700行代碼, 用python實現一個HTTP客戶端

本文用python在TCP的基礎上實現一個HTTP客戶端, 該客戶端能夠復用TCP連接, 使用HTTP1.1協議. 

一. 創建HTTP請求

　　HTTP是基於TCP連接的, 它的請求報文格式如下:

　　

　　因此, 我們只需要創建一個到服務器的TCP連接, 然后按照上面的格式寫好報文並發給服務器, 就實現了一個HTTP請求.

在2018年發布的HTTP3.0版本中, TCP協議已經被QUIC代替. QUIC全稱為Quick UDP Internet Connect, 是基於UDP實現的.

1. HTTPConnection類

　　基於以上的分析, 我們首先定義一個HTTPConnection類來管理連接和請求內容:

class HTTPConnection:
    default_port = 80
    _http_vsn = 11
    _http_vsn_str = 'HTTP/1.1'

    def __init__(self, host: str, port: int = None) -> None:
        self.sock = None
        self._buffer = []
        self.host = host
        self.port = port if port is not None else self.default_port
        self._state = _CS_IDLE
        self._response = None
        self._method = None
        self.block_size = 8192

    def _output(self, s: Union[str, bytes]) -> None:
        if hasattr(s, 'encode'):
            s = s.encode('latin-1')
        self._buffer.append(s)

    def connect(self) -> None:
        self.sock = socket.create_connection((self.host, self.port))

　　對於這個HTTPConnection對象, 我們只需要創建TCP連接, 然后按照HTTP協議的格式把請求數據寫入buffer中, 最后把buffer中的數據發送出去就行了.

2. 編寫請求行

　　請求行的內容比較簡單, 就是說明請求方法, 請求路徑和HTTP協議. 使用下面的方法來編寫一個請求行:

def put_request(self, method: str, url: str) -> None:
    self._method = method

    url = url or '/'

    request = f'{method} {url} {self._http_vsn_str}'
    self._output(request)

3. 添加請求頭

　　HTTP請求頭和python的字典類似, 每行都是一個字段名與值的映射關系. HTTP協議並不要求設置所有合法的請求頭的值, 我們只需要按照需要, 設置特定的請求頭即可. 使用如下代碼添加請求頭:

def put_header(self, header: Union[bytes, str], value: Union[bytes, str, int]) -> None:
    if hasattr(header, 'encode'):
        header = header.encode('ascii')

    if hasattr(value, 'encode'):
        value = value.encode('latin-1')
    elif isinstance(value, int):
        value = str(value).encode('ascii')

    header = header + b': ' + value
    self._output(header)

　　此外, 在HTTP請求中, Host請求頭字段是必須的, 否則網站可能會拒絕響應. 因此, 如果用戶沒有設置這個字段, 這里就應該主動把它加上去:

def _add_host(self, url: str) -> None:
    # 所有HTTP / 1.1請求報文中必須包含一個Host頭字段
    # 如果用戶沒給,就調用這個函數來生成
    netloc = ''
    if url.startswith('http'):
        nil, netloc, nil, nil, nil = urllib.parse.urlsplit(url)

    if netloc:
        try:
            netloc_enc = netloc.encode('ascii')
        except UnicodeEncodeError:
            netloc_enc = netloc.encode('idna')
        self.put_header('Host', netloc_enc)
    else:
        host = self.host
        port = self.port

        try:
            host_enc = host.encode('ascii')
        except UnicodeEncodeError:
            host_enc = host.encode('idna')

        # 對IPv6的地址進行額外處理
        if host.find(':') >= 0:
            host_enc = b'[' + host_enc + b']'

        if port == self.default_port:
            self.put_header('Host', host_enc)
        else:
            host_enc = host_enc.decode('ascii')
            self.put_header('Host', f'{host_enc}:{port}')

4. 發送請求正文

　　我們接受兩種形式的body數據: 一個基於io.IOBase的可讀文件對象, 或者是一個能通過迭代得到數據的對象. 在傳輸數據之前, 我們首先要確定數據是否采用分塊傳輸:

def request(self, method: str, url: str, headers: dict = None, body: Union[io.IOBase, Iterable] = None,
            encode_chunked: bool = False) -> None:
    ...
    if 'content-length' not in header_names:
        if 'transfer-encoding' not in header_names:
            encode_chunked = False
            content_length = self._get_content_length(body, method)
            if content_length is None:
                if body is not None:
                    # 在這種情況下, body一般是個生成器或者可讀文件之類的東西,應該分塊傳輸
                    encode_chunked = True
                    self.put_header('Transfer-Encoding', 'chunked')
            else:
                self.put_header('Content-Length', str(content_length))
        else:
            # 如果設置了transfer-encoding,則根據用戶給的encode_chunked參數決定是否分塊
            pass
    else:
        # 只要給了content-length,那么一定不是分塊傳輸
        encode_chunked = False
    ...


@staticmethod
def _get_content_length(body: Union[str, bytes, bytearray, Iterable, io.IOBase], method: str) -> Optional[int]:
    if body is None:
        # PUT,POST,PATCH三個方法默認是有body的
        if method.upper() in _METHODS_EXPECTING_BODY:
            return 0
        else:
            return None

    if hasattr(body, 'read'):
        return None

    try:
        # 對於bytes或者bytearray格式的數據,通過memoryview獲取它的長度
        return memoryview(body).nbytes
    except TypeError:
        pass

    if isinstance(body, str):
        return len(body)

    return None

　　 在確定了是否分塊之后, 就可以把正文發出去了. 如果body是一個可讀文件的話, 就調用_read_readable方法把它封裝為一個生成器:

def _send_body(self, message_body: Union[str, bytes, bytearray, Iterable, io.IOBase], encode_chunked: bool) -> None:
    if hasattr(message_body, 'read'):
        chunks = self._read_readable(message_body)
    else:
        try:
            memoryview(message_body)
        except TypeError:
            try:
                chunks = iter(message_body)
            except TypeError:
                raise TypeError(
                    f'message_body should be a bytes-like object or an iterable, got {repr(type(message_body))}')
        else:
            # 如果是字節類型的,通過一次迭代把它發出去
            chunks = (message_body,)

    for chunk in chunks:
        if not chunk:
            continue

        if encode_chunked:
            chunk = f'{len(chunk):X}\r\n'.encode('ascii') + chunk + b'\r\n'
        self.send(chunk)

    if encode_chunked:
        self.send(b'0\r\n\r\n')


def _read_readable(self, readable: io.IOBase) -> Generator[bytes, None, None]:
    need_encode = False
    if isinstance(readable, io.TextIOBase):
        need_encode = True
    while True:
        data_block = readable.read(self.block_size)
        if not data_block:
            break
        if need_encode:
            data_block = data_block.encode('utf-8')
        yield data_block

二. 獲取響應數據

　　HTTP響應報文的格式與請求報文大同小異, 它大致是這樣的:

　　因此, 我們只要用HTTPConnection的socket對象讀取服務器發送的數據, 然后按照上面的格式對數據進行解析就行了.

1. HTTPResponse類

　　我們首先定義一個簡單的HTTPResponse類. 它的屬性大致上就是socket的文件對象以及一些請求的信息等等, 調用它的begin方法來解析響應行和響應頭的數據, 然后調用read方法讀取響應正文:

class HTTPResponse:

    def __init__(self, sock: socket.socket, method: str = None) -> None:
        self.fp = sock.makefile('rb')
        self._method = method
        self.headers = None
        self.version = _UNKNOWN
        self.status = _UNKNOWN
        self.reason = _UNKNOWN
        self.chunked = _UNKNOWN
        self.chunk_left = _UNKNOWN
        self.length = _UNKNOWN
        self.will_close = _UNKNOWN

    def begin(self) -> None:
        ...

    def read(self, amount: int = None) -> bytes:
        ...

2. 解析狀態行

　　狀態行的解析比較簡單, 我們只需要讀取響應的第一行數據, 然后把它解析為HTTP協議版本,狀態碼和原因短語三部分就行了:

def _read_status(self) -> Tuple[str, int, str]:
    line = str(self._read_line(), 'latin-1')
    if not line:
        raise RemoteDisconnected('Remote end closed connection without response')
    try:
        version, status, reason = line.split(None, 2)
    except ValueError:
        # reason只是給人看的, 一般和status對應, 所以它有可能不存在
        try:
            version, status = line.split(None, 1)
            reason = ''
        except ValueError:
            version, status, reason = '', '', ''
    if not version.startswith('HTTP/'):
        self._close_conn()
        raise BadStatusLine(line)

    try:
        status = int(status)
        if status < 100 or status > 999:
            raise BadStatusLine(line)
    except ValueError:
        raise BadStatusLine(line)
    return version, status, reason.strip()

　　如果狀態碼為100, 則客戶端需要解析多個響應狀態行. 它的原理是這樣的: 在請求數據過大的時候, 有的客戶端會先不發送請求數據, 而是先在header中添加一個Expect: 100-continue, 如果服務器願意接收數據, 會返回100的狀態碼, 這時候客戶端再把數據發過去. 因此, 如果讀取到100的狀態碼, 那么后面往往還會收到一個正式的響應數據, 應該繼續讀取響應頭. 這部分的代碼如下:

def begin(self) -> None:
    while True:
        version, status, reason = self._read_status()
        if status != HTTPStatus.CONTINUE:
            break
        # 跳過100狀態碼部分的響應頭
        while True:
            skip = self._read_line().strip()
            if not skip:
                breakself.status = status
    self.reason = reason
    if version in ('HTTP/1.0', 'HTTP/0.9'):
        self.version = 10
    elif version.startswith('HTTP/1.'):
        self.version = 11
    else:
        # HTTP2還沒研究, 這里就不寫了
        raise UnknownProtocol(version)

    ...

3. 解析響應頭

　　解析響應頭比響應行還要簡單. 因為每個header字段占一行, 我們只需要一直調用read_line方法讀取字段, 直到讀完header為止就行了.

def _parse_header(self) -> None:
    headers = {}
    while True:
        line = self._read_line()
        if len(headers) > _MAX_HEADERS:
            raise HTTPException('got more than %d headers' % _MAX_HEADERS)
        if line in _EMPTY_LINE:
            break
        line = line.decode('latin-1')
        i = line.find(':')
        if i == -1:
            raise BadHeaderLine(line)
        # 這里默認沒有重名的情況
        key, value = line[:i].lower(), line[i + 1:].strip()
        headers[key] = value
    self.headers = headers

4. 接收響應正文

　　在接收響應正文之前, 首先要確定它的傳輸方式和長度:

def _set_chunk(self) -> None:
    transfer_encoding = self.get_header('transfer-encoding')
    if transfer_encoding and transfer_encoding.lower() == 'chunked':
        self.chunked = True
        self.chunk_left = None
    else:
        self.chunked = False


def _set_length(self) -> None:
    # 首先要知道數據是否是分塊傳輸的
    if self.chunked == _UNKNOWN:
        self._set_chunk()

    # 如果狀態碼是1xx或者204(無響應內容)或者304(使用上次緩存的內容),則沒有響應正文
    # 如果這是個HEAD請求,那么也不能有響應正文
    if (self.status == HTTPStatus.NO_CONTENT or
            self.status == HTTPStatus.NOT_MODIFIED or
            100 <= self.status < 200 or
            self._method == 'HEAD'):
        self.length = 0
        return

    length = self.get_header('content-length')
    if length and not self.chunked:
        try:
            self.length = int(length)
        except ValueError:
            self.length = None
        else:
            if self.length < 0:
                self.length = None
    else:
        self.length = None

 　　然后, 我們實現一個read方法, 從body中讀取指定大小的數據:

def read(self, amount: int = None) -> bytes:
    if self.is_closed():
        return b''
    if self._method == 'HEAD':
        self.close()
        return b''
    if amount is None:
        return self._read_all()
    return self._read_amount(amount)

　　如果沒有指定需要的數據大小, 就默認讀取所有數據:

def _read_all(self) -> bytes:
    if self.chunked:
        return self._read_all_chunk()
    if self.length is None:
        s = self.fp.read()
    else:
        try:
            s = self._read_bytes(self.length)
        except IncompleteRead:
            self.close()
            raise
        self.length = 0
    self.close()
    return s


def _read_all_chunk(self) -> bytes:
    assert self.chunked != _UNKNOWN
    value = []
    try:
        while True:
            chunk = self._read_chunk()
            if chunk is None:
                break
            value.append(chunk)
        return b''.join(value)
    except IncompleteRead:
        raise IncompleteRead(b''.join(value))


def _read_chunk(self) -> Optional[bytes]:
    try:
        chunk_size = self._read_chunk_size()
    except ValueError:
        raise IncompleteRead(b'')
    if chunk_size == 0:
        self._read_and_discard_trailer()
        self.close()
        return None
    chunk = self._read_bytes(chunk_size)
    # 每塊的結尾會有一個\r\n,這里把它讀掉
    self._read_bytes(2)
    return chunk


def _read_chunk_size(self) -> int:
    line = self._read_line(error_message='chunk size')
    i = line.find(b';')
    if i >= 0:
        line = line[:i]
    try:
        return int(line, 16)
    except ValueError:
        self.close()
        raise


def _read_and_discard_trailer(self) -> None:
    # chunk的尾部可能會掛一些額外的信息,比如MD5值,過期時間等等,一般會在header中用trailer字段說明
    # 當chunk讀完之后調用這個函數, 這些信息就先舍棄掉得了
    while True:
        line = self._read_line(error_message='chunk size')
        if line in _EMPTY_LINE:
            break

　　否則的話, 就讀取部分數據, 如果正好是分塊數據的話, 就比較復雜了. 簡單來說, 就是用bytearray制造一個所需大小的數組, 然后依次讀取chunk把數據往里面填, 直到填滿或者沒數據為止.  然后用chunk_left記錄下當前塊剩余的量, 以便下次讀取.

def _read_amount(self, amount: int) -> bytes:
    if self.chunked:
        return self._read_amount_chunk(amount)
    if isinstance(self.length, int) and amount > self.length:
        amount = self.length
    container = bytearray(amount)
    n = self.fp.readinto(container)
    if not n and container:
        # 如果讀不到字節了,也就可以關了
        self.close()
    elif self.length is not None:
        self.length -= n
        if not self.length:
            self.close()
    return memoryview(container)[:n].tobytes()


def _read_amount_chunk(self, amount: int) -> bytes:
    # 調用這個方法,讀取amount大小的chunk類型數據,不足就全部讀取
    assert self.chunked != _UNKNOWN
    total_bytes = 0
    container = bytearray(amount)
    mvb = memoryview(container)
    try:
        while True:
            # mvb可以理解為容器的空的那一部分
            # 這里一直調用_full_readinto把數據填進去,讓mvb越來越小,同時記錄填入的量
            # 等沒數據或者當前數據足夠把mvb填滿之后,跳出循環
            chunk_left = self._get_chunk_left()
            if chunk_left is None:
                break
            if len(mvb) <= chunk_left:
                n = self._full_readinto(mvb)
                self.chunk_left = chunk_left - n
                total_bytes += n
                break
            temp_mvb = mvb[:chunk_left]
            n = self._full_readinto(temp_mvb)
            mvb = mvb[n:]
            total_bytes += n
            self.chunk_left = 0

    except IncompleteRead:
        raise IncompleteRead(bytes(container[:total_bytes]))

    return memoryview(container)[:total_bytes].tobytes()


def _full_readinto(self, container: memoryview) -> int:
    # 返回讀取的量.如果沒能讀滿,這個方法會報警
    amount = len(container)
    n = self.fp.readinto(container)
    if n < amount:
        raise IncompleteRead(bytes(container[:n]), amount - n)
    return n


def _get_chunk_left(self) -> Optional[int]:
    # 如果當前塊讀了一半,那么直接返回self.chunk_left就行了
    # 否則,有三種情況
    # 1). chunk_left為None,說明body壓根沒開始讀,於是返回當前這一整塊的長度
    # 2). chunk_left為0,說明這塊讀完了,於是返回下一塊的長度
    # 3). body數據讀完了,返回None,順便做好善后工作
    chunk_left = self.chunk_left
    if not chunk_left:
        if chunk_left == 0:
            # 如果剩余零,說明上一塊已經讀完了,這里把\r\n讀掉
            # 如果是None,就說明chunk壓根沒開始讀
            self._read_bytes(2)
        try:
            chunk_left = self._read_chunk_size()
        except ValueError:
            raise IncompleteRead(b'')
        if chunk_left == 0:
            self._read_and_discard_trailer()
            self.close()
            chunk_left = None
        self.chunk_left = chunk_left
    return chunk_left

三. 復用TCP連接

　　HTTP通信本質上是基於TCP連接發送和接收HTTP請求和響應, 因此, 只要TCP連接不斷開, 我們就可以繼續用它進行HTTP請求, 這樣就避免了創建和銷毀TCP連接產生的消耗.

1. 判斷連接是否會斷開

　　在下面幾種情況中, 服務端會自動斷開連接:

• HTTP協議小於1.1且沒有在頭部設置了keep-alive
• HTTP協議大於等於1.1但是在頭部設置了connection: close
• 數據沒有分塊傳輸, 也沒有說明數據的長度, 這種情況下, 服務器一般會在發送完成后斷開連接, 讓客戶端知道數據發完了

　　根據上面列出來的幾種情況, 通過下面的代碼來判斷連接是否會斷開:

def _check_close(self) -> bool:
    conn = self.get_header('connection')

    if not self.chunked and self.length is None:
        return True

    if self.version == 11:
        if conn and 'close' in conn.lower():
            return True
        return False
    else:
        if self.headers.get('keep-alive'):
            return False

        if conn and 'keep-alive' in conn.lower():
            return False

    return True

2. 正確地關閉HTTPResponse對象

　　由於TCP連接的復用, 一個HTTPConnection可以產生多個HTTPResponse對象, 而這些對象在同一個TCP連接上, 會共用這個連接的讀緩沖區. 這就導致, 如果上一個HTTPResponse對象沒有把它的那部分數據讀完, 就會對下一個響應產生影響.

　　另一方面來看, 我們也需要及時地關閉與這個TCP關聯的文件對象來避免占用資源. 因此, 我們定義如下的close方法關閉一個HTTPResponse對象:

def close(self) -> None:
    if self.is_closed():
        return
    fp = self.fp
    self.fp = None
    fp.close()


def is_closed(self) -> bool:
    return self.fp is None

　　用戶調用HTTPResponse對象的read方法, 把緩沖區數據讀完之后, 就會自動調用close方法(具體實現見上一章的第四節: 讀取響應數據這部分). 因此, 在獲取下一個響應數據之前, 我們只需要調用這個對象的is_closed方法, 就能判斷讀緩沖區是否已經讀完, 能否繼續接收響應了.

3. HTTP請求的生命周期

　　不使用管道機制的話, 不同的HTTP請求必須按次序進行, 相互之間不能重疊. 基於這個原因, 我們為HTTPConnection對象設置IDLE, REQ_STARTED和REQ_SENT三種狀態, 一個完整的請求應該經歷這幾種狀態:

　　根據上面的流程, 對HTTPConnection中對應的方法進行修改:

def get_response(self) -> HTTPResponse:
    if self._response and self._response.is_closed():
        self._response = None
    if self._state != _CS_REQ_SENT or self._response:
        raise ResponseNotReady(self._state)

    response = HTTPResponse(self.sock, method=self._method)

    try:
        try:
            response.begin()
        except ConnectionError:
            self.close()
            raise
        assert response.will_close != _UNKNOWN
        self._state = _CS_IDLE

        if response.will_close:
            self.close()
        else:
            self._response = response

        return response
    except Exception as _:
        response.close()
        raise

def put_request(self, method: str, url: str) -> None:
    # 調用這個函數開始新一輪的請求,它負責寫好請求行輸出到緩存里面去
    # 調用它的前提是當前處於空閑狀態
    # 如果之前的response還在並且已結束,會自動把它消除掉
    if self._response and self._response.is_closed():
        self._response = None

    if self._state == _CS_IDLE:
        self._state = _CS_REQ_STARTED
    else:
        raise CannotSendRequest(self._state)

    ...

def put_header(self, header: Union[bytes, str], value: Union[bytes, str, int]) -> None:
    if self._state != _CS_REQ_STARTED:
        raise CannotSendHeader()

    ...

def end_headers(self, message_body=None, encode_chunked=False) -> None:
    if self._state == _CS_REQ_STARTED:
        self._state = _CS_REQ_SENT
    else:
        raise CannotSendHeader()
    ...

　　需要注意的是, 如果第二個請求已經進入到獲取響應的階段了, 而上一個請求的響應還沒關閉, 那么就應該直接報錯, 否則讀取到的會是上一個請求剩余的響應部分數據, 導致解析響應出現問題.

事實上, HTTP1.1開始支持管道化技術, 也就是一次提交多個HTTP請求, 然后等待響應, 而不是在接收到上一個請求的響應后, 才發送后面的請求.
基於這種處理模式, 管道化技術理論上可以減少IO時間的損耗, 提升效率, 不過, 需要服務端的支持, 而且會增加程序的復雜程度, 這里就不實現了.

四. 總結

1. 完整代碼

　　HTTPConnection的完整代碼如下:

class HTTPConnection:
    default_port = 80
    _http_vsn = 11
    _http_vsn_str = 'HTTP/1.1'

    def __init__(self, host: str, port: int = None) -> None:
        self.sock = None
        self._buffer = []
        self.host = host
        self.port = port if port is not None else self.default_port
        self._state = _CS_IDLE
        self._response = None
        self._method = None
        self.block_size = 8192

    def request(self, method: str, url: str, headers: dict = None, body: Union[io.IOBase, Iterable] = None,
                encode_chunked: bool = False) -> None:
        self.put_request(method, url)
        headers = headers or {}
        header_names = frozenset(k.lower() for k in headers.keys())
        if 'host' not in header_names:
            self._add_host(url)

        if 'content-length' not in header_names:
            if 'transfer-encoding' not in header_names:
                encode_chunked = False
                content_length = self._get_content_length(body, method)
                if content_length is None:
                    if body is not None:
                        encode_chunked = True
                        self.put_header('Transfer-Encoding', 'chunked')
                else:
                    self.put_header('Content-Length', str(content_length))
            else:
                # 如果設置了transfer-encoding,則根據用戶給的encode_chunked參數決定是否分塊
                pass
        else:
            # 只要給了content-length,那么一定不是分塊傳輸
            encode_chunked = False

        for hdr, value in headers.items():
            self.put_header(hdr, value)
        if isinstance(body, str):
            body = _encode(body)
        self.end_headers(body, encode_chunked=encode_chunked)

    def send(self, data: bytes) -> None:
        if self.sock is None:
            self.connect()

        self.sock.sendall(data)

    def get_response(self) -> HTTPResponse:
        if self._response and self._response.is_closed():
            self._response = None
        if self._state != _CS_REQ_SENT or self._response:
            raise ResponseNotReady(self._state)

        response = HTTPResponse(self.sock, method=self._method)

        try:
            try:
                response.begin()
            except ConnectionError:
                self.close()
                raise
            assert response.will_close != _UNKNOWN
            self._state = _CS_IDLE

            if response.will_close:
                self.close()
            else:
                self._response = response

            return response
        except Exception as _:
            response.close()
            raise

    def connect(self) -> None:
        self.sock = socket.create_connection((self.host, self.port))

    def close(self) -> None:
        self._state = _CS_IDLE
        try:
            sock = self.sock
            if sock:
                self.sock = None
                sock.close()
        finally:
            response = self._response
            if response:
                self._response = None
                response.close()

    def put_request(self, method: str, url: str) -> None:
        # 調用這個函數開始新一輪的請求,它負責寫好請求行輸出到緩存里面去
        # 調用它的前提是當前處於空閑狀態
        # 如果之前的response還在並且已結束,會自動把它消除掉
        if self._response and self._response.is_closed():
            self._response = None

        if self._state == _CS_IDLE:
            self._state = _CS_REQ_STARTED
        else:
            raise CannotSendRequest(self._state)

        self._method = method

        url = url or '/'

        request = f'{method} {url} {self._http_vsn_str}'
        self._output(request)

    def put_header(self, header: Union[bytes, str], value: Union[bytes, str, int]) -> None:
        if self._state != _CS_REQ_STARTED:
            raise CannotSendHeader()

        if hasattr(header, 'encode'):
            header = header.encode('ascii')

        if hasattr(value, 'encode'):
            value = value.encode('latin-1')
        elif isinstance(value, int):
            value = str(value).encode('ascii')

        header = header + b': ' + value
        self._output(header)

    def end_headers(self, message_body=None, encode_chunked=False) -> None:
        if self._state == _CS_REQ_STARTED:
            self._state = _CS_REQ_SENT
        else:
            raise CannotSendHeader()
        self._send_output(message_body, encode_chunked=encode_chunked)

    def _add_host(self, url: str) -> None:
        # 所有HTTP / 1.1請求報文中必須包含一個Host頭字段
        # 如果用戶沒給,就調用這個函數來生成
        netloc = ''
        if url.startswith('http'):
            nil, netloc, nil, nil, nil = urlsplit(url)

        if netloc:
            try:
                netloc_enc = netloc.encode('ascii')
            except UnicodeEncodeError:
                netloc_enc = netloc.encode('idna')
            self.put_header('Host', netloc_enc)
        else:
            host = self.host
            port = self.port

            try:
                host_enc = host.encode('ascii')
            except UnicodeEncodeError:
                host_enc = host.encode('idna')

            # 對IPv6的地址進行額外處理
            if host.find(':') >= 0:
                host_enc = b'[' + host_enc + b']'

            if port == self.default_port:
                self.put_header('Host', host_enc)
            else:
                host_enc = host_enc.decode('ascii')
                self.put_header('Host', f'{host_enc}:{port}')

    def _output(self, s: Union[str, bytes]) -> None:
        # 將數據添加到緩沖區
        if hasattr(s, 'encode'):
            s = s.encode('latin-1')
        self._buffer.append(s)

    def _send_output(self, message_body=None, encode_chunked=False) -> None:
        # 發送並清空緩沖數據.然后,如果有請求正文,就也順便發送

        self._buffer.extend((b'', b''))
        msg = b'\r\n'.join(self._buffer)
        self._buffer.clear()
        self.send(msg)

        if message_body is not None:
            self._send_body(message_body, encode_chunked)

    def _send_body(self, message_body: Union[bytes, str, bytearray, Iterable, io.IOBase], encode_chunked: bool) -> None:
        if hasattr(message_body, 'read'):
            chunks = self._read_readable(message_body)
        else:
            try:
                memoryview(message_body)
            except TypeError:
                try:
                    chunks = iter(message_body)
                except TypeError:
                    raise TypeError(
                        f'message_body should be a bytes-like object or an iterable, got {repr(type(message_body))}')
            else:
                # 如果是字節類型的,通過一次迭代把它發出去
                chunks = (message_body,)

        for chunk in chunks:
            if not chunk:
                continue

            if encode_chunked:
                chunk = f'{len(chunk):X}\r\n'.encode('ascii') + chunk + b'\r\n'
            self.send(chunk)

        if encode_chunked:
            self.send(b'0\r\n\r\n')

    def _read_readable(self, readable: io.IOBase) -> Generator[bytes, None, None]:
        need_encode = False
        if isinstance(readable, io.TextIOBase):
            need_encode = True
        while True:
            data_block = readable.read(self.block_size)
            if not data_block:
                break
            if need_encode:
                data_block = data_block.encode('utf-8')
            yield data_block

    @staticmethod
    def _get_content_length(body: Union[str, bytes, bytearray, Iterable, io.IOBase], method: str) -> Optional[int]:
        if body is None:
            # PUT,POST,PATCH三個方法默認是有body的
            if method.upper() in _METHODS_EXPECTING_BODY:
                return 0
            else:
                return None

        if hasattr(body, 'read'):
            return None

        try:
            # 對於bytes或者bytearray格式的數據,通過memoryview獲取它的長度
            return memoryview(body).nbytes
        except TypeError:
            pass

        if isinstance(body, str):
            return len(body)

        return None

　　HTTPResponse的完整代碼如下:

class HTTPResponse:

    def __init__(self, sock: socket.socket, method: str = None) -> None:
        self.fp = sock.makefile('rb')
        self._method = method
        self.headers = None
        self.version = _UNKNOWN
        self.status = _UNKNOWN
        self.reason = _UNKNOWN
        self.chunked = _UNKNOWN
        self.chunk_left = _UNKNOWN
        self.length = _UNKNOWN
        self.will_close = _UNKNOWN

    def begin(self) -> None:
        if self.headers is not None:
            return
        self._parse_status_line()
        self._parse_header()
        self._set_chunk()
        self._set_length()
        self.will_close = self._check_close()

    def _read_line(self, limit: int = _MAX_LINE + 1, error_message: str = '') -> bytes:
        # 注意,這個方法默認不去除line尾部的\r\n
        line = self.fp.readline(limit)
        if len(line) > _MAX_LINE:
            raise LineTooLong(error_message)
        return line

    def _read_bytes(self, amount: int) -> bytes:
        data = self.fp.read(amount)
        if len(data) < amount:
            raise IncompleteRead(data, amount - len(data))
        return data

    def _parse_status_line(self) -> None:
        while True:
            version, status, reason = self._read_status()
            if status != HTTPStatus.CONTINUE:
                break
            while True:
                skip = self._read_line(error_message='header line').strip()
                if not skip:
                    break

        self.status = status
        self.reason = reason
        if version in ('HTTP/1.0', 'HTTP/0.9'):
            self.version = 10
        elif version.startswith('HTTP/1.'):
            self.version = 11
        else:
            raise UnknownProtocol(version)

    def _read_status(self) -> Tuple[str, int, str]:
        line = str(self._read_line(error_message='status line'), 'latin-1')
        if not line:
            raise RemoteDisconnected('Remote end closed connection without response')
        try:
            version, status, reason = line.split(None, 2)
        except ValueError:
            # reason只是給人看的, 和status對應, 所以它有可能不存在
            try:
                version, status = line.split(None, 1)
                reason = ''
            except ValueError:
                version, status, reason = '', '', ''
        if not version.startswith('HTTP/'):
            self.close()
            raise BadStatusLine(line)

        try:
            status = int(status)
            if status < 100 or status > 999:
                raise BadStatusLine(line)
        except ValueError:
            raise BadStatusLine(line)
        return version, status, reason.strip()

    def _parse_header(self) -> None:
        headers = {}
        while True:
            line = self._read_line(error_message='header line')
            if len(headers) > _MAX_HEADERS:
                raise HTTPException('got more than %d headers' % _MAX_HEADERS)
            if line in _EMPTY_LINE:
                break
            line = line.decode('latin-1')
            i = line.find(':')
            if i == -1:
                raise BadHeaderLine(line)
            # 這里默認沒有重名的情況
            key, value = line[:i].lower(), line[i + 1:].strip()
            headers[key] = value
        self.headers = headers

    def _set_chunk(self) -> None:
        transfer_encoding = self.get_header('transfer-encoding')
        if transfer_encoding and transfer_encoding.lower() == 'chunked':
            self.chunked = True
            self.chunk_left = None
        else:
            self.chunked = False

    def _set_length(self) -> None:
        # 首先要知道數據是否是分塊傳輸的
        if self.chunked == _UNKNOWN:
            self._set_chunk()

        # 如果狀態碼是1xx或者204(無響應內容)或者304(使用上次緩存的內容),則沒有響應正文
        # 如果這是個HEAD請求,那么也不能有響應正文
        assert isinstance(self.status, int)
        if (self.status == HTTPStatus.NO_CONTENT or
                self.status == HTTPStatus.NOT_MODIFIED or
                100 <= self.status < 200 or
                self._method == 'HEAD'):
            self.length = 0
            return

        length = self.get_header('content-length')
        if length and not self.chunked:
            try:
                self.length = int(length)
            except ValueError:
                self.length = None
            else:
                if self.length < 0:
                    self.length = None
        else:
            self.length = None

    def _check_close(self) -> bool:
        conn = self.get_header('connection')

        if not self.chunked and self.length is None:
            return True

        if self.version == 11:
            if conn and 'close' in conn.lower():
                return True
            return False
        else:
            if self.headers.get('keep-alive'):
                return False

            if conn and 'keep-alive' in conn.lower():
                return False

        return True

    def close(self) -> None:
        if self.is_closed():
            return
        fp = self.fp
        self.fp = None
        fp.close()

    def is_closed(self) -> bool:
        return self.fp is None

    def read(self, amount: int = None) -> bytes:
        if self.is_closed():
            return b''
        if self._method == 'HEAD':
            self.close()
            return b''
        if amount is None:
            return self._read_all()
        print(amount, amount is None)
        return self._read_amount(amount)

    def _read_all(self) -> bytes:
        if self.chunked:
            return self._read_all_chunk()
        if self.length is None:
            s = self.fp.read()
        else:
            try:
                s = self._read_bytes(self.length)
            except IncompleteRead:
                self.close()
                raise
            self.length = 0
        self.close()
        return s

    def _read_all_chunk(self) -> bytes:
        assert self.chunked != _UNKNOWN
        value = []
        try:
            while True:
                chunk = self._read_chunk()
                if chunk is None:
                    break
                value.append(chunk)
            return b''.join(value)
        except IncompleteRead:
            raise IncompleteRead(b''.join(value))

    def _read_chunk(self) -> Optional[bytes]:
        try:
            chunk_size = self._read_chunk_size()
        except ValueError:
            raise IncompleteRead(b'')
        if chunk_size == 0:
            self._read_and_discard_trailer()
            self.close()
            return None
        chunk = self._read_bytes(chunk_size)
        # 每塊的結尾會有一個\r\n,這里把它讀掉
        self._read_bytes(2)
        return chunk

    def _read_chunk_size(self) -> int:
        line = self._read_line(error_message='chunk size')
        i = line.find(b';')
        if i >= 0:
            line = line[:i]
        try:
            return int(line, 16)
        except ValueError:
            self.close()
            raise

    def _read_and_discard_trailer(self) -> None:
        # chunk的尾部可能會掛一些額外的信息,比如MD5值,過期時間等等,一般會在header中用trailer字段說明
        # 當chunk讀完之后調用這個函數, 這些信息就先舍棄掉得了
        while True:
            line = self._read_line(error_message='chunk size')
            if line in _EMPTY_LINE:
                break

    def _read_amount(self, amount: int) -> bytes:
        if self.chunked:
            return self._read_amount_chunk(amount)
        if isinstance(self.length, int) and amount > self.length:
            amount = self.length
        container = bytearray(amount)
        n = self.fp.readinto(container)
        if not n and container:
            # 如果讀不到字節了,也就可以關了
            self.close()
        elif self.length is not None:
            self.length -= n
            if not self.length:
                self.close()
        return memoryview(container)[:n].tobytes()

    def _read_amount_chunk(self, amount: int) -> bytes:
        # 調用這個方法,讀取amount大小的chunk類型數據,不足就全部讀取
        assert self.chunked != _UNKNOWN
        total_bytes = 0
        container = bytearray(amount)
        mvb = memoryview(container)
        try:
            while True:
                # mvb可以理解為容器的空的那一部分
                # 這里一直調用_full_readinto把數據填進去,讓mvb越來越小,同時記錄填入的量
                # 等沒數據或者當前數據足夠把mvb填滿之后,跳出循環
                chunk_left = self._get_chunk_left()
                if chunk_left is None:
                    break
                if len(mvb) <= chunk_left:
                    n = self._full_readinto(mvb)
                    self.chunk_left = chunk_left - n
                    total_bytes += n
                    break
                temp_mvb = mvb[:chunk_left]
                n = self._full_readinto(temp_mvb)
                mvb = mvb[n:]
                total_bytes += n
                self.chunk_left = 0

        except IncompleteRead:
            raise IncompleteRead(bytes(container[:total_bytes]))

        return memoryview(container)[:total_bytes].tobytes()

    def _full_readinto(self, container: memoryview) -> int:
        # 返回讀取的量.如果沒能讀滿,這個方法會報警
        amount = len(container)
        n = self.fp.readinto(container)
        if n < amount:
            raise IncompleteRead(bytes(container[:n]), amount - n)
        return n

    def _get_chunk_left(self) -> Optional[int]:
        # 如果當前塊讀了一半,那么直接返回self.chunk_left就行了
        # 否則,有三種情況
        # 1). chunk_left為None,說明body壓根沒開始讀,於是返回當前這一整塊的長度
        # 2). chunk_left為0,說明這塊讀完了,於是返回下一塊的長度
        # 3). body數據讀完了,返回None,順便做好善后工作
        chunk_left = self.chunk_left
        if not chunk_left:
            if chunk_left == 0:
                # 如果剩余零,說明上一塊已經讀完了,這里把\r\n讀掉
                # 如果是None,就說明chunk壓根沒開始讀
                self._read_bytes(2)
            try:
                chunk_left = self._read_chunk_size()
            except ValueError:
                raise IncompleteRead(b'')
            if chunk_left == 0:
                self._read_and_discard_trailer()
                self.close()
                chunk_left = None
            self.chunk_left = chunk_left
        return chunk_left

    def get_header(self, name, default: str = None) -> Optional[str]:
        if self.headers is None:
            raise ResponseNotReady()
        return self.headers.get(name, default)

    @property
    def info(self) -> str:
        return repr(self.headers)

　　這兩個類應該放到同一個py文件中, 同時這個文件內還有其他一些輔助性質的代碼:

import io
import socket
from typing import Generator, Iterable, Optional, Tuple, Union
from urllib.parse import urlsplit

_CS_IDLE = 'Idle'
_CS_REQ_STARTED = 'Request-started'
_CS_REQ_SENT = 'Request-sent'

_METHODS_EXPECTING_BODY = {'PATCH', 'POST', 'PUT'}
_UNKNOWN = 'UNKNOWN'

_MAX_LINE = 65536
_MAX_HEADERS = 100

_EMPTY_LINE = (b'\r\n', b'\n', b'')


class HTTPStatus:
    CONTINUE = 100
    SWITCHING_PROTOCOLS = 101
    PROCESSING = 102
    OK = 200
    CREATED = 201
    ACCEPTED = 202
    NON_AUTHORITATIVE_INFORMATION = 203
    NO_CONTENT = 204
    RESET_CONTENT = 205
    PARTIAL_CONTENT = 206
    MULTI_STATUS = 207
    ALREADY_REPORTED = 208
    IM_USED = 226
    MULTIPLE_CHOICES = 300
    MOVED_PERMANENTLY = 301
    FOUND = 302
    SEE_OTHER = 303
    NOT_MODIFIED = 304
    USE_PROXY = 305
    TEMPORARY_REDIRECT = 307
    PERMANENT_REDIRECT = 308
    BAD_REQUEST = 400
    UNAUTHORIZED = 401
    PAYMENT_REQUIRED = 402
    FORBIDDEN = 403
    NOT_FOUND = 404
    METHOD_NOT_ALLOWED = 405
    NOT_ACCEPTABLE = 406
    PROXY_AUTHENTICATION_REQUIRED = 407
    REQUEST_TIMEOUT = 408
    CONFLICT = 409
    GONE = 410
    LENGTH_REQUIRED = 411
    PRECONDITION_FAILED = 412
    REQUEST_ENTITY_TOO_LARGE = 413
    REQUEST_URI_TOO_LONG = 414
    UNSUPPORTED_MEDIA_TYPE = 415
    REQUESTED_RANGE_NOT_SATISFIABLE = 416
    EXPECTATION_FAILED = 417
    MISDIRECTED_REQUEST = 421
    UNPROCESSABLE_ENTITY = 422
    LOCKED = 423
    FAILED_DEPENDENCY = 424
    UPGRADE_REQUIRED = 426
    PRECONDITION_REQUIRED = 428
    TOO_MANY_REQUESTS = 429
    REQUEST_HEADER_FIELDS_TOO_LARGE = 431
    UNAVAILABLE_FOR_LEGAL_REASONS = 451
    INTERNAL_SERVER_ERROR = 500
    NOT_IMPLEMENTED = 501
    BAD_GATEWAY = 502
    SERVICE_UNAVAILABLE = 503
    GATEWAY_TIMEOUT = 504
    HTTP_VERSION_NOT_SUPPORTED = 505
    VARIANT_ALSO_NEGOTIATES = 506
    INSUFFICIENT_STORAGE = 507
    LOOP_DETECTED = 508
    NOT_EXTENDED = 510
    NETWORK_AUTHENTICATION_REQUIRED = 511


class HTTPResponse:
    ...


class HTTPConnection:
    ...


def _encode(data: str, encoding: str = 'latin-1', name: str = 'data') -> bytes:
    # 給請求正文等不知道能怎么轉碼的東西轉碼時用這個,默認使用latin-1編碼
    # 它的好處是,轉碼失敗后能拋出詳細的錯誤信息,一目了然
    try:
        return data.encode(encoding)
    except UnicodeEncodeError as err:
        raise UnicodeEncodeError(
            err.encoding,
            err.object,
            err.start,
            err.end,
            "{} ({:.20!r}) is not valid {}. Use {}.encode('utf-8') if you want to send it encoded in UTF-8.".format(
                name.title(), data[err.start:err.end], encoding, name)
        ) from None


class HTTPException(Exception):
    pass


class ImproperConnectionState(HTTPException):
    pass


class CannotSendRequest(ImproperConnectionState):
    pass


class CannotSendHeader(ImproperConnectionState):
    pass


class CannotCloseStream(ImproperConnectionState):
    pass


class ResponseNotReady(ImproperConnectionState):
    pass


class LineTooLong(HTTPException):
    def __init__(self, line_type):
        HTTPException.__init__(self, 'got more than %d bytes when reading %s'
                               % (_MAX_LINE, line_type))


class BadStatusLine(HTTPException):
    def __init__(self, line):
        if not line:
            line = repr(line)
        self.args = line,
        self.line = line


class BadHeaderLine(HTTPException):
    def __init__(self, line):
        if not line:
            line = repr(line)
        self.args = line,
        self.line = line


class RemoteDisconnected(ConnectionResetError, BadStatusLine):
    def __init__(self, *args, **kwargs):
        BadStatusLine.__init__(self, '')
        ConnectionResetError.__init__(self, *args, **kwargs)


class UnknownProtocol(HTTPException):
    def __init__(self, version):
        self.args = version,
        self.version = version


class UnknownTransferEncoding(HTTPException):
    pass


class IncompleteRead(HTTPException):
    def __init__(self, partial, expected=None):
        self.args = partial,
        self.partial = partial
        self.expected = expected

    def __repr__(self):
        if self.expected is not None:
            e = f', {self.expected} more expected'
        else:
            e = ''
        return f'{self.__class__.__name__}({len(self.partial)} bytes read{e})'

    __str__ = object.__str__

2. 需要注意的點

　　總的來說, 本文的內容不算復雜, 畢竟HTTP屬於不難理解, 但知識點很多很雜的類型. 這里把本文中一些需要注意的點總結一下:

• 請求和響應數據的結構大致相同, 都是狀態行+頭部+正文, 狀態行和頭部的每個字段都用一個\r\n分割, 與正文之間用兩個分割;
• 狀態行是必須的, 請求頭則最少需要host這個字段, 同時為了大家的方便, 你最好也設置一下Accept-encoding和Accept來限制服務器返回給你的數據內容和格式;
• 正文不是必須的, 特別是對於除了3P(PATCH, POST, PUT)之外的方法來說. 如果你有正文, 你最好在header中使用Content-Length說明正文的長度, 如果是分塊發送, 則使用Transfer-Encoding字段說明;
• 如果對正文使用分塊傳輸, 每塊的格式是: 16進制的數據長度+\r\n+數據+\r\n, 使用0\r\n\r\n來收尾. 收尾之后, 你還可以放一個trailer, 里面放數據的MD5值或者過期時間什么的, 這時候最好在header中設置trailer字段;
• 在一個請求的生命周期完成后, TCP連接是否會斷開取決於三點: 響應數據的HTTP版本, 響應頭中的Connection和Keep-Alive字段, 是否知道響應正文的長度;
• 最最重要的一點, HTTP協議只是一個約定而非限制, 這就和礦泉水的建議零售價差不多, 你可以選擇遵守, 也可以不遵守, 后果自負. 

3. 結果測試

　　首先, 我們用tornado寫一個簡單的服務器, 它會顯示客戶端的地址和接口;

import tornado.web
import tornado.ioloop

class IndexHandler(tornado.web.RequestHandler):

    def get(self) -> None:
        print(f'new connection from {self.request.connection.context.address}')
        self.write('hello world')


app = tornado.web.Application([(r'/', IndexHandler)])
app.listen(8888)
tornado.ioloop.IOLoop.current().start()

　　然后, 使用我們剛寫好的客戶端進行測試:

from client import HTTPConnection


def fetch(conn: HTTPConnection, url: str = '') -> None:
    conn.request('GET', url)
    res = conn.get_response()
    print(res.read())


connection = HTTPConnection('127.0.0.1', 8888)
for i in range(10):
    fetch(connection)

　　結果如下: