centos系統systemctl restart network啟動失敗，提示“code=exited status=1”

本文轉載自查看原文 2021-02-10 15:00 765 VMware

centos虛擬機時我復制過來的，IP地址、mac地址都與別人的沖突，首先需要修改mac地址和ip地址。

修改ip配置 /etc/sysconfig/network-scripts/ifcfg-ens33，注意修改一下4個紅色字體的參數

[root@localhost bin]# more /etc/sysconfig/network-scripts/ifcfg-ens33
TYPE=Ethernet
PROXY_METHOD=none
BROWSER_ONLY=no
BOOTPROTO=static
DEFROUTE=yes
IPV4_FAILURE_FATAL=no
IPV6INIT=yes
IPV6_AUTOCONF=yes
IPV6_DEFROUTE=yes
IPV6_FAILURE_FATAL=no
IPV6_ADDR_GEN_MODE=stable-privacy
NAME=ens33
UUID=a903e483-d2b3-407d-8327-3cd37d4785f2
DEVICE=ens33
ONBOOT=yes

IPADDR=192.168.226.129
NETMASK=255.255.255.0
GATEWAY=
DNS=192.168.226.2

HWADDR=00:50:56:3C:91:A4

然后執行systemctl restart network啟動失敗

解決辦法：

systemctl stop NetworkManager
systemctl disable NetworkManager
reboot

systemctl start network.service

免責聲明！

本站轉載的文章為個人學習借鑒使用，本站對版權不負任何法律責任。如果侵犯了您的隱私權益，請聯系本站郵箱yoyou2525@163.com刪除。

猜您在找 linux----------啟動network的時候報錯Job for network.service failed because the control process exited with error code. See "systemctl status network.service" and "journalctl -xe" for details. Linux 重啟網卡失敗 Job for network.service failed because the control process exited with error code. See "systemctl status network.service" and "journalctl -xe" for details. Job for network.service failed. See 'systemctl status network.service' and 'journalctl -xn。Centos7 無法啟動網絡(service network restart)錯誤解決辦法（個人經驗） CentOS7.2解決vsftpd啟動失敗，code=exited,status=2問題的幾個方法參考 CentOS7 啟動docker.service失敗(code=exited, status=1/FAILURE) code=exited,status=1/FAILURE【docker安裝啟動失敗】 centOS 7一個解決“network.service: control process exited, code=exited status=1”方法 Restarting network (via systemctl): Job for network.service failed because the control process exited with error code. See "systemctl status network.service" and "journalctl -xe" for details. Jenkins 安裝啟動提示“iJob for jenkins.service failed because the control process exited with error code. See "systemctl status jenkins.service" and "journalctl -xe" for details.” docker 啟動失敗 Job for docker.service failed because the control process exited with error code. See "systemctl status docker.service" and "journalctl -xe" for details.