docker-compose安裝rocketmq

一、單機部署

1、創建目錄：brokerconf

2、創建文件：brokerconf/broker.conf

# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements.  See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The ASF licenses this file to You under the Apache License, Version 2.0
# (the "License"); you may not use this file except in compliance with
# the License.  You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
#  Unless required by applicable law or agreed to in writing, software
#  distributed under the License is distributed on an "AS IS" BASIS,
#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
#  See the License for the specific language governing permissions and
#  limitations under the License.


# 所屬集群名字
brokerClusterName=DefaultCluster

# broker 名字，注意此處不同的配置文件填寫的不一樣，如果在 broker-a.properties 使用: broker-a,
# 在 broker-b.properties 使用: broker-b
brokerName=broker-a

# 0 表示 Master，> 0 表示 Slave
brokerId=0

# nameServer地址，分號分割
# namesrvAddr=rocketmq-nameserver1:9876;rocketmq-nameserver2:9876

# 啟動IP,如果 docker 報 com.alibaba.rocketmq.remoting.exception.RemotingConnectException: connect to <192.168.0.120:10909> failed
# 解決方式1 加上一句 producer.setVipChannelEnabled(false);，解決方式2 brokerIP1 設置宿主機IP，不要使用docker 內部IP  （你自己宿主機的IP，請參考自己）
# brokerIP1=127.0.0.1

# 在發送消息時，自動創建服務器不存在的topic，默認創建的隊列數
defaultTopicQueueNums=4

# 是否允許 Broker 自動創建 Topic，建議線下開啟，線上關閉 ！！！這里仔細看是 false，false，false
autoCreateTopicEnable=true

# 是否允許 Broker 自動創建訂閱組，建議線下開啟，線上關閉
autoCreateSubscriptionGroup=true

# Broker 對外服務的監聽端口
listenPort=10911

# 刪除文件時間點，默認凌晨4點
deleteWhen=04

# 文件保留時間，默認48小時
fileReservedTime=120

# commitLog 每個文件的大小默認1G
mapedFileSizeCommitLog=1073741824

# ConsumeQueue 每個文件默認存 30W 條，根據業務情況調整
mapedFileSizeConsumeQueue=300000

# destroyMapedFileIntervalForcibly=120000
# redeleteHangedFileInterval=120000
# 檢測物理文件磁盤空間
diskMaxUsedSpaceRatio=88
# 存儲路徑
#storePathRootDir=/opt/store
# commitLog 存儲路徑
#storePathCommitLog=/opt/logs/commitlog
# 消費隊列存儲
#storePathConsumeQueue=/opt/store/consumequeue
# 消息索引存儲路徑
#storePathIndex=/opt/store/index
# checkpoint 文件存儲路徑
#storeCheckpoint=/opt/store/checkpoint
# abort 文件存儲路徑
#abortFile=/opt/store/abort
# 限制的消息大小
maxMessageSize=65536

# flushCommitLogLeastPages=4
# flushConsumeQueueLeastPages=2
# flushCommitLogThoroughInterval=10000
# flushConsumeQueueThoroughInterval=60000

# Broker 的角色
# - ASYNC_MASTER 異步復制Master
# - SYNC_MASTER 同步雙寫Master
# - SLAVE
brokerRole=ASYNC_MASTER

# 刷盤方式
# - ASYNC_FLUSH 異步刷盤
# - SYNC_FLUSH 同步刷盤
flushDiskType=ASYNC_FLUSH

# 發消息線程池數量
# sendMessageThreadPoolNums=128
# 拉消息線程池數量
# pullMessageThreadPoolNums=128

PS：以上配置文件的namesrvAddr選項修改成一個，集群配置多個

3、創建docker-compose.yml文件

version: '3.5'
services:
  rmqnamesrv:
    restart: always
    image: foxiswho/rocketmq:server
    container_name: rmqnamesrv
    ports:
      - 9876:9876
    volumes:
      - ./data/logs:/opt/logs
      - ./data/store:/opt/store
    networks:
        rmq:
          aliases:
            - rmqnamesrv
  rmqbroker:
    restart: always
    image: foxiswho/rocketmq:broker
    container_name: rmqbroker
    ports:
      - 10909:10909
      - 10911:10911
    volumes:
      - ./data/logs:/opt/logs
      - ./data/store:/opt/store
      - ./brokerconf/broker.conf:/etc/rocketmq/broker.conf
    environment:
        NAMESRV_ADDR: "rmqnamesrv:9876"
        JAVA_OPTS: " -Duser.home=/opt"
        JAVA_OPT_EXT: "-server -Xms128m -Xmx1024m -Xmn128m"
    command: mqbroker -c /etc/rocketmq/broker.conf
    depends_on:
      - rmqnamesrv
    networks:
      rmq:
        aliases:
          - rmqbroker
  rmqconsole:
    restart: always
    image: styletang/rocketmq-console-ng
    container_name: rmqconsole
    ports:
      - 8080:8080
    environment:
        JAVA_OPTS: "-Drocketmq.namesrv.addr=rmqnamesrv:9876 -Dcom.rocketmq.sendMessageWithVIPChannel=false"
    depends_on:
      - rmqnamesrv
    networks:
      rmq:
        aliases:
          - rmqconsole
networks:
  rmq:
    name: rmq
    driver: bridge

4、docker-compose up -d啟動即可

5、然后訪問8080端口即可進入web頁面

二、集群部署

集群部署與單機部署不同之處是在broker.conf配置文件的不同：

 

參考：

https://www.cnblogs.com/caibao666/p/11579747.html