記錄universe bios 操作指南；universe-bios 主要是街機NEO-GEO的BIOS系統，可以對游戲進行設置，開啟隱藏功能；當我們只使用手柄進行控制的時候，使用UNIBIOS可以使得手柄能夠快速配置游戲；
The UNIVERSE BIOS is for owners of MVS or AES hardware that want an easy way to change country region or between Arcade or Console mode on boot. Also included are other features that are not possible using the standard MVS bios.
The UNIVERSE BIOS is also designed to give easy access to things like inserting coins, test mode and memory card management when using the joystick ports only. Of course the BIOS still allows standard operation too
下圖是雙截龍在 universe-bios下的運行場景；使用universe系統可以進行后台設置，開啟隱藏的Duke&Shuko人物等，或者通過設置調試碼，進行調試；
在更換最新的UNIBIOS-4.0后，界面：
對應的功能也相對增多了；
UNIBIOS 的使用：
USING THE UNIVERSE BIOS (MVS only) ---------------------------------- The first time a MVS system is switched on after UNIVERSE BIOS installation the system will default to EURO region and ARCADE operation mode. The BootUp HW Test option will be disabled by default also. You can change any of these settings to your desired setup at any time by following the information in this manual. Important Notes --------------- If the systems backup SRAM battery is dead any changed settings will be lost on power down and the default settings will be reloaded. I would suggest recharging or replacing the onboard battery in this situation. The backup SRAM is totally cleared the first time the UNIVERSE BIOS is run on a MVS system, this is to ensure compatibility. USING THE UNIVERSE BIOS (AES only) ---------------------------------- Because the AES system has no backup SRAM the system will use the memory card to store the systems region and operation mode settings. This info is then read once at power on, its not read again after using the system reset button or soft reset option. If a memory card is not present the system will default to EURO region and CONSOLE operation mode on power up, you can then change this as required once you reach the splash screen. Important Notes --------------- The hardware test will keep looping until you release its button code. The screen flashes each time the hardware check loops itself. Hard DIPs are all set in the off position and cannot be changed. When in ARCADE mode you cannot disable developer mode. Accessing Menus --------------- The following codes should be used while the splash screen is showing or held during system power up (splash disabled). Button codes will only work on player 1 controls. A+B+C = Main UNIVERSE BIOS Menu A+B+C+D = Memory Card Manager B+C+D = Test mode (MVS only) B+C+D = Hardware Test (AES only) (Use 2up controller for the code below) A+B+C+D = Controller Test (AES only) The following codes are available in game only, they will not work if you have disabled the in game menu (general bios settings). START+SELECT = In Game Menu START+COIN = In Game Menu START+A+B+C = In Game Menu The Main Menu ------------- To navigate the UNIVERSE BIOS menu you will need to use player 1 controls, button (A) is used as select, (C) to exit. Here is a list of all available options along with a small description. Region Settings --------------- This is where you choose your region and operation mode of the BIOS. Any settings made on this screen are permanently saved until you decide to change them. General Settings (MVS only) --------------------------- Like the region settings these setting are also saved until changed. - Disable BootUp HW Test This option forces the UNIVERSE BIOS to skip some hardware tests at power on, it makes booting faster but you have no guarantee the system is in full working order. This option is on by default. - Disable In Game Menu This option disables the in game menu when enabled. - Disable Input Crossing When enabled this option will disable the input crossing feature. - Enable Cabinet Fixes When enabled 1Up (A) and (B) buttons will act as game select buttons during attract mode on multislot hardware. This option also registers a coin entered into a cab with only one coin chute to the 2Up side if 2Up (START) is held down while coin is inserted. Only works in ARCADE mode while 2 coin counters are drawn on screen. - Disable Splash Screen This option disables the splash screen at startup when enabled. - Enable Arcade Protect This setting is designed to allow the Universe Bios to be run easier in an arcade environment. When enabled either the TEST MODE button must also be pressed or hard DIP 1 must be ON for button codes at the splash screen to work. This setting also forces the system to reset if a game should crash instead of giving an error. Game SoftDIP Settings (AES only) -------------------------------- Here you can change game settings like the amount of lives given per game, amount of time rounds lasts or enable blood for example. Note that Soft DIPs are reset on changing the country region so always select your region setup before editing any soft DIPs. GameCart CRC Check ------------------ Here you can check that a games program data is correct by using the CRC32 algorithm. The screen will display the GAME ID and CRC32 for each memory region used. The result is then checked against an internal database to confirm its good. Possible messages resulting from this check are; OK - CRC32 Good NG - CRC32 Bad ?? - CRC32 not in database DO NOT take the above output as 100% accurate as some CRC32 values in the database are probably wrong (bad dumps etc). If your game does give a different CRC32 than whats expected then please email the details to us (info@universebios.com). Jukebox Music Player -------------------- Here you can listen to music from games. Each tune or sound is assigned a sound code. By selecting different codes you will hear different tunes or game fx. PC-2-NEO -------- This feature allows you to send and receive data from the NeoGeo using a cable that is connected to the 2UP joystick port. Using this feature gives one the ability to run your own code on the system or backup memory cards for example. This feature should be considered beta at this point but is known to work. Please visit the official homepage for more information on how to build the cable or download the needed PC software. The In Game Menu ---------------- To navigate the In Game menus use player one controls and button (A) to select. Not doing anything for a short period will cause the screen to blank while idle. This feature prevents monitor burn if using the In Game menu to pause games. Available options are. The Cheat Database ------------------ Everything is quite straight forward here although using cheats can cause adverse game effects. For example, if you experience game lockups when using a cheat try turning it off which may allow the game to continue and then enable it again later. Cheats can also cause GFX issues, most notably at the end for energy bars. On MULTISLOT hardware any active cheats will be disabled when changing game, they will not be restored automatically. Debug DIP Settings ------------------ These settings are more advanced. Debug DIPS do different things depending on the game, unless you know what your doing its best to leave them alone although experimenting wont cause damage. If a cheat is enabled that uses a games debug dip address you will see it via a highlighted number under the DIP value. Patch Memory ------------ Here you can manually choose addresses in the NeoGeo memory space and patch byte values there. For example by placing different values into 0x320000 you can change any currently playing music. You can also use this feature for cheats and other stuff. Last menu option (selectable) ----------------------------- The final menu setting is changeable, do this by moving the joystick left or right once highlighted. Possible options are; Soft Reboot System Menu Color Changer Main Memory Viewer Video RAM Viewer PC-2-NEO Input Crossing -------------- This feature gives you the ability to use the joystick ports (if the system has them) and the JAMMA connector for things they werent initially designed for. Heres a breakdown on how it works. When using the joystick ports (if the system has them) the select buttons will insert coins when pressed if running in arcade mode. On MULTISLOT hardware this is disabled when more than one game found (ensures correct game changing operation). When using the JAMMA connection for joystick control the coin switches (for getting credits) become player 1 and player 2 select buttons when in console mode (see known issues). On a MULTISLOT system the joystick port select buttons and JAMMA connector select game pins do the same thing (by hardware design). This means you can use the game select buttons as player 1 and player 2 select buttons too. On a MULTISLOT system game selecting is only available during the attract mode sequence when in console mode.
資源鏈接：https://github.com/yaowenxu/Projects/tree/master/Nebula/UNI-BIOS
Tips1:
在kawaks模擬器中，使用cheats可以達到同樣的效果；但是kawaks模擬器不支持UNIBIOS的加載；在MAME和Nebula系統中，可以使用UNIBIOS手動修改；我甚至懷疑Nebula底層是基於MAME系統制作的；
根據模擬器網站：http://www.emulator-zone.com/doc.php/arcade/nebula.html 的介紹：The emulator is using the MAME naming system so any mame compatible game that is supported should have the same name.
我相信Nebula系統在設計和實現過程中是參考了mame項目，設計機制也是和mame系統相似的；從個人使用情況來看，Nebula系統使用起來更為簡潔和友好；
Kawaks Cheats可以參考：https://github.com/Game-Emulators/Kawaks-ROMs/tree/master/cheats
Tips2:
經過測試，Kawaks的Cheats 在Nebula模擬器中也能正常使用，我相信這是它們共用一套游戲命名機制的原因；Cheats在Nebula系統中稱為金手指，使用效果如下：
注意：在使用金手指的時候，不能使用UNIBIOS模式；應直接使用模擬器運行；
但個人覺得，還是UNIBIOS系統好用；感謝作者的無私貢獻；
保持更新；更多內容請關注cnblogs.com/xuyaowen; 如果有不明白的地方，歡迎在博客下面留言交流；