WebRTC之完整搭建Jitsi Meet指南

前言

Jitsi是個優秀的WebRTC流媒體服務器，使用Java語言做開發，可以讓很多Java人員也能進行流媒體開發，但是奈何國內的教程太少，官方文檔更新太快，導致很多想用他的人卻望而卻步。

在寫這篇文章之前，在搜索引擎上進行了搜索，發現沒有一篇文章完整的把Jitsi Meet搭建起來並且能夠多人正常音視頻通話的文章

不管是論壇和QQ群經常有人問Jitsi搭建的問題，在此我就分享一篇我自己的搭建經驗

注意!!!本篇使用的官方教程Manual installation(手動安裝),為什么使用手動安裝不是快速安裝，因為我后期會在上面自定義一些功能。

jitsi官方更新的比較頻繁，如果你按照本篇文章安裝出現了問題，可以進入QQ群進行提問

准備工作

建議全篇的Linxu命令都使用root用戶去操作，如果不是使用root，請都加sudo

• 一台Ubuntu18.04的服務器，擁有公網ip，最好是國外服務器，國內服務器下載依賴很慢。
• 一個域名，提前把域名解析到服務器的公網ip
• 安全組設置入網規則 tcp80,443,4443,udp:10000-20000
• 關閉防火牆 Ubuntu上檢查防火牆狀態

sudo ufw status 

出現以下說明防火牆關閉

Status: inactive 

如果出現不是上面的內容，執行命令關閉防火牆

sudo ufw disable 

Jitsi Network description

安裝prosody

sudo apt-get update sudo apt-get install prosody 

配置 prosody

1.成功安裝prosody后，在/etc/prosody/下會有prosody的目錄文件,注意在prosody 0.11.5版本 /etc/prosody下沒有conf.d文件，所以推薦安裝prosody使用apt-get install 而不要使用官方的提供最新的源 2.創建配置文件，這里推薦使用官方提供的一個demo配置文件上去改，而不使用官方教程推薦的自己創建文件

 cp /etc/prosody/ /etc/prosody/conf.avail/you.example.org.cfg.lua
 vim /etc/prosody/conf.avail/you.example.org.cfg.lua
 // 添加內容 admins = {"[e-mail]" } daemonize = true cross_domain_bosh = true; component_ports = { 5347 } // 分段復制 VirtualHost "you.example.org" -- enabled = false -- Remove this line to enable this host authentication = "anonymous"; -- Assign this host a certificate for TLS, otherwise it would use the one -- set in the global section (if any). -- Note that old-style SSL on port 5223 only supports one certificate, and will always -- use the global one. ssl = { key = "/var/lib/prosody/you.example.org.key"; certificate = "/var/lib/prosody/you.example.org.crt"; } modules_enabled = { "bosh"; "pubsub"; } c2s_require_encryption = false // 分段復制 VirtualHost "auth.you.example.org" ssl = { key = "/var/lib/prosody/auth.you.example.org.key"; certificate = "/var/lib/prosody/auth.you.example.org.crt"; } authentication = "internal_plain" Component "conference.you.example.org" "muc" Component "jitsi-videobridge.you.example.org.com" component_secret = "IfGaish6" --YOURSECRET1 Component "focus.you.example.org" component_secret = "kod93jd" --YOURSECRET2 

輸入:wq! 保存 完整版如下

-- Prosody XMPP Server Configuration -- -- Information on configuring Prosody can be found on our -- website at http://prosody.im/doc/configure -- -- Tip: You can check that the syntax of this file is correct -- when you have finished by running: prosodyctl check config -- If there are any errors, it will let you know what and where -- they are, otherwise it will keep quiet. -- -- Good luck, and happy Jabbering! ---------- Server-wide settings ---------- -- Settings in this section apply to the whole server and are the default settings -- for any virtual hosts -- This is a (by default, empty) list of accounts that are admins -- for the server. Note that you must create the accounts separately -- (see http://prosody.im/doc/creating_accounts for info) -- Example: admins = { "[e-mail]", "[e-mail]" } admins = {"[e-mail]" } daemonize = true cross_domain_bosh = true; component_ports = { 5347 } --component_interface = "192.168.0.10" -- plugin_paths = {"/usr/share/jitsi-meet/prosody-plugins";"/opt/prosody-modules";} -- Enable use of libevent for better performance under high load -- For more information see: http://prosody.im/doc/libevent --use_libevent = true -- This is the list of modules Prosody will load on startup. -- It looks for mod_modulename.lua in the plugins folder, so make sure that exists too. -- Documentation on modules can be found at: http://prosody.im/doc/modules -- modules_enabled = { -- Generally required -- "roster"; -- Allow users to have a roster. Recommended ;) -- "saslauth"; -- Authentication for clients and servers. Recommended if you want to log in. -- "tls"; -- Add support for secure TLS on c2s/s2s connections -- "dialback"; -- s2s dialback support -- "disco"; -- Service discovery -- "posix"; -- POSIX functionality, sends server to background, enables syslog, etc. -- Not essential, but recommended -- "private"; -- Private XML storage (for room bookmarks, etc.) -- "vcard"; -- Allow users to set vCards -- These are commented by default as they have a performance impact --"privacy"; -- Support privacy lists -- "compression"; -- Stream compression (requires the lua-zlib package installed) -- Nice to have -- "version"; -- Replies to server version requests -- "uptime"; -- Report how long server has been running -- "time"; -- Let others know the time here on this server -- "ping"; -- Replies to XMPP pings with pongs -- "pep"; -- Enables users to publish their mood, activity, playing music and more -- "register"; -- Allow users to register on this server using a client and change passwords -- Admin interfaces -- "admin_adhoc"; -- Allows administration via an XMPP client that supports ad-hoc commands --"admin_telnet"; -- Opens telnet console interface on localhost port 5582 -- HTTP modules -- "bosh"; -- Enable BOSH clients, aka "Jabber over HTTP" --"http_files"; -- Serve static files from a directory over HTTP -- Other specific functionality --"groups"; -- Shared roster support --"announce"; -- Send announcement to all online users --"welcome"; -- Welcome users who register accounts --"watchregistrations"; -- Alert admins of registrations --"motd"; -- Send a message to users when they log in --"legacyauth"; -- Legacy authentication. Only used by some old clients and bots. -- jitsi -- "smacks"; -- "carbons"; -- "mam"; -- "lastactivity"; -- "offline"; -- "pubsub"; -- "adhoc"; -- "websocket"; -- "http_altconnect"; -- "muc_size"; --} -- These modules are auto-loaded, but should you want -- to disable them then uncomment them here: modules_disabled = { -- "offline"; -- Store offline messages -- "c2s"; -- Handle client connections -- "s2s"; -- Handle server-to-server connections } -- Disable account creation by default, for security -- For more information see http://prosody.im/doc/creating_accounts allow_registration = false -- These are the SSL/TLS-related settings. If you don't want -- to use SSL/TLS, you may comment or remove this --ssl = { -- key = "/etc/prosody/certs/localhost.key"; -- certificate = "/etc/prosody/certs/localhost.crt"; --} -- Force clients to use encrypted connections? This option will -- prevent clients from authenticating unless they are using encryption. -- c2s_require_encryption = true -- Force certificate authentication for server-to-server connections? -- This provides ideal security, but requires servers you communicate -- with to support encryption AND present valid, trusted certificates. -- NOTE: Your version of LuaSec must support certificate verification! -- For more information see http://prosody.im/doc/s2s#security -- s2s_secure_auth = false -- Many servers don't support encryption or have invalid or self-signed -- certificates. You can list domains here that will not be required to -- authenticate using certificates. They will be authenticated using DNS. --s2s_insecure_domains = { "gmail.com" } -- Even if you leave s2s_secure_auth disabled, you can still require valid -- certificates for some domains by specifying a list here. --s2s_secure_domains = { "jabber.org" } -- Required for init scripts and prosodyctl pidfile = "/var/run/prosody/prosody.pid" -- Select the authentication backend to use. The 'internal' providers -- use Prosody's configured data storage to store the authentication data. -- To allow Prosody to offer secure authentication mechanisms to clients, the -- default provider stores passwords in plaintext. If you do not trust your -- server please see http://prosody.im/doc/modules/mod_auth_internal_hashed -- for information about using the hashed backend. -- authentication = "internal_plain" authentication = "internal_hashed" -- Select the storage backend to use. By default Prosody uses flat files -- in its configured data directory, but it also supports more backends -- through modules. An "sql" backend is included by default, but requires -- additional dependencies. See http://prosody.im/doc/storage for more info. --storage = "sql" -- Default is "internal" -- For the "sql" backend, you can uncomment *one* of the below to configure: --sql = { driver = "SQLite3", database = "prosody.sqlite" } -- Default. 'database' is the filename. --sql = { driver = "MySQL", database = "prosody", username = "prosody", password = "secret", host = "localhost" } --sql = { driver = "PostgreSQL", database = "prosody", username = "prosody", password = "secret", host = "localhost" } -- Logging configuration -- For advanced logging see http://prosody.im/doc/logging log = { info = "/var/log/prosody/prosody.log"; -- Change 'info' to 'debug' for verbose logging error = "/var/log/prosody/prosody.err"; "*syslog"; } ----------- Virtual hosts ----------- -- You need to add a VirtualHost entry for each domain you wish Prosody to serve. -- Settings under each VirtualHost entry apply *only* to that host. -- VirtualHost "localhost" VirtualHost "you.example.org" -- enabled = false -- Remove this line to enable this host authentication = "anonymous"; -- Assign this host a certificate for TLS, otherwise it would use the one -- set in the global section (if any). -- Note that old-style SSL on port 5223 only supports one certificate, and will always -- use the global one. ssl = { key = "/var/lib/prosody/you.example.org.key"; certificate = "/var/lib/prosody/you.example.org.crt"; } modules_enabled = { "bosh"; "pubsub"; } c2s_require_encryption = false VirtualHost "auth.you.example.org" ssl = { key = "/var/lib/prosody/auth.you.example.org.key"; certificate = "/var/lib/prosody/auth.you.example.org.crt"; } authentication = "internal_plain" ------ Components ------ -- You can specify components to add hosts that provide special services, -- like multi-user conferences, and transports. -- For more information on components, see http://prosody.im/doc/components ---Set up a MUC (multi-user chat) room server on conference.example.com: --Component "conference.example.com" "muc" -- Set up a SOCKS5 bytestream proxy for server-proxied file transfers: --Component "proxy.example.com" "proxy65" ---Set up an external component (default component port is 5347) -- -- External components allow adding various services, such as gateways/ -- transports to other networks like ICQ, MSN and Yahoo. For more info -- see: http://prosody.im/doc/components#adding_an_external_component -- --Component "gateway.example.com" -- component_secret = "password" Component "conference.you.example.org" "muc" Component "jitsi-videobridge.you.example.org" component_secret = "IfGaish6" Component "focus.you.example.org" component_secret = "kod93jd" 

添加軟連接

ln -s /etc/prosody/conf.avail/you.example.org.cfg.lua /etc/prosody/conf.d/you.example.org.cfg.lua

生成證書

prosodyctl cert generate you.example.org prosodyctl cert generate auth.you.example.org 

添加信任域名並生成證書

ln -sf /var/lib/prosody/auth.you.example.org.crt /usr/local/share/ca-certificates/you.example.org.crt update-ca-certificates -f 

請記住你輸入YOURSECRET3

prosodyctl register focus auth.you.example.org YOURSECRET3 

重新啟動prosody XMPP服務器

prosodyctl restart 

如果以上步奏有出現問題的，可以看我另一篇文章 搭建jitsi的prosody出現的問題

安裝Nginx

sudo apt-get install nginx 

添加nginx配置文件

不建議官方說的直接修改/etc/nginx/sites-availableweb文件，我這里選擇每一個domain都在conf.d目錄下新建個專門的配置

vim /etc/nginx/conf.d/you.example.org.conf 添加以下內容 server { listen 0.0.0.0:443 ssl http2; listen [::]:443 ssl http2; # tls configuration that is not covered in this guide # we recommend the use of https://certbot.eff.org/ server_name you.example.org; # set the root root /srv/jitsi-meet; index index.html; location ~ ^/([a-zA-Z0-9=\?]+)$ { rewrite ^/(.*)$ / break; } location / { ssi on; } # BOSH, Bidirectional-streams Over Synchronous HTTP # https://en.wikipedia.org/wiki/BOSH_(protocol) location /http-bind { proxy_pass http://localhost:5280/http-bind; proxy_set_header X-Forwarded-For $remote_addr; proxy_set_header Host $http_host; } # external_api.js must be accessible from the root of the # installation for the electron version of Jitsi Meet to work # https://github.com/jitsi/jitsi-meet-electron location /external_api.js { alias /srv/jitsi-meet/libs/external_api.min.js; } } 

簽發證書

WebRTC需要在https下進行通行，所以需要簽發證書

1.Create the certbot repository:

add-apt-repository ppa:certbot/certbot 

2. 安裝certbot

apt-get update apt-get install python-certbot-nginx 

3. 運行以下命令以使用NGINX插件生成證書：

sudo certbot --nginx -d you.example.org-d www.you.example.org 

提示輸入按回車就行 會讓你選擇，1.是自己手動配置證書，2.是幫你配置證書，我們選擇2就行

4.查看nginx配置

vim /etc/nginx/conf.d/you.example.org.conf 多出這個2個配置就算配置成功，如果沒有多出，那么就自己手動添加下，證書目錄在 /etc/letsencrypt/live/example.com/ 下 # RSA certificate ssl_certificate /etc/letsencrypt/live/example.com/fullchain.pem; # managed by Certbot ssl_certificate_key /etc/letsencrypt/live/example.com/privkey.pem; # managed by Certbot 

5.啟動nginx

nginx -t && nginx -s reload 

安裝Jitsi Videobridge

cd /opt && wget https://download.jitsi.org/jitsi-videobridge/linux/jitsi-videobridge-linux-x64-1120.zip unzip jitsi-videobridge-linux-x64-1120.zip 

如果提示404，請看我給官方提的問題dowload 404 或者自己clone官方的倉庫進行https://github.com/jitsi/jitsi-videobridge 安裝 或者找我，我給你一個文章壓縮文件

環境要求:JRE >= 1.7

安裝Java運行環境 apt-get install openjdk-8-jre 創建配置文件 mkdir -p ~/.sip-communicator cat > ~/.sip-communicator/sip-communicator.properties << EOF org.jitsi.impl.neomedia.transform.srtp.SRTPCryptoContext.checkReplay=false # The videobridge uses 443 by default with 4443 as a fallback, but since we're already # running nginx on 443 in this example doc, we specify 4443 manually to avoid a race condition org.jitsi.videobridge.TCP_HARVESTER_PORT=4443 EOF 

啟動程序

cd /opt/jitsi-videobridge-linux-x64-1120 && nohup ./jvb.sh --host=localhost --domain=you.example.org --port=5347 --secret=IfGaish6 > ~/jvb.log 2>&1 & echo $! > /var/run/jitsi-videobridge.pid 

安裝Jitsi jicofo

apt-get install openjdk-8-jdk maven cd /opt && git clone https://github.com/jitsi/jicofo.git cd jicofo 這里安裝會很慢 mvn package -T 1C -DskipTests -Dassembly.skipAssembly=false 安裝好后執行 unzip target/jicofo-1.1-SNAPSHOT-archive.zip 這里輸入你上面的YOURSECRET3 prosodyctl register focus auth.you.example.org YOURSECRET3 cd /opt/jicofo/jicofo-linux-x64-1.1-SNAPSHOT && nohup ./jicofo.sh --host=localhost --domain=you.example.org --secret=kod93jd --user_domain=auth.you.example.org --user_name=focus --user_password=YOURSECRET3 > ~/jicofo.log 2>&1 & 

部署jitsi Meet頁面

系統環境需要使用Nodejs>=12 npm>=6 推薦使用nvm管理多個Nodejs版本

wget -qO- https://raw.githubusercontent.com/nvm-sh/nvm/v0.35.3/install.sh | bash nvm ls 如果沒有輸出nvm 提示 輸入exit 退出shell。重新ssh進入服務器就好了 node 12.6.0 nvm install v12.6.0 

cd /srv git clone https://github.com/jitsi/jitsi-meet.git cd jitsi-meet 這里很多人install安裝依賴等了很久沒有成功，這也是我讓大家用國外的機器原因，國外的機器很快， 如果沒有國外機器建議用cnpm。或者找我，我把build好的node_modules給你。 npm install make 

注意nginx配置的路徑需要對應jitsi-meet的路徑

nginx配置 root /srv/jitsi-meet; index index.html; jitsi-meet的路徑 cd /srv git clone https://github.com/jitsi/jitsi-meet.git 

修改/srv/jitsi-meet/config.js

vim /srv/jitsi-meet/config.js var config = { hosts: { domain: 'you.example.org', muc: 'conference.you.example.org', bridge: 'jitsi-videobridge.you.example.org', focus: 'focus.you.example.org' }, useNicks: false, bosh: '//you.example.org/http-bind', // FIXME: use xep-0156 for that //chromeExtensionId: 'diibjkoicjeejcmhdnailmkgecihlobk', // Id of desktop streamer Chrome extension //minChromeExtVersion: '0.1' // Required version of Chrome extension }; 

重新啟動nginx

nginx -t && nginx -s reload 

打開你的https://you.example.org開始視頻通話吧

多人視頻通話

jitsi默認是2個人視頻通話，如果需要多個人通話，需要打開TCP/4443和UDP/10000端口 並配置

vim ~/.sip-communicator/sip-communicator.properties
org.ice4j.ice.harvest.NAT_HARVESTER_LOCAL_ADDRESS=<Local.IP.Address> 本地ip org.ice4j.ice.harvest.NAT_HARVESTER_PUBLIC_ADDRESS=<Public.IP.Address> 公網ip 

設置后kill掉java進程。重新啟動

ps -ef | grep java
kill -9 進程ID cd /opt/jitsi-videobridge-linux-x64-1120 && nohup ./jvb.sh --host=localhost --domain=you.example.org --port=5347 --secret=IfGaish6 > ~/jvb.log 2>&1 & echo $! > /var/run/jitsi-videobridge.pid cd /opt/jicofo/jicofo-linux-x64-1.1-SNAPSHOT && nohup ./jicofo.sh --host=localhost --domain=you.example.org --secret=kod93jd --user_domain=auth.you.example.org --user_name=focus --user_password=YOURSECRET3 > ~/jicofo.log 2>&1 & 

如果出現另外一個人進入視頻就掉線情況

vim ~/.sip-communicator/sip-communicator.properties org.jitsi.videobridge.SINGLE_PORT_HARVESTER_PORT=10000` org.ice4j.ice.harvest.STUN_MAPPING_HARVESTER_ADDRESSES=stun.l.google.com:19302,stun1.l.google.com:19302,stun2.l.google.com:19302 或者自己的stun服務器 

怎么搭建自己的stun服務器可以參考我的另一篇文章WebRTC之搭建coturn服務遇到的問題 重復上面的步奏kiil進程重新啟動

ps -ef | grep java
kill -9 進程ID cd /opt/jitsi-videobridge-linux-x64-1120 && nohup ./jvb.sh --host=localhost --domain=you.example.org --port=5347 --secret=IfGaish6 > ~/jvb.log 2>&1 & echo $! > /var/run/jitsi-videobridge.pid cd /opt/jicofo/jicofo-linux-x64-1.1-SNAPSHOT && nohup ./jicofo.sh --host=localhost --domain=you.example.org --secret=kod93jd --user_domain=auth.you.example.org --user_name=focus --user_password=YOURSECRET3 > ~/jicofo.log 2>&1 &