11767 shared_informer.go:240] Waiting for caches to sync for service config
Aug 05 15:42:27 k8s-master01 kube-proxy[11767]: I0805 15:42:27.735146   11767 config.go:224] Starting endpoint slice config controller
Aug 05 15:42:27 k8s-master01 kube-proxy[11767]: I0805 15:42:27.735151   11767 shared_informer.go:240] Waiting for caches to sync for endpoint slice config
Aug 05 15:42:27 k8s-master01 kube-proxy[11767]: I0805 15:42:27.735367   11767 reflector.go:219] Starting reflector *v1.Service (15m0s) from k8s.io/client-go/informers/factory.go:134
Aug 05 15:42:27 k8s-master01 kube-proxy[11767]: I0805 15:42:27.735813   11767 reflector.go:219] Starting reflector *v1beta1.EndpointSlice (15m0s) from k8s.io/client-go/informers/factory.go:134
Aug 05 15:42:27 k8s-master01 kube-proxy[11767]: I0805 15:42:27.738920   11767 service.go:275] Service default/kubernetes updated: 1 ports
Aug 05 15:42:27 k8s-master01 kube-proxy[11767]: I0805 15:42:27.837140   11767 shared_informer.go:247] Caches are synced for endpoint slice config
Aug 05 15:42:27 k8s-master01 kube-proxy[11767]: I0805 15:42:27.837210   11767 proxier.go:1036] Not syncing ipvs rules until Services and Endpoints have been received from master
Aug 05 15:42:27 k8s-master01 kube-proxy[11767]: I0805 15:42:27.837227   11767 shared_informer.go:247] Caches are synced for service config
Aug 05 15:42:27 k8s-master01 kube-proxy[11767]: I0805 15:42:27.837470   11767 service.go:390] Adding new service port "default/kubernetes:https" at 10.96.0.1:443/TCP

Calico配置

在master01執行（取消發送鍵輸入到所有的會話）

cd /root/k8s-ha-install/calico/

# 修改calico-etcd.yaml的以下位置
sed -i 's#etcd_endpoints: "http://<ETCD_IP>:<ETCD_PORT>"#etcd_endpoints: "https://192.168.232.128:2379,https://192.168.232.129:2379,https://192.168.232.130:2379"#g' calico-etcd.yaml

ETCD_CA=`cat /etc/kubernetes/pki/etcd/etcd-ca.pem | base64 | tr -d '\n'`
ETCD_CERT=`cat /etc/kubernetes/pki/etcd/etcd.pem | base64 | tr -d '\n'`
ETCD_KEY=`cat /etc/kubernetes/pki/etcd/etcd-key.pem | base64 | tr -d '\n'`

sed -i "s@# etcd-key: null@etcd-key: ${ETCD_KEY}@g; s@# etcd-cert: null@etcd-cert: ${ETCD_CERT}@g; s@# etcd-ca: null@etcd-ca: ${ETCD_CA}@g" calico-etcd.yaml

sed -i 's#etcd_ca: ""#etcd_ca: "/calico-secrets/etcd-ca"#g; s#etcd_cert: ""#etcd_cert: "/calico-secrets/etcd-cert"#g; s#etcd_key: "" #etcd_key: "/calico-secrets/etcd-key" #g' calico-etcd.yaml

# 更改此處為自己的pod網段
POD_SUBNET="172.16.0.0/12"

# 注意下面的這個步驟是把calico-etcd.yaml文件里面的CALICO_IPV4POOL_CIDR下的網段改成自己的Pod網段，也就是把192.168.x.x/16改成自己的集群網段，並打開注釋：
sed -i 's@# - name: CALICO_IPV4POOL_CIDR@- name: CALICO_IPV4POOL_CIDR@g; s@#   value: "192.168.0.0/16"@  value: '"${POD_SUBNET}"'@g' calico-etcd.yaml

kubectl apply -f calico-etcd.yaml

查看容器狀態

kubectl  get po -n kube-system

容器狀態

NAME                                      READY   STATUS    RESTARTS      AGE
calico-kube-controllers-cdd5755b9-4fzg9   1/1     Running   0             113s
calico-node-8xg62                         1/1     Running   0             113s
calico-node-dczxz                         1/1     Running   0             113s
calico-node-gn8ws                         1/1     Running   0             113s
calico-node-qmwkd                         1/1     Running   0             113s
calico-node-zfw8n                         1/1     Running   2 (78s ago)   113s

如果容器狀態異常可以使用kubectl describe 或者logs查看容器的日志

課程鏈接（私信領取福利）

http://www.kubeasy.com/

本作品采用知識共享署名-非商業性使用-相同方式共享 4.0 國際許可協議進行許可。

歡迎轉載、使用、重新發布，但務必保留文章署名鄭子銘（包含鏈接： http://www.cnblogs.com/MingsonZheng/ ），不得用於商業目的，基於本文修改后的作品務必以相同的許可發布。

免責聲明！

本站轉載的文章為個人學習借鑒使用，本站對版權不負任何法律責任。如果侵犯了您的隱私權益，請聯系本站郵箱yoyou2525@163.com刪除。

猜您在找 Kubernetes全棧架構師（二進制高可用安裝k8s集群擴展篇）--學習筆記 Kubernetes全棧架構師（Kubeadm高可用安裝k8s集群）--學習筆記 K8S學習筆記之二進制部署Kubernetes v1.13.4 高可用集群二進制安裝部署k8s高可用集群V1.20 二進制搭建kubernetes多master集群【三、配置k8s master及高可用】二進制部署k8s 1.18.14（高可用） k8s二進制部署(高可用) 5.基於二進制部署kubernetes(k8s)集群 kubernetes實戰(三十)：CentOS 8 二進制高可用安裝 k8s 1.17.x k8s集群安裝學習筆記十——Kubernetes高可用安裝部署(3個master節點)

Kubernetes全棧架構師（二進制高可用安裝k8s集群部署篇）--學習筆記

目錄

二進制高可用基本配置

二進制系統和內核升級

二進制基本組件安裝

Docker安裝

K8s及etcd安裝

二進制生成證書詳解

etcd證書

k8s組件證書

二進制高可用及etcd配置

Etcd配置

高可用配置

二進制K8s組件配置

Apiserver

ControllerManager

Scheduler

二進制使用Bootstrapping自動頒發證書

二進制Node節點及Calico配置

二進制Node節點

復制證書

Kubelet配置

kube-proxy配置

Calico配置

課程鏈接（私信領取福利）

免責聲明！