基於mac地址划分VLAN

網絡拓撲圖：

 

SW2配置命令：將服務器划分至相應的vlan

<huawei>system-view        #進入系統視圖
[huawei]sysname SW2        #命名為SW2
[SW2]vlan batch 10 20        #創建vlan 10 20
[SW2]interface GigabitEthernet 0/0/2        #進入G0/0/2
[SW2-GigabitEthernet0/0/2]port link-type access        #配置接口類型
[SW2-GigabitEthernet0/0/2]port default vlan 10        #划分至vlan 10

[SW2-GigabitEthernet0/0/2]inter gig0/0/3        #進入G0/0/3
[SW2-GigabitEthernet0/0/3]port link-type access        #配置接口類型
[SW2-GigabitEthernet0/0/3]port default vlan 20        #划分至vlan 20

[SW2-GigabitEthernet0/0/3]inter gig0/0/1        #進入G0/0/1
[SW2-GigabitEthernet0/0/1]port link-type trunk        #配置trunk
[SW2-GigabitEthernet0/0/1]port trunk allow-pass vlan 10 20        #允許vlan 10 20數據通過

 

SW1配置：

<Huawei>system-view         #進入系統視圖
[Huawei]vlan batch 10 20        #創建vlan 10 20
[Huawei]interface GigabitEthernet 0/0/1        #進入G0/0/1
[Huawei-GigabitEthernet0/0/1]port link-type trunk        #配置trunk
[Huawei-GigabitEthernet0/0/1]port trunk allow-pass vlan 10 20        #允許vlan 10 20數據包通過
[Huawei-GigabitEthernet0/0/1]quit        #退出

[Huawei]vlan 10 #進入vlan 10 [Huawei-vlan10]mac-vlan mac-address 5489-98EB-7EE2 #將這個mac地址划分vlan 10 [Huawei-vlan10]mac-vlan mac-address 5489-989A-6EEC #將這個mac地址划分vlan 10 [Huawei-vlan10]vlan 20 #進入vlan 20 [Huawei-vlan20]mac-vlan mac-address 5489-9890-105A #將這個mac地址划分vlan 20 [Huawei]interface GigabitEthernet 0/0/2 #進入G0/0/2 [Huawei-GigabitEthernet0/0/2]port hybrid untagged vlan 10 20 #配置混合接口 [Huawei-GigabitEthernet0/0/2]mac-vlan enable #開啟基於mac地址划分vlan

 

查看mac地址：dis mac-vlan mac-address all