zsh.sh 源碼內容：
步驟：
1、將zsh.sh文件內容復制到文件，保存為zsh.sh
2、chmod 777 zsh.sh
3、sh -c zsh.sh
4、zsh # 切換到使用zsh
#!/bin/sh # # This script should be run via curl: # sh -c "$(curl -fsSL https://raw.githubusercontent.com/ohmyzsh/ohmyzsh/master/tools/install.sh)" # or wget: # sh -c "$(wget -qO- https://raw.githubusercontent.com/ohmyzsh/ohmyzsh/master/tools/install.sh)" # # As an alternative, you can first download the install script and run it afterwards: # wget https://raw.githubusercontent.com/ohmyzsh/ohmyzsh/master/tools/install.sh # sh install.sh # # You can tweak the install behavior by setting variables when running the script. For # example, to change the path to the Oh My Zsh repository: # ZSH=~/.zsh sh install.sh # # Respects the following environment variables: # ZSH - path to the Oh My Zsh repository folder (default: $HOME/.oh-my-zsh) # REPO - name of the GitHub repo to install from (default: ohmyzsh/ohmyzsh) # REMOTE - full remote URL of the git repo to install (default: GitHub via HTTPS) # BRANCH - branch to check out immediately after install (default: master) # # Other options: # CHSH - 'no' means the installer will not change the default shell (default: yes) # RUNZSH - 'no' means the installer will not run zsh after the install (default: yes) # KEEP_ZSHRC - 'yes' means the installer will not replace an existing .zshrc (default: no) # # You can also pass some arguments to the install script to set some these options: # --skip-chsh: has the same behavior as setting CHSH to 'no' # --unattended: sets both CHSH and RUNZSH to 'no' # --keep-zshrc: sets KEEP_ZSHRC to 'yes' # For example: # sh install.sh --unattended # set -e # Default settings ZSH=${ZSH:-~/.oh-my-zsh} REPO=${REPO:-ohmyzsh/ohmyzsh} REMOTE=${REMOTE:-https://github.com/${REPO}.git} BRANCH=${BRANCH:-master} # Other options CHSH=${CHSH:-yes} RUNZSH=${RUNZSH:-yes} KEEP_ZSHRC=${KEEP_ZSHRC:-no} command_exists() { command -v "$@" >/dev/null 2>&1 } error() { echo ${RED}"Error: $@"${RESET} >&2 } setup_color() { # Only use colors if connected to a terminal if [ -t 1 ]; then RED=$(printf '\033[31m') GREEN=$(printf '\033[32m') YELLOW=$(printf '\033[33m') BLUE=$(printf '\033[34m') BOLD=$(printf '\033[1m') RESET=$(printf '\033[m') else RED="" GREEN="" YELLOW="" BLUE="" BOLD="" RESET="" fi } setup_ohmyzsh() { # Prevent the cloned repository from having insecure permissions. Failing to do # so causes compinit() calls to fail with "command not found: compdef" errors # for users with insecure umasks (e.g., "002", allowing group writability). Note # that this will be ignored under Cygwin by default, as Windows ACLs take # precedence over umasks except for filesystems mounted with option "noacl". umask g-w,o-w echo "${BLUE}Cloning Oh My Zsh...${RESET}" command_exists git || { error "git is not installed" exit 1 } if [ "$OSTYPE" = cygwin ] && git --version | grep -q msysgit; then error "Windows/MSYS Git is not supported on Cygwin" error "Make sure the Cygwin git package is installed and is first on the \$PATH" exit 1 fi git clone -c core.eol=lf -c core.autocrlf=false \ -c fsck.zeroPaddedFilemode=ignore \ -c fetch.fsck.zeroPaddedFilemode=ignore \ -c receive.fsck.zeroPaddedFilemode=ignore \ --depth=1 --branch "$BRANCH" "$REMOTE" "$ZSH" || { error "git clone of oh-my-zsh repo failed" exit 1 } echo } setup_zshrc() { # Keep most recent old .zshrc at .zshrc.pre-oh-my-zsh, and older ones # with datestamp of installation that moved them aside, so we never actually # destroy a user's original zshrc echo "${BLUE}Looking for an existing zsh config...${RESET}" # Must use this exact name so uninstall.sh can find it OLD_ZSHRC=~/.zshrc.pre-oh-my-zsh if [ -f ~/.zshrc ] || [ -h ~/.zshrc ]; then # Skip this if the user doesn't want to replace an existing .zshrc if [ $KEEP_ZSHRC = yes ]; then echo "${YELLOW}Found ~/.zshrc.${RESET} ${GREEN}Keeping...${RESET}" return fi if [ -e "$OLD_ZSHRC" ]; then OLD_OLD_ZSHRC="${OLD_ZSHRC}-$(date +%Y-%m-%d_%H-%M-%S)" if [ -e "$OLD_OLD_ZSHRC" ]; then error "$OLD_OLD_ZSHRC exists. Can't back up ${OLD_ZSHRC}" error "re-run the installer again in a couple of seconds" exit 1 fi mv "$OLD_ZSHRC" "${OLD_OLD_ZSHRC}" echo "${YELLOW}Found old ~/.zshrc.pre-oh-my-zsh." \ "${GREEN}Backing up to ${OLD_OLD_ZSHRC}${RESET}" fi echo "${YELLOW}Found ~/.zshrc.${RESET} ${GREEN}Backing up to ${OLD_ZSHRC}${RESET}" mv ~/.zshrc "$OLD_ZSHRC" fi echo "${GREEN}Using the Oh My Zsh template file and adding it to ~/.zshrc.${RESET}" sed "/^export ZSH=/ c\\ export ZSH=\"$ZSH\" " "$ZSH/templates/zshrc.zsh-template" > ~/.zshrc-omztemp mv -f ~/.zshrc-omztemp ~/.zshrc echo } setup_shell() { # Skip setup if the user wants or stdin is closed (not running interactively). if [ $CHSH = no ]; then return fi # If this user's login shell is already "zsh", do not attempt to switch. if [ "$(basename "$SHELL")" = "zsh" ]; then return fi # If this platform doesn't provide a "chsh" command, bail out. if ! command_exists chsh; then cat <<-EOF I can't change your shell automatically because this system does not have chsh. ${BLUE}Please manually change your default shell to zsh${RESET} EOF return fi echo "${BLUE}Time to change your default shell to zsh:${RESET}" # Prompt for user choice on changing the default login shell printf "${YELLOW}Do you want to change your default shell to zsh? [Y/n]${RESET} " read opt case $opt in y*|Y*|"") echo "Changing the shell..." ;; n*|N*) echo "Shell change skipped."; return ;; *) echo "Invalid choice. Shell change skipped."; return ;; esac # Check if we're running on Termux case "$PREFIX" in *com.termux*) termux=true; zsh=zsh ;; *) termux=false ;; esac if [ "$termux" != true ]; then # Test for the right location of the "shells" file if [ -f /etc/shells ]; then shells_file=/etc/shells elif [ -f /usr/share/defaults/etc/shells ]; then # Solus OS shells_file=/usr/share/defaults/etc/shells else error "could not find /etc/shells file. Change your default shell manually." return fi # Get the path to the right zsh binary # 1. Use the most preceding one based on $PATH, then check that it's in the shells file # 2. If that fails, get a zsh path from the shells file, then check it actually exists if ! zsh=$(which zsh) || ! grep -qx "$zsh" "$shells_file"; then if ! zsh=$(grep '^/.*/zsh$' "$shells_file" | tail -1) || [ ! -f "$zsh" ]; then error "no zsh binary found or not present in '$shells_file'" error "change your default shell manually." return fi fi fi # We're going to change the default shell, so back up the current one if [ -n "$SHELL" ]; then echo $SHELL > ~/.shell.pre-oh-my-zsh else grep "^$USER:" /etc/passwd | awk -F: '{print $7}' > ~/.shell.pre-oh-my-zsh fi # Actually change the default shell to zsh if ! chsh -s "$zsh"; then error "chsh command unsuccessful. Change your default shell manually." else export SHELL="$zsh" echo "${GREEN}Shell successfully changed to '$zsh'.${RESET}" fi echo } main() { # Run as unattended if stdin is closed if [ ! -t 0 ]; then RUNZSH=no CHSH=no fi # Parse arguments while [ $# -gt 0 ]; do case $1 in --unattended) RUNZSH=no; CHSH=no ;; --skip-chsh) CHSH=no ;; --keep-zshrc) KEEP_ZSHRC=yes ;; esac shift done setup_color if ! command_exists zsh; then echo "${YELLOW}Zsh is not installed.${RESET} Please install zsh first." exit 1 fi if [ -d "$ZSH" ]; then cat <<-EOF ${YELLOW}You already have Oh My Zsh installed.${RESET} You'll need to remove '$ZSH' if you want to reinstall. EOF exit 1 fi setup_ohmyzsh setup_zshrc setup_shell printf "$GREEN" cat <<-'EOF' __ __ ____ / /_ ____ ___ __ __ ____ _____/ /_ / __ \/ __ \ / __ `__ \/ / / / /_ / / ___/ __ \ / /_/ / / / / / / / / / / /_/ / / /_(__ ) / / / \____/_/ /_/ /_/ /_/ /_/\__, / /___/____/_/ /_/ /____/ ....is now installed! Please look over the ~/.zshrc file to select plugins, themes, and options. p.s. Follow us on https://twitter.com/ohmyzsh p.p.s. Get stickers, shirts, and coffee mugs at https://shop.planetargon.com/collections/oh-my-zsh EOF printf "$RESET" if [ $RUNZSH = no ]; then echo "${YELLOW}Run zsh to try it out.${RESET}" exit fi exec zsh -l } main "$@"
#!/bin/sh # # This script should be run via curl: # sh -c "$(curl -fsSL https://raw.githubusercontent.com/ohmyzsh/ohmyzsh/master/tools/install.sh)" # or via wget: # sh -c "$(wget -qO- https://raw.githubusercontent.com/ohmyzsh/ohmyzsh/master/tools/install.sh)" # or via fetch: # sh -c "$(fetch -o - https://raw.githubusercontent.com/ohmyzsh/ohmyzsh/master/tools/install.sh)" # # As an alternative, you can first download the install script and run it afterwards: # wget https://raw.githubusercontent.com/ohmyzsh/ohmyzsh/master/tools/install.sh # sh install.sh # # You can tweak the install behavior by setting variables when running the script. For # example, to change the path to the Oh My Zsh repository: # ZSH=~/.zsh sh install.sh # # Respects the following environment variables: # ZSH - path to the Oh My Zsh repository folder (default: $HOME/.oh-my-zsh) # REPO - name of the GitHub repo to install from (default: ohmyzsh/ohmyzsh) # REMOTE - full remote URL of the git repo to install (default: GitHub via HTTPS) # BRANCH - branch to check out immediately after install (default: master) # # Other options: # CHSH - 'no' means the installer will not change the default shell (default: yes) # RUNZSH - 'no' means the installer will not run zsh after the install (default: yes) # KEEP_ZSHRC - 'yes' means the installer will not replace an existing .zshrc (default: no) # # You can also pass some arguments to the install script to set some these options: # --skip-chsh: has the same behavior as setting CHSH to 'no' # --unattended: sets both CHSH and RUNZSH to 'no' # --keep-zshrc: sets KEEP_ZSHRC to 'yes' # For example: # sh install.sh --unattended # or: # sh -c "$(curl -fsSL https://raw.githubusercontent.com/ohmyzsh/ohmyzsh/master/tools/install.sh)" "" --unattended # set -e # Track if $ZSH was provided custom_zsh=${ZSH:+yes} # Default settings ZSH=${ZSH:-~/.oh-my-zsh} REPO=${REPO:-ohmyzsh/ohmyzsh} REMOTE=${REMOTE:-https://github.com/${REPO}.git} BRANCH=${BRANCH:-master} # Other options CHSH=${CHSH:-yes} RUNZSH=${RUNZSH:-yes} KEEP_ZSHRC=${KEEP_ZSHRC:-no} command_exists() { command -v "$@" >/dev/null 2>&1 } fmt_error() { printf '%sError: %s%s\n' "$BOLD$RED" "$*" "$RESET" >&2 } fmt_underline() { printf '\033[4m%s\033[24m\n' "$*" } fmt_code() { # shellcheck disable=SC2016 # backtic in single-quote printf '`\033[38;5;247m%s%s`\n' "$*" "$RESET" } setup_color() { # Only use colors if connected to a terminal if [ -t 1 ]; then RED=$(printf '\033[31m') GREEN=$(printf '\033[32m') YELLOW=$(printf '\033[33m') BLUE=$(printf '\033[34m') BOLD=$(printf '\033[1m') RESET=$(printf '\033[m') else RED="" GREEN="" YELLOW="" BLUE="" BOLD="" RESET="" fi } setup_ohmyzsh() { # Prevent the cloned repository from having insecure permissions. Failing to do # so causes compinit() calls to fail with "command not found: compdef" errors # for users with insecure umasks (e.g., "002", allowing group writability). Note # that this will be ignored under Cygwin by default, as Windows ACLs take # precedence over umasks except for filesystems mounted with option "noacl". umask g-w,o-w echo "${BLUE}Cloning Oh My Zsh...${RESET}" command_exists git || { fmt_error "git is not installed" exit 1 } ostype=$(uname) if [ -z "${ostype%CYGWIN*}" ] && git --version | grep -q msysgit; then fmt_error "Windows/MSYS Git is not supported on Cygwin" fmt_error "Make sure the Cygwin git package is installed and is first on the \$PATH" exit 1 fi git clone -c core.eol=lf -c core.autocrlf=false \ -c fsck.zeroPaddedFilemode=ignore \ -c fetch.fsck.zeroPaddedFilemode=ignore \ -c receive.fsck.zeroPaddedFilemode=ignore \ --depth=1 --branch "$BRANCH" "$REMOTE" "$ZSH" || { fmt_error "git clone of oh-my-zsh repo failed" exit 1 } echo } setup_zshrc() { # Keep most recent old .zshrc at .zshrc.pre-oh-my-zsh, and older ones # with datestamp of installation that moved them aside, so we never actually # destroy a user's original zshrc echo "${BLUE}Looking for an existing zsh config...${RESET}" # Must use this exact name so uninstall.sh can find it OLD_ZSHRC=~/.zshrc.pre-oh-my-zsh if [ -f ~/.zshrc ] || [ -h ~/.zshrc ]; then # Skip this if the user doesn't want to replace an existing .zshrc if [ "$KEEP_ZSHRC" = yes ]; then echo "${YELLOW}Found ~/.zshrc.${RESET} ${GREEN}Keeping...${RESET}" return fi if [ -e "$OLD_ZSHRC" ]; then OLD_OLD_ZSHRC="${OLD_ZSHRC}-$(date +%Y-%m-%d_%H-%M-%S)" if [ -e "$OLD_OLD_ZSHRC" ]; then fmt_error "$OLD_OLD_ZSHRC exists. Can't back up ${OLD_ZSHRC}" fmt_error "re-run the installer again in a couple of seconds" exit 1 fi mv "$OLD_ZSHRC" "${OLD_OLD_ZSHRC}" echo "${YELLOW}Found old ~/.zshrc.pre-oh-my-zsh." \ "${GREEN}Backing up to ${OLD_OLD_ZSHRC}${RESET}" fi echo "${YELLOW}Found ~/.zshrc.${RESET} ${GREEN}Backing up to ${OLD_ZSHRC}${RESET}" mv ~/.zshrc "$OLD_ZSHRC" fi echo "${GREEN}Using the Oh My Zsh template file and adding it to ~/.zshrc.${RESET}" sed "/^export ZSH=/ c\\ export ZSH=\"$ZSH\" " "$ZSH/templates/zshrc.zsh-template" > ~/.zshrc-omztemp mv -f ~/.zshrc-omztemp ~/.zshrc echo } setup_shell() { # Skip setup if the user wants or stdin is closed (not running interactively). if [ "$CHSH" = no ]; then return fi # If this user's login shell is already "zsh", do not attempt to switch. if [ "$(basename -- "$SHELL")" = "zsh" ]; then return fi # If this platform doesn't provide a "chsh" command, bail out. if ! command_exists chsh; then cat <<EOF I can't change your shell automatically because this system does not have chsh. ${BLUE}Please manually change your default shell to zsh${RESET} EOF return fi echo "${BLUE}Time to change your default shell to zsh:${RESET}" # Prompt for user choice on changing the default login shell printf '%sDo you want to change your default shell to zsh? [Y/n]%s ' \ "$YELLOW" "$RESET" read -r opt case $opt in y*|Y*|"") echo "Changing the shell..." ;; n*|N*) echo "Shell change skipped."; return ;; *) echo "Invalid choice. Shell change skipped."; return ;; esac # Check if we're running on Termux case "$PREFIX" in *com.termux*) termux=true; zsh=zsh ;; *) termux=false ;; esac if [ "$termux" != true ]; then # Test for the right location of the "shells" file if [ -f /etc/shells ]; then shells_file=/etc/shells elif [ -f /usr/share/defaults/etc/shells ]; then # Solus OS shells_file=/usr/share/defaults/etc/shells else fmt_error "could not find /etc/shells file. Change your default shell manually." return fi # Get the path to the right zsh binary # 1. Use the most preceding one based on $PATH, then check that it's in the shells file # 2. If that fails, get a zsh path from the shells file, then check it actually exists if ! zsh=$(command -v zsh) || ! grep -qx "$zsh" "$shells_file"; then if ! zsh=$(grep '^/.*/zsh$' "$shells_file" | tail -1) || [ ! -f "$zsh" ]; then fmt_error "no zsh binary found or not present in '$shells_file'" fmt_error "change your default shell manually." return fi fi fi # We're going to change the default shell, so back up the current one if [ -n "$SHELL" ]; then echo "$SHELL" > ~/.shell.pre-oh-my-zsh else grep "^$USERNAME:" /etc/passwd | awk -F: '{print $7}' > ~/.shell.pre-oh-my-zsh fi # Actually change the default shell to zsh if ! chsh -s "$zsh"; then fmt_error "chsh command unsuccessful. Change your default shell manually." else export SHELL="$zsh" echo "${GREEN}Shell successfully changed to '$zsh'.${RESET}" fi echo } main() { # Run as unattended if stdin is not a tty if [ ! -t 0 ]; then RUNZSH=no CHSH=no fi # Parse arguments while [ $# -gt 0 ]; do case $1 in --unattended) RUNZSH=no; CHSH=no ;; --skip-chsh) CHSH=no ;; --keep-zshrc) KEEP_ZSHRC=yes ;; esac shift done setup_color if ! command_exists zsh; then echo "${YELLOW}Zsh is not installed.${RESET} Please install zsh first." exit 1 fi if [ -d "$ZSH" ]; then echo "${YELLOW}The \$ZSH folder already exists ($ZSH).${RESET}" if [ "$custom_zsh" = yes ]; then cat <<EOF You ran the installer with the \$ZSH setting or the \$ZSH variable is exported. You have 3 options: 1. Unset the ZSH variable when calling the installer: $(fmt_code "ZSH= sh install.sh") 2. Install Oh My Zsh to a directory that doesn't exist yet: $(fmt_code "ZSH=path/to/new/ohmyzsh/folder sh install.sh") 3. (Caution) If the folder doesn't contain important information, you can just remove it with $(fmt_code "rm -r $ZSH") EOF else echo "You'll need to remove it if you want to reinstall." fi exit 1 fi setup_ohmyzsh setup_zshrc setup_shell printf %s "$GREEN" cat <<'EOF' __ __ ____ / /_ ____ ___ __ __ ____ _____/ /_ / __ \/ __ \ / __ `__ \/ / / / /_ / / ___/ __ \ / /_/ / / / / / / / / / / /_/ / / /_(__ ) / / / \____/_/ /_/ /_/ /_/ /_/\__, / /___/____/_/ /_/ /____/ ....is now installed! EOF cat <<EOF Before you scream Oh My Zsh! please look over the ~/.zshrc file to select plugins, themes, and options. • Follow us on Twitter: $(fmt_underline https://twitter.com/ohmyzsh) • Join our Discord server: $(fmt_underline https://discord.gg/ohmyzsh) • Get stickers, shirts, coffee mugs and other swag: $(fmt_underline https://shop.planetargon.com/collections/oh-my-zsh) EOF printf %s "$RESET" if [ $RUNZSH = no ]; then echo "${YELLOW}Run zsh to try it out.${RESET}" exit fi exec zsh -l } main "$@"
oh-my-zsh：
下載地址：https://github.com/ohmyzsh/ohmyzsh
sudo apt install git sudo apt install zsh wget https://github.com/robbyrussell/oh-my-zsh/raw/master/tools/install.sh -O - | sh chsh -s /usr/bin/zsh # 切換使用zsh
cat /etc/shells # 查看有哪些shell
chsh -s /bin/bash # 切換使用bash
主題：
oh-my-zsh自帶100多個主題，主題的配置文件在 ~/.zshrc文件中，找到這一行：
ZSH_THEME="robbyrussell"
你可以將值改成任意主題，oh-my-zsh的主題可以在【https://github.com/robbyrussell/oh-my-zsh/wiki/themes】找到。
保存好文件后，執行 source ~/.zshrc 使配置生效。如果你將值設為空，表示不使用任何主題；你也可以設置為"random"，你每次打開都會隨機選擇一個主題。
推薦主題： agnoster
由於這個主題使用了一些特殊字符，需要安裝字體：
sudo apt-get install fonts-powerline
字體：
下載地址：https://github.com/powerline/fonts
安裝Oh-my-zsh
兩種安裝方式：
## wget 安裝方式 sh -c "$(wget https://raw.githubusercontent.com/robbyrussell/oh-my-zsh/master/tools/install.sh -O -)" ## curl 安裝方式 sh -c "$(curl -fsSL https://raw.githubusercontent.com/robbyrussell/oh-my-zsh/master/tools/install.sh)"
如果網絡不好，會出現 拒絕鏈接 的字樣，多試幾次就好了。
oh-my-zsh開源地址：https://github.com/robbyrussell/oh-my-zsh
安裝PowerLine
1、先安裝pip sudo easy_install pip 2、再安裝PowerLine pip install powerline-status --user 3、安裝PowerFonts madir ~/Desktop/OpenSource cd ~/Desktop/OpenSource git clone https://github.com/powerline/fonts.git --depth=1 cd fonts ./install.sh
安裝好字體庫之后，我們來設置iTerm2的字體，具體的操作是iTerm2 -> Preferences -> Profiles -> Text，在Font區域選中Change Font，然后找到Meslo LG字體。有L、M、S可選，看個人喜好：
1、安裝配色方案：
配色方案在使用VIM或Colorful Log時會變得非常有用，同時界面也不會一片黑綠一樣死板。
同樣使用git clone的方式下載源碼進行安裝：
cd ~/Desktop/OpenSource git clone https://github.com/altercation/solarized cd solarized/iterm2-colors-solarized/ open .
在打開的finder窗口中，雙擊Solarized Dark.itermcolors 和 Solarized Light.itermcolors即可安裝明暗兩種配色：
再次進入iTerm2 -> Preferences -> Profiles -> Colors -> Color Presets中根據個人喜好選擇這兩種配色中的一種即可：
2、安裝主題：
下載agnoster主題，執行腳本安裝
cd ~/Desktop/Opeurce git clone https://github.com/fcamblor/oh-my-zsh-agnoster-fcamblor.git cd oh-my-zsh-agnoster-fcamblor/ ./install
拷貝完成后，執行命令打開zshrc配置文件，將ZSH_THEME后面的字段改為agnoster。
vi ~/.zshrc
修改完成后按一下esc調出vi命令，輸入:wq保存並退出vi模式。
此時command+Q或source配置文件后，iTerm2變了模樣.
3、安裝高亮插件：
這是oh my zsh的一個插件，安裝方式與theme大同小異：
cd ~/.oh-my-zsh/custom/plugins/ git clone https://github.com/zsh-users/zsh-syntax-highlighting.git vi ~/.zshrc
這時我們再次打開zshrc文件進行編輯。找到plugins，此時plugins中應該已經有了git，我們需要把高亮插件也加上.
請務必保證插件順序，zsh-syntax-highlighting必須在最后一個。
然后在文件的最后一行添加：
source ~/.oh-my-zsh/custom/plugins/zsh-syntax-highlighting/zsh-syntax-highlighting.zsh
按一下esc調出vi命令，輸入:wq保存並退出vi模式。
執行命令使剛才的修改生效：
source ~/.zshrc
至此大功告成.
更換背景圖片方式：
iTerm2 -> Preferences -> Profiles -> Window -> BackGround Image勾選圖片即可。
4、命令補全插件：
跟代碼高亮的安裝方式一樣，這也是一個zsh的插件，叫做zsh-autosuggestion，用於命令建議和補全。
cd ~/.oh-my-zsh/custom/plugins/ git clone https://github.com/zsh-users/zsh-autosuggestions vi ~/.zshrc
找到plugins，加上這個插件即可.
有同學說補全命令的字體不太清晰，與背景顏色太過相近，其實可以自己調整一下字體顏色。
Preferences -> Profiles -> Colors -> Foreground->(156,207,213)
(156,207,213)
5、調整窗口大小：
調整新建終端的窗口大小：
Preferences -> Profiles -> Window -> Setting for new windows -> (120,35)