[S9306-GigabitEthernet2/0/42]dis this
#
interface GigabitEthernet2/0/42 原先的為trunk，
port link-type trunk
port trunk allow-pass vlan 2 to 4094
#
interface GigabitEthernet2/0/42 現在改為access
undo port trunk allow-pass vlan all
port trunk allow-pass vlan 1
port link-type access
port default vlan 10
使用undo port trunk allow-pass vlan all命令時會將默認的Vlan 1也會undo掉，
所以必須再執行一次port trunk allow-pass vlan 1
或者使用下面的命令也可以：
#
interface GigabitEthernet0/0/26 原先的為trunk
port link-type trunk
port trunk allow-pass vlan 2 to 4094
#
undo port trunk allow-pass vlan 2 to 4094 先undo掉2-4094
undo port link-type 再undo掉trunk
port link-type access 設置為access
port default vlan 10 設置默認VLAN