刪除節點
通過以下命令刪除節點，nodename指需要刪除的節點名。
./kk delete node <nodeName> -f config-sample.yaml
現在我的需求是刪除node8。
[root@master1 ~]# sudo ./kk delete node node8 -f config-sample.yaml Are you sure to delete this node? [yes/no]: yes INFO[16:56:39 CST] Resetting kubernetes node ... [master1 192.168.131.60] MSG: node1 node10 node11 node12 node13 node14 node15 node16 node17 node18 node19 node2 node20 node21 node22 node23 node24 node25 node26 node27 node28 node3 node4 node5 node6 node7 node8 node9 [master1 192.168.131.60] MSG: node/node8 already cordoned WARNING: ignoring DaemonSet-managed Pods: kube-system/calico-node-lgp6x, kube-system/kube-proxy-tncvq, kube-system/nodelocaldns-5ngfw, kube-system/openebs-ndm-vfsx9, kubesphere-logging-system/fluent-bit-rljhx, kubesphere-monitoring-system/node-exporter-x7mjk node/node8 drained [master1 192.168.131.60] MSG: node "node8" deleted INFO[16:56:41 CST] Successful.
此時查看集群node節點發現已經沒有node8了，並且config-sample.yaml集群配置文件中node8信息也被刪除。
config-sample.yaml
apiVersion: kubekey.kubesphere.io/v1alpha1
kind: Cluster
metadata:
name: pansoft-pre
spec:
hosts:
- {name: master1, address: 192.168.131.60, internalAddress: 192.168.131.60, privateKeyPath: "~/.ssh/id_rsa"}
- {name: master2, address: 192.168.131.61, internalAddress: 192.168.131.61, privateKeyPath: "~/.ssh/id_rsa"}
- {name: master3, address: 192.168.131.62, internalAddress: 192.168.131.62, privateKeyPath: "~/.ssh/id_rsa"}
- {name: node1, address: 192.168.131.63, internalAddress: 192.168.131.63, privateKeyPath: "~/.ssh/id_rsa"}
- {name: node2, address: 192.168.131.64, internalAddress: 192.168.131.64, privateKeyPath: "~/.ssh/id_rsa"}
- {name: node3, address: 192.168.131.65, internalAddress: 192.168.131.65, privateKeyPath: "~/.ssh/id_rsa"}
- {name: node4, address: 192.168.131.66, internalAddress: 192.168.131.66, privateKeyPath: "~/.ssh/id_rsa"}
- {name: node5, address: 192.168.131.67, internalAddress: 192.168.131.67, privateKeyPath: "~/.ssh/id_rsa"}
- {name: node6, address: 192.168.131.68, internalAddress: 192.168.131.68, privateKeyPath: "~/.ssh/id_rsa"}
- {name: node7, address: 192.168.131.69, internalAddress: 192.168.131.69, privateKeyPath: "~/.ssh/id_rsa"}
- {name: node9, address: 192.168.131.91, internalAddress: 192.168.131.91, privateKeyPath: "~/.ssh/id_rsa"}
- {name: node10, address: 192.168.131.92, internalAddress: 192.168.131.92, privateKeyPath: "~/.ssh/id_rsa"}
- {name: node11, address: 192.168.131.93, internalAddress: 192.168.131.93, privateKeyPath: "~/.ssh/id_rsa"}
- {name: node12, address: 192.168.131.94, internalAddress: 192.168.131.94, privateKeyPath: "~/.ssh/id_rsa"}
- {name: node13, address: 192.168.131.95, internalAddress: 192.168.131.95, privateKeyPath: "~/.ssh/id_rsa"}
- {name: node14, address: 192.168.131.96, internalAddress: 192.168.131.96, privateKeyPath: "~/.ssh/id_rsa"}
- {name: node15, address: 192.168.131.97, internalAddress: 192.168.131.97, privateKeyPath: "~/.ssh/id_rsa"}
- {name: node16, address: 192.168.131.98, internalAddress: 192.168.131.98, privateKeyPath: "~/.ssh/id_rsa"}
- {name: node17, address: 192.168.131.99, internalAddress: 192.168.131.99, privateKeyPath: "~/.ssh/id_rsa"}
- {name: node18, address: 192.168.131.100, internalAddress: 192.168.131.100, privateKeyPath: "~/.ssh/id_rsa"}
- {name: node19, address: 192.168.131.101, internalAddress: 192.168.131.101, privateKeyPath: "~/.ssh/id_rsa"}
- {name: node20, address: 192.168.131.102, internalAddress: 192.168.131.102, privateKeyPath: "~/.ssh/id_rsa"}
- {name: node21, address: 192.168.131.103, internalAddress: 192.168.131.103, privateKeyPath: "~/.ssh/id_rsa"}
- {name: node22, address: 192.168.131.104, internalAddress: 192.168.131.104, privateKeyPath: "~/.ssh/id_rsa"}
- {name: node23, address: 192.168.131.105, internalAddress: 192.168.131.105, privateKeyPath: "~/.ssh/id_rsa"}
- {name: node24, address: 192.168.131.106, internalAddress: 192.168.131.106, privateKeyPath: "~/.ssh/id_rsa"}
- {name: node25, address: 192.168.131.107, internalAddress: 192.168.131.107, privateKeyPath: "~/.ssh/id_rsa"}
- {name: node26, address: 192.168.131.108, internalAddress: 192.168.131.108, privateKeyPath: "~/.ssh/id_rsa"}
- {name: node27, address: 192.168.131.109, internalAddress: 192.168.131.109, privateKeyPath: "~/.ssh/id_rsa"}
- {name: node28, address: 192.168.131.110, internalAddress: 192.168.131.110, privateKeyPath: "~/.ssh/id_rsa"}
roleGroups:
etcd:
- master1
- master2
- master3
master:
- master1
- master2
- master3
worker:
- node[9:28]
- node[1:7]
controlPlaneEndpoint:
domain: lb.kubesphere.local
# vip
address: "192.168.131.60"
port: "16443"
kubernetes:
version: v1.18.6
imageRepo: kubesphere
clusterName: cluster.local
masqueradeAll: false # masqueradeAll tells kube-proxy to SNAT everything if using the pure iptables proxy mode. [Default: false]
maxPods: 110 # maxPods is the number of pods that can run on this Kubelet. [Default: 110]
nodeCidrMaskSize: 24 # internal network node size allocation. This is the size allocated to each node on your network. [Default: 24]
proxyMode: ipvs # mode specifies which proxy mode to use. [Default: ipvs]
network:
plugin: calico
calico:
ipipMode: Always # IPIP Mode to use for the IPv4 POOL created at start up. If set to a value other than Never, vxlanMode should be set to "Never". [Always | CrossSubnet | Never] [Default: Always]
vxlanMode: Never # VXLAN Mode to use for the IPv4 POOL created at start up. If set to a value other than Never, ipipMode should be set to "Never". [Always | CrossSubnet | Never] [Default: Never]
vethMTU: 1440 # The maximum transmission unit (MTU) setting determines the largest packet size that can be transmitted through your network. [Default: 1440]
kubePodsCIDR: 10.233.64.0/18
kubeServiceCIDR: 10.233.0.0/18
registry:
registryMirrors: []
insecureRegistries: []
privateRegistry: ""
storage:
defaultStorageClass: localVolume
localVolume:
storageClassName: local
---
apiVersion: installer.kubesphere.io/v1alpha1
kind: ClusterConfiguration
metadata:
name: ks-installer
namespace: kubesphere-system
labels:
version: v3.0.0
spec:
local_registry: ""
persistence:
storageClass: ""
authentication:
jwtSecret: ""
etcd:
monitoring: true # Whether to install etcd monitoring dashboard
endpointIps: 192.168.131.60,192.168.131.61,192.168.131.62 # etcd cluster endpointIps
port: 2379 # etcd port
tlsEnable: true
common:
mysqlVolumeSize: 20Gi # MySQL PVC size
minioVolumeSize: 20Gi # Minio PVC size
etcdVolumeSize: 20Gi # etcd PVC size
openldapVolumeSize: 2Gi # openldap PVC size
redisVolumSize: 2Gi # Redis PVC size
es: # Storage backend for logging, tracing, events and auditing.
elasticsearchMasterReplicas: 1 # total number of master nodes, it's not allowed to use even number
elasticsearchDataReplicas: 1 # total number of data nodes
elasticsearchMasterVolumeSize: 4Gi # Volume size of Elasticsearch master nodes
elasticsearchDataVolumeSize: 20Gi # Volume size of Elasticsearch data nodes
logMaxAge: 7 # Log retention time in built-in Elasticsearch, it is 7 days by default.
elkPrefix: logstash # The string making up index names. The index name will be formatted as ks-<elk_prefix>-log
# externalElasticsearchUrl:
# externalElasticsearchPort:
console:
enableMultiLogin: true # enable/disable multiple sing on, it allows an account can be used by different users at the same time.
port: 30880
alerting: # Whether to install KubeSphere alerting system. It enables Users to customize alerting policies to send messages to receivers in time with different time intervals and alerting levels to choose from.
enabled: true
auditing: # Whether to install KubeSphere audit log system. It provides a security-relevant chronological set of records，recording the sequence of activities happened in platform, initiated by different tenants.
enabled: true
devops: # Whether to install KubeSphere DevOps System. It provides out-of-box CI/CD system based on Jenkins, and automated workflow tools including Source-to-Image & Binary-to-Image
enabled: true
jenkinsMemoryLim: 2Gi # Jenkins memory limit
jenkinsMemoryReq: 1500Mi # Jenkins memory request
jenkinsVolumeSize: 8Gi # Jenkins volume size
jenkinsJavaOpts_Xms: 512m # The following three fields are JVM parameters
jenkinsJavaOpts_Xmx: 512m
jenkinsJavaOpts_MaxRAM: 2g
events: # Whether to install KubeSphere events system. It provides a graphical web console for Kubernetes Events exporting, filtering and alerting in multi-tenant Kubernetes clusters.
enabled: true
logging: # Whether to install KubeSphere logging system. Flexible logging functions are provided for log query, collection and management in a unified console. Additional log collectors can be added, such as Elasticsearch, Kafka and Fluentd.
enabled: true
logsidecarReplicas: 2
metrics_server: # Whether to install metrics-server. IT enables HPA (Horizontal Pod Autoscaler).
enabled: true
monitoring: #
prometheusReplicas: 1 # Prometheus replicas are responsible for monitoring different segments of data source and provide high availability as well.
prometheusMemoryRequest: 400Mi # Prometheus request memory
prometheusVolumeSize: 20Gi # Prometheus PVC size
alertmanagerReplicas: 1 # AlertManager Replicas
multicluster:
clusterRole: host # host | member | none # You can install a solo cluster, or specify it as the role of host or member cluster
networkpolicy: # Network policies allow network isolation within the same cluster, which means firewalls can be set up between certain instances (Pods).
enabled: true
notification: # It supports notification management in multi-tenant Kubernetes clusters. It allows you to set AlertManager as its sender, and receivers include Email, Wechat Work, and Slack.
enabled: true
openpitrix: # Whether to install KubeSphere Application Store. It provides an application store for Helm-based applications, and offer application lifecycle management
enabled: true
servicemesh: # Whether to install KubeSphere Service Mesh (Istio-based). It provides fine-grained traffic management, observability and tracing, and offer visualization for traffic topology
enabled: true