CentOS7離線安裝firewalld及端口配置

一、安裝

1. 依賴模塊

ebtables-2.0.10-13.el7.x86_64.rpm
libselinux-python-2.2.2-6.el7.x86_64.rpm
python-slip-0.4.0-2.el7.noarch.rpm
python-slip-dbus-0.4.0-2.el7.noarch.rpm
firewalld-0.3.9-14.el7.noarch.rpm

2. 安裝模塊

rpm -ivh ebtables-2.0.10-13.el7.x86_64.rpm
rpm -ivh libselinux-python-2.2.2-6.el7.x86_64.rpm
rpm -ivh python-slip-0.4.0-2.el7.noarch.rpm
rpm -ivh python-slip-dbus-0.4.0-2.el7.noarch.rpm

rpm -ivh firewalld-0.3.9-14.el7.noarch.rpm --nodeps --force

3. 相關rpm打包下載地址

https://files.cnblogs.com/files/luoxiaolei/安裝firewalld.zip

二、開放端口

1. 開放端口

firewall-cmd --zone=public --add-port=80/tcp --permanent

systemctl restart firewalld.service

2. 針對特定IP開放特定端口

source address 特定IP
port port 特定端口
firewall-cmd --permanent --add-rich-rule="rule family=ipv4 source address=11.64.221.10 port port=3306 protocol=tcp accept"

firewall-cmd --reload