1. 預備環境准備
請確保是在環境中安裝使用:
- 64 bit OS Linux/Unix/Mac，推薦使用Linux系統。
- 64 bit JDK 1.8+；下載.配置。
- Maven 3.2.x+；下載.配置。
- 3個或3個以上Nacos節點才能構成集群。
上述是naco官網要求（https://nacos.io/zh-cn/docs/cluster-mode-quick-start.html），本次安裝以CentOS7為例
2.Nginx安裝及配置
# 安裝rz工具，將windows中的文件拷貝給linux [root@localhost ~]# yum -y install lrzsz # 准備目錄 [root@localhost ~]# mkdir /usr/local/nginx [root@localhost ~]# cd /usr/local/nginx/ # 解壓nginx [root@localhost ~]# tar -zxvf nginx-1.10.2.tar.gz #解壓完畢后，移至目錄 [root@localhost ~] # cd nginx-1.10.2 #設置nginx安裝路徑，如果不設置，默認為/usr/local/nginx [root@localhost nginx-1.10.2]# ./configure --prefix=/usr/local/nginx # 運行結果 checking for OS + Linux 3.10.0-1127.13.1.el7.x86_64 x86_64 checking for C compiler ... found + using GNU C compiler + gcc version: 4.8.5 20150623 (Red Hat 4.8.5-39) (GCC) checking for gcc -pipe switch ... found checking for -Wl,-E switch ... found checking for gcc builtin atomic operations ... found checking for C99 variadic macros ... found checking for gcc variadic macros ... found checking for gcc builtin 64 bit byteswap ... found checking for unistd.h ... found checking for inttypes.h ... found checking for limits.h ... found checking for sys/filio.h ... not found checking for sys/param.h ... found checking for sys/mount.h ... found checking for sys/statvfs.h ... found checking for crypt.h ... found checking for Linux specific features checking for epoll ... found checking for EPOLLRDHUP ... found checking for O_PATH ... found checking for sendfile() ... found checking for sendfile64() ... found checking for sys/prctl.h ... found checking for prctl(PR_SET_DUMPABLE) ... found checking for sched_setaffinity() ... found checking for crypt_r() ... found checking for sys/vfs.h ... found checking for nobody group ... found checking for poll() ... found checking for /dev/poll ... not found checking for kqueue ... not found checking for crypt() ... not found checking for crypt() in libcrypt ... found checking for F_READAHEAD ... not found checking for posix_fadvise() ... found checking for O_DIRECT ... found checking for F_NOCACHE ... not found checking for directio() ... not found checking for statfs() ... found checking for statvfs() ... found checking for dlopen() ... not found checking for dlopen() in libdl ... found checking for sched_yield() ... found checking for SO_SETFIB ... not found checking for SO_REUSEPORT ... found checking for SO_ACCEPTFILTER ... not found checking for IP_RECVDSTADDR ... not found checking for IP_PKTINFO ... found checking for IPV6_RECVPKTINFO ... found checking for TCP_DEFER_ACCEPT ... found checking for TCP_KEEPIDLE ... found checking for TCP_FASTOPEN ... found checking for TCP_INFO ... found checking for accept4() ... found checking for eventfd() ... found checking for int size ... 4 bytes checking for long size ... 8 bytes checking for long long size ... 8 bytes checking for void * size ... 8 bytes checking for uint32_t ... found checking for uint64_t ... found checking for sig_atomic_t ... found checking for sig_atomic_t size ... 4 bytes checking for socklen_t ... found checking for in_addr_t ... found checking for in_port_t ... found checking for rlim_t ... found checking for uintptr_t ... uintptr_t found checking for system byte ordering ... little endian checking for size_t size ... 8 bytes checking for off_t size ... 8 bytes checking for time_t size ... 8 bytes checking for setproctitle() ... not found checking for pread() ... found checking for pwrite() ... found checking for pwritev() ... found checking for sys_nerr ... found checking for localtime_r() ... found checking for posix_memalign() ... found checking for memalign() ... found checking for mmap(MAP_ANON|MAP_SHARED) ... found checking for mmap("/dev/zero", MAP_SHARED) ... found checking for System V shared memory ... found checking for POSIX semaphores ... not found checking for POSIX semaphores in libpthread ... found checking for struct msghdr.msg_control ... found checking for ioctl(FIONBIO) ... found checking for struct tm.tm_gmtoff ... found checking for struct dirent.d_namlen ... not found checking for struct dirent.d_type ... found checking for sysconf(_SC_NPROCESSORS_ONLN) ... found checking for openat(), fstatat() ... found checking for getaddrinfo() ... found checking for PCRE library ... found checking for PCRE JIT support ... found checking for md5 in system md library ... not found checking for md5 in system md5 library ... not found checking for md5 in system OpenSSL crypto library ... found checking for sha1 in system md library ... not found checking for sha1 in system OpenSSL crypto library ... found checking for zlib library ... found creating objs/Makefile Configuration summary + using system PCRE library + OpenSSL library is not used + md5: using system crypto library + sha1: using system crypto library + using system zlib library nginx path prefix: "/usr/local/nginx" nginx binary file: "/usr/local/nginx/sbin/nginx" nginx modules path: "/usr/local/nginx/modules" nginx configuration prefix: "/usr/local/nginx/conf" nginx configuration file: "/usr/local/nginx/conf/nginx.conf" nginx pid file: "/usr/local/nginx/logs/nginx.pid" nginx error log file: "/usr/local/nginx/logs/error.log" nginx http access log file: "/usr/local/nginx/logs/access.log" nginx http client request body temporary files: "client_body_temp" nginx http proxy temporary files: "proxy_temp" nginx http fastcgi temporary files: "fastcgi_temp" nginx http uwsgi temporary files: "uwsgi_temp" nginx http scgi temporary files: "scgi_temp" # 如果上邊報錯，遇紅，則執行下面這行命令，再次執行上邊的命令即可。 [root@localhost nginx-1.10.2] # yum -y install gcc gcc-c++ autoconf automake make #如果還報錯，再執行這條命令 [root@localhost nginx-1.10.2] # yum -y install openssl openssl-devel # 編譯 make （make的過程是把各種語言寫的源碼文件，變成可執行文件和各種庫文件） [root@localhost nginx-1.10.2]# make
make執行結果
1 make -f objs/Makefile 2 make[1]: Entering directory `/root/nginx-1.10.2' 3 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs \ 4 -o objs/src/core/nginx.o \ 5 src/core/nginx.c 6 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs \ 7 -o objs/src/core/ngx_log.o \ 8 src/core/ngx_log.c 9 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs \ 10 -o objs/src/core/ngx_palloc.o \ 11 src/core/ngx_palloc.c 12 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs \ 13 -o objs/src/core/ngx_array.o \ 14 src/core/ngx_array.c 15 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs \ 16 -o objs/src/core/ngx_list.o \ 17 src/core/ngx_list.c 18 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs \ 19 -o objs/src/core/ngx_hash.o \ 20 src/core/ngx_hash.c 21 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs \ 22 -o objs/src/core/ngx_buf.o \ 23 src/core/ngx_buf.c 24 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs \ 25 -o objs/src/core/ngx_queue.o \ 26 src/core/ngx_queue.c 27 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs \ 28 -o objs/src/core/ngx_output_chain.o \ 29 src/core/ngx_output_chain.c 30 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs \ 31 -o objs/src/core/ngx_string.o \ 32 src/core/ngx_string.c 33 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs \ 34 -o objs/src/core/ngx_parse.o \ 35 src/core/ngx_parse.c 36 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs \ 37 -o objs/src/core/ngx_parse_time.o \ 38 src/core/ngx_parse_time.c 39 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs \ 40 -o objs/src/core/ngx_inet.o \ 41 src/core/ngx_inet.c 42 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs \ 43 -o objs/src/core/ngx_file.o \ 44 src/core/ngx_file.c 45 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs \ 46 -o objs/src/core/ngx_crc32.o \ 47 src/core/ngx_crc32.c 48 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs \ 49 -o objs/src/core/ngx_murmurhash.o \ 50 src/core/ngx_murmurhash.c 51 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs \ 52 -o objs/src/core/ngx_md5.o \ 53 src/core/ngx_md5.c 54 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs \ 55 -o objs/src/core/ngx_rbtree.o \ 56 src/core/ngx_rbtree.c 57 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs \ 58 -o objs/src/core/ngx_radix_tree.o \ 59 src/core/ngx_radix_tree.c 60 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs \ 61 -o objs/src/core/ngx_slab.o \ 62 src/core/ngx_slab.c 63 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs \ 64 -o objs/src/core/ngx_times.o \ 65 src/core/ngx_times.c 66 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs \ 67 -o objs/src/core/ngx_shmtx.o \ 68 src/core/ngx_shmtx.c 69 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs \ 70 -o objs/src/core/ngx_connection.o \ 71 src/core/ngx_connection.c 72 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs \ 73 -o objs/src/core/ngx_cycle.o \ 74 src/core/ngx_cycle.c 75 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs \ 76 -o objs/src/core/ngx_spinlock.o \ 77 src/core/ngx_spinlock.c 78 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs \ 79 -o objs/src/core/ngx_rwlock.o \ 80 src/core/ngx_rwlock.c 81 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs \ 82 -o objs/src/core/ngx_cpuinfo.o \ 83 src/core/ngx_cpuinfo.c 84 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs \ 85 -o objs/src/core/ngx_conf_file.o \ 86 src/core/ngx_conf_file.c 87 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs \ 88 -o objs/src/core/ngx_module.o \ 89 src/core/ngx_module.c 90 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs \ 91 -o objs/src/core/ngx_resolver.o \ 92 src/core/ngx_resolver.c 93 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs \ 94 -o objs/src/core/ngx_open_file_cache.o \ 95 src/core/ngx_open_file_cache.c 96 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs \ 97 -o objs/src/core/ngx_crypt.o \ 98 src/core/ngx_crypt.c 99 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs \ 100 -o objs/src/core/ngx_proxy_protocol.o \ 101 src/core/ngx_proxy_protocol.c 102 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs \ 103 -o objs/src/core/ngx_syslog.o \ 104 src/core/ngx_syslog.c 105 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs \ 106 -o objs/src/event/ngx_event.o \ 107 src/event/ngx_event.c 108 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs \ 109 -o objs/src/event/ngx_event_timer.o \ 110 src/event/ngx_event_timer.c 111 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs \ 112 -o objs/src/event/ngx_event_posted.o \ 113 src/event/ngx_event_posted.c 114 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs \ 115 -o objs/src/event/ngx_event_accept.o \ 116 src/event/ngx_event_accept.c 117 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs \ 118 -o objs/src/event/ngx_event_connect.o \ 119 src/event/ngx_event_connect.c 120 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs \ 121 -o objs/src/event/ngx_event_pipe.o \ 122 src/event/ngx_event_pipe.c 123 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs \ 124 -o objs/src/os/unix/ngx_time.o \ 125 src/os/unix/ngx_time.c 126 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs \ 127 -o objs/src/os/unix/ngx_errno.o \ 128 src/os/unix/ngx_errno.c 129 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs \ 130 -o objs/src/os/unix/ngx_alloc.o \ 131 src/os/unix/ngx_alloc.c 132 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs \ 133 -o objs/src/os/unix/ngx_files.o \ 134 src/os/unix/ngx_files.c 135 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs \ 136 -o objs/src/os/unix/ngx_socket.o \ 137 src/os/unix/ngx_socket.c 138 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs \ 139 -o objs/src/os/unix/ngx_recv.o \ 140 src/os/unix/ngx_recv.c 141 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs \ 142 -o objs/src/os/unix/ngx_readv_chain.o \ 143 src/os/unix/ngx_readv_chain.c 144 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs \ 145 -o objs/src/os/unix/ngx_udp_recv.o \ 146 src/os/unix/ngx_udp_recv.c 147 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs \ 148 -o objs/src/os/unix/ngx_send.o \ 149 src/os/unix/ngx_send.c 150 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs \ 151 -o objs/src/os/unix/ngx_writev_chain.o \ 152 src/os/unix/ngx_writev_chain.c 153 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs \ 154 -o objs/src/os/unix/ngx_udp_send.o \ 155 src/os/unix/ngx_udp_send.c 156 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs \ 157 -o objs/src/os/unix/ngx_channel.o \ 158 src/os/unix/ngx_channel.c 159 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs \ 160 -o objs/src/os/unix/ngx_shmem.o \ 161 src/os/unix/ngx_shmem.c 162 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs \ 163 -o objs/src/os/unix/ngx_process.o \ 164 src/os/unix/ngx_process.c 165 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs \ 166 -o objs/src/os/unix/ngx_daemon.o \ 167 src/os/unix/ngx_daemon.c 168 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs \ 169 -o objs/src/os/unix/ngx_setaffinity.o \ 170 src/os/unix/ngx_setaffinity.c 171 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs \ 172 -o objs/src/os/unix/ngx_setproctitle.o \ 173 src/os/unix/ngx_setproctitle.c 174 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs \ 175 -o objs/src/os/unix/ngx_posix_init.o \ 176 src/os/unix/ngx_posix_init.c 177 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs \ 178 -o objs/src/os/unix/ngx_user.o \ 179 src/os/unix/ngx_user.c 180 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs \ 181 -o objs/src/os/unix/ngx_dlopen.o \ 182 src/os/unix/ngx_dlopen.c 183 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs \ 184 -o objs/src/os/unix/ngx_process_cycle.o \ 185 src/os/unix/ngx_process_cycle.c 186 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs \ 187 -o objs/src/os/unix/ngx_linux_init.o \ 188 src/os/unix/ngx_linux_init.c 189 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs \ 190 -o objs/src/event/modules/ngx_epoll_module.o \ 191 src/event/modules/ngx_epoll_module.c 192 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs \ 193 -o objs/src/os/unix/ngx_linux_sendfile_chain.o \ 194 src/os/unix/ngx_linux_sendfile_chain.c 195 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs \ 196 -o objs/src/core/ngx_regex.o \ 197 src/core/ngx_regex.c 198 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs -I src/http -I src/http/modules \ 199 -o objs/src/http/ngx_http.o \ 200 src/http/ngx_http.c 201 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs -I src/http -I src/http/modules \ 202 -o objs/src/http/ngx_http_core_module.o \ 203 src/http/ngx_http_core_module.c 204 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs -I src/http -I src/http/modules \ 205 -o objs/src/http/ngx_http_special_response.o \ 206 src/http/ngx_http_special_response.c 207 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs -I src/http -I src/http/modules \ 208 -o objs/src/http/ngx_http_request.o \ 209 src/http/ngx_http_request.c 210 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs -I src/http -I src/http/modules \ 211 -o objs/src/http/ngx_http_parse.o \ 212 src/http/ngx_http_parse.c 213 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs -I src/http -I src/http/modules \ 214 -o objs/src/http/modules/ngx_http_log_module.o \ 215 src/http/modules/ngx_http_log_module.c 216 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs -I src/http -I src/http/modules \ 217 -o objs/src/http/ngx_http_request_body.o \ 218 src/http/ngx_http_request_body.c 219 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs -I src/http -I src/http/modules \ 220 -o objs/src/http/ngx_http_variables.o \ 221 src/http/ngx_http_variables.c 222 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs -I src/http -I src/http/modules \ 223 -o objs/src/http/ngx_http_script.o \ 224 src/http/ngx_http_script.c 225 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs -I src/http -I src/http/modules \ 226 -o objs/src/http/ngx_http_upstream.o \ 227 src/http/ngx_http_upstream.c 228 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs -I src/http -I src/http/modules \ 229 -o objs/src/http/ngx_http_upstream_round_robin.o \ 230 src/http/ngx_http_upstream_round_robin.c 231 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs -I src/http -I src/http/modules \ 232 -o objs/src/http/ngx_http_file_cache.o \ 233 src/http/ngx_http_file_cache.c 234 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs -I src/http -I src/http/modules \ 235 -o objs/src/http/ngx_http_write_filter_module.o \ 236 src/http/ngx_http_write_filter_module.c 237 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs -I src/http -I src/http/modules \ 238 -o objs/src/http/ngx_http_header_filter_module.o \ 239 src/http/ngx_http_header_filter_module.c 240 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs -I src/http -I src/http/modules \ 241 -o objs/src/http/modules/ngx_http_chunked_filter_module.o \ 242 src/http/modules/ngx_http_chunked_filter_module.c 243 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs -I src/http -I src/http/modules \ 244 -o objs/src/http/modules/ngx_http_range_filter_module.o \ 245 src/http/modules/ngx_http_range_filter_module.c 246 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs -I src/http -I src/http/modules \ 247 -o objs/src/http/modules/ngx_http_gzip_filter_module.o \ 248 src/http/modules/ngx_http_gzip_filter_module.c 249 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs -I src/http -I src/http/modules \ 250 -o objs/src/http/ngx_http_postpone_filter_module.o \ 251 src/http/ngx_http_postpone_filter_module.c 252 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs -I src/http -I src/http/modules \ 253 -o objs/src/http/modules/ngx_http_ssi_filter_module.o \ 254 src/http/modules/ngx_http_ssi_filter_module.c 255 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs -I src/http -I src/http/modules \ 256 -o objs/src/http/modules/ngx_http_charset_filter_module.o \ 257 src/http/modules/ngx_http_charset_filter_module.c 258 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs -I src/http -I src/http/modules \ 259 -o objs/src/http/modules/ngx_http_userid_filter_module.o \ 260 src/http/modules/ngx_http_userid_filter_module.c 261 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs -I src/http -I src/http/modules \ 262 -o objs/src/http/modules/ngx_http_headers_filter_module.o \ 263 src/http/modules/ngx_http_headers_filter_module.c 264 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs -I src/http -I src/http/modules \ 265 -o objs/src/http/ngx_http_copy_filter_module.o \ 266 src/http/ngx_http_copy_filter_module.c 267 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs -I src/http -I src/http/modules \ 268 -o objs/src/http/modules/ngx_http_not_modified_filter_module.o \ 269 src/http/modules/ngx_http_not_modified_filter_module.c 270 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs -I src/http -I src/http/modules \ 271 -o objs/src/http/modules/ngx_http_static_module.o \ 272 src/http/modules/ngx_http_static_module.c 273 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs -I src/http -I src/http/modules \ 274 -o objs/src/http/modules/ngx_http_autoindex_module.o \ 275 src/http/modules/ngx_http_autoindex_module.c 276 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs -I src/http -I src/http/modules \ 277 -o objs/src/http/modules/ngx_http_index_module.o \ 278 src/http/modules/ngx_http_index_module.c 279 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs -I src/http -I src/http/modules \ 280 -o objs/src/http/modules/ngx_http_auth_basic_module.o \ 281 src/http/modules/ngx_http_auth_basic_module.c 282 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs -I src/http -I src/http/modules \ 283 -o objs/src/http/modules/ngx_http_access_module.o \ 284 src/http/modules/ngx_http_access_module.c 285 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs -I src/http -I src/http/modules \ 286 -o objs/src/http/modules/ngx_http_limit_conn_module.o \ 287 src/http/modules/ngx_http_limit_conn_module.c 288 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs -I src/http -I src/http/modules \ 289 -o objs/src/http/modules/ngx_http_limit_req_module.o \ 290 src/http/modules/ngx_http_limit_req_module.c 291 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs -I src/http -I src/http/modules \ 292 -o objs/src/http/modules/ngx_http_geo_module.o \ 293 src/http/modules/ngx_http_geo_module.c 294 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs -I src/http -I src/http/modules \ 295 -o objs/src/http/modules/ngx_http_map_module.o \ 296 src/http/modules/ngx_http_map_module.c 297 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs -I src/http -I src/http/modules \ 298 -o objs/src/http/modules/ngx_http_split_clients_module.o \ 299 src/http/modules/ngx_http_split_clients_module.c 300 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs -I src/http -I src/http/modules \ 301 -o objs/src/http/modules/ngx_http_referer_module.o \ 302 src/http/modules/ngx_http_referer_module.c 303 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs -I src/http -I src/http/modules \ 304 -o objs/src/http/modules/ngx_http_rewrite_module.o \ 305 src/http/modules/ngx_http_rewrite_module.c 306 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs -I src/http -I src/http/modules \ 307 -o objs/src/http/modules/ngx_http_proxy_module.o \ 308 src/http/modules/ngx_http_proxy_module.c 309 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs -I src/http -I src/http/modules \ 310 -o objs/src/http/modules/ngx_http_fastcgi_module.o \ 311 src/http/modules/ngx_http_fastcgi_module.c 312 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs -I src/http -I src/http/modules \ 313 -o objs/src/http/modules/ngx_http_uwsgi_module.o \ 314 src/http/modules/ngx_http_uwsgi_module.c 315 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs -I src/http -I src/http/modules \ 316 -o objs/src/http/modules/ngx_http_scgi_module.o \ 317 src/http/modules/ngx_http_scgi_module.c 318 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs -I src/http -I src/http/modules \ 319 -o objs/src/http/modules/ngx_http_memcached_module.o \ 320 src/http/modules/ngx_http_memcached_module.c 321 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs -I src/http -I src/http/modules \ 322 -o objs/src/http/modules/ngx_http_empty_gif_module.o \ 323 src/http/modules/ngx_http_empty_gif_module.c 324 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs -I src/http -I src/http/modules \ 325 -o objs/src/http/modules/ngx_http_browser_module.o \ 326 src/http/modules/ngx_http_browser_module.c 327 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs -I src/http -I src/http/modules \ 328 -o objs/src/http/modules/ngx_http_upstream_hash_module.o \ 329 src/http/modules/ngx_http_upstream_hash_module.c 330 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs -I src/http -I src/http/modules \ 331 -o objs/src/http/modules/ngx_http_upstream_ip_hash_module.o \ 332 src/http/modules/ngx_http_upstream_ip_hash_module.c 333 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs -I src/http -I src/http/modules \ 334 -o objs/src/http/modules/ngx_http_upstream_least_conn_module.o \ 335 src/http/modules/ngx_http_upstream_least_conn_module.c 336 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs -I src/http -I src/http/modules \ 337 -o objs/src/http/modules/ngx_http_upstream_keepalive_module.o \ 338 src/http/modules/ngx_http_upstream_keepalive_module.c 339 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs -I src/http -I src/http/modules \ 340 -o objs/src/http/modules/ngx_http_upstream_zone_module.o \ 341 src/http/modules/ngx_http_upstream_zone_module.c 342 cc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs \ 343 -o objs/ngx_modules.o \ 344 objs/ngx_modules.c 345 cc -o objs/nginx \ 346 objs/src/core/nginx.o \ 347 objs/src/core/ngx_log.o \ 348 objs/src/core/ngx_palloc.o \ 349 objs/src/core/ngx_array.o \ 350 objs/src/core/ngx_list.o \ 351 objs/src/core/ngx_hash.o \ 352 objs/src/core/ngx_buf.o \ 353 objs/src/core/ngx_queue.o \ 354 objs/src/core/ngx_output_chain.o \ 355 objs/src/core/ngx_string.o \ 356 objs/src/core/ngx_parse.o \ 357 objs/src/core/ngx_parse_time.o \ 358 objs/src/core/ngx_inet.o \ 359 objs/src/core/ngx_file.o \ 360 objs/src/core/ngx_crc32.o \ 361 objs/src/core/ngx_murmurhash.o \ 362 objs/src/core/ngx_md5.o \ 363 objs/src/core/ngx_rbtree.o \ 364 objs/src/core/ngx_radix_tree.o \ 365 objs/src/core/ngx_slab.o \ 366 objs/src/core/ngx_times.o \ 367 objs/src/core/ngx_shmtx.o \ 368 objs/src/core/ngx_connection.o \ 369 objs/src/core/ngx_cycle.o \ 370 objs/src/core/ngx_spinlock.o \ 371 objs/src/core/ngx_rwlock.o \ 372 objs/src/core/ngx_cpuinfo.o \ 373 objs/src/core/ngx_conf_file.o \ 374 objs/src/core/ngx_module.o \ 375 objs/src/core/ngx_resolver.o \ 376 objs/src/core/ngx_open_file_cache.o \ 377 objs/src/core/ngx_crypt.o \ 378 objs/src/core/ngx_proxy_protocol.o \ 379 objs/src/core/ngx_syslog.o \ 380 objs/src/event/ngx_event.o \ 381 objs/src/event/ngx_event_timer.o \ 382 objs/src/event/ngx_event_posted.o \ 383 objs/src/event/ngx_event_accept.o \ 384 objs/src/event/ngx_event_connect.o \ 385 objs/src/event/ngx_event_pipe.o \ 386 objs/src/os/unix/ngx_time.o \ 387 objs/src/os/unix/ngx_errno.o \ 388 objs/src/os/unix/ngx_alloc.o \ 389 objs/src/os/unix/ngx_files.o \ 390 objs/src/os/unix/ngx_socket.o \ 391 objs/src/os/unix/ngx_recv.o \ 392 objs/src/os/unix/ngx_readv_chain.o \ 393 objs/src/os/unix/ngx_udp_recv.o \ 394 objs/src/os/unix/ngx_send.o \ 395 objs/src/os/unix/ngx_writev_chain.o \ 396 objs/src/os/unix/ngx_udp_send.o \ 397 objs/src/os/unix/ngx_channel.o \ 398 objs/src/os/unix/ngx_shmem.o \ 399 objs/src/os/unix/ngx_process.o \ 400 objs/src/os/unix/ngx_daemon.o \ 401 objs/src/os/unix/ngx_setaffinity.o \ 402 objs/src/os/unix/ngx_setproctitle.o \ 403 objs/src/os/unix/ngx_posix_init.o \ 404 objs/src/os/unix/ngx_user.o \ 405 objs/src/os/unix/ngx_dlopen.o \ 406 objs/src/os/unix/ngx_process_cycle.o \ 407 objs/src/os/unix/ngx_linux_init.o \ 408 objs/src/event/modules/ngx_epoll_module.o \ 409 objs/src/os/unix/ngx_linux_sendfile_chain.o \ 410 objs/src/core/ngx_regex.o \ 411 objs/src/http/ngx_http.o \ 412 objs/src/http/ngx_http_core_module.o \ 413 objs/src/http/ngx_http_special_response.o \ 414 objs/src/http/ngx_http_request.o \ 415 objs/src/http/ngx_http_parse.o \ 416 objs/src/http/modules/ngx_http_log_module.o \ 417 objs/src/http/ngx_http_request_body.o \ 418 objs/src/http/ngx_http_variables.o \ 419 objs/src/http/ngx_http_script.o \ 420 objs/src/http/ngx_http_upstream.o \ 421 objs/src/http/ngx_http_upstream_round_robin.o \ 422 objs/src/http/ngx_http_file_cache.o \ 423 objs/src/http/ngx_http_write_filter_module.o \ 424 objs/src/http/ngx_http_header_filter_module.o \ 425 objs/src/http/modules/ngx_http_chunked_filter_module.o \ 426 objs/src/http/modules/ngx_http_range_filter_module.o \ 427 objs/src/http/modules/ngx_http_gzip_filter_module.o \ 428 objs/src/http/ngx_http_postpone_filter_module.o \ 429 objs/src/http/modules/ngx_http_ssi_filter_module.o \ 430 objs/src/http/modules/ngx_http_charset_filter_module.o \ 431 objs/src/http/modules/ngx_http_userid_filter_module.o \ 432 objs/src/http/modules/ngx_http_headers_filter_module.o \ 433 objs/src/http/ngx_http_copy_filter_module.o \ 434 objs/src/http/modules/ngx_http_not_modified_filter_module.o \ 435 objs/src/http/modules/ngx_http_static_module.o \ 436 objs/src/http/modules/ngx_http_autoindex_module.o \ 437 objs/src/http/modules/ngx_http_index_module.o \ 438 objs/src/http/modules/ngx_http_auth_basic_module.o \ 439 objs/src/http/modules/ngx_http_access_module.o \ 440 objs/src/http/modules/ngx_http_limit_conn_module.o \ 441 objs/src/http/modules/ngx_http_limit_req_module.o \ 442 objs/src/http/modules/ngx_http_geo_module.o \ 443 objs/src/http/modules/ngx_http_map_module.o \ 444 objs/src/http/modules/ngx_http_split_clients_module.o \ 445 objs/src/http/modules/ngx_http_referer_module.o \ 446 objs/src/http/modules/ngx_http_rewrite_module.o \ 447 objs/src/http/modules/ngx_http_proxy_module.o \ 448 objs/src/http/modules/ngx_http_fastcgi_module.o \ 449 objs/src/http/modules/ngx_http_uwsgi_module.o \ 450 objs/src/http/modules/ngx_http_scgi_module.o \ 451 objs/src/http/modules/ngx_http_memcached_module.o \ 452 objs/src/http/modules/ngx_http_empty_gif_module.o \ 453 objs/src/http/modules/ngx_http_browser_module.o \ 454 objs/src/http/modules/ngx_http_upstream_hash_module.o \ 455 objs/src/http/modules/ngx_http_upstream_ip_hash_module.o \ 456 objs/src/http/modules/ngx_http_upstream_least_conn_module.o \ 457 objs/src/http/modules/ngx_http_upstream_keepalive_module.o \ 458 objs/src/http/modules/ngx_http_upstream_zone_module.o \ 459 objs/ngx_modules.o \ 460 -ldl -lpthread -lcrypt -lpcre -lcrypto -lcrypto -lz \ 461 -Wl,-E 462 sed -e "s|%%PREFIX%%|/usr/local/nginx|" \ 463 -e "s|%%PID_PATH%%|/usr/local/nginx/logs/nginx.pid|" \ 464 -e "s|%%CONF_PATH%%|/usr/local/nginx/conf/nginx.conf|" \ 465 -e "s|%%ERROR_LOG_PATH%%|/usr/local/nginx/logs/error.log|" \ 466 < man/nginx.8 > objs/nginx.8 467 make[1]: Leaving directory `/root/nginx-1.10.2' 468 [root@localhost nginx-1.10.2]# make install 469 make -f objs/Makefile install 470 make[1]: Entering directory `/root/nginx-1.10.2' 471 test -d '/usr/local/nginx' || mkdir -p '/usr/local/nginx' 472 test -d '/usr/local/nginx/sbin' \ 473 || mkdir -p '/usr/local/nginx/sbin' 474 test ! -f '/usr/local/nginx/sbin/nginx' \ 475 || mv '/usr/local/nginx/sbin/nginx' \ 476 '/usr/local/nginx/sbin/nginx.old' 477 cp objs/nginx '/usr/local/nginx/sbin/nginx' 478 test -d '/usr/local/nginx/conf' \ 479 || mkdir -p '/usr/local/nginx/conf' 480 cp conf/koi-win '/usr/local/nginx/conf' 481 cp conf/koi-utf '/usr/local/nginx/conf' 482 cp conf/win-utf '/usr/local/nginx/conf' 483 test -f '/usr/local/nginx/conf/mime.types' \ 484 || cp conf/mime.types '/usr/local/nginx/conf' 485 cp conf/mime.types '/usr/local/nginx/conf/mime.types.default' 486 test -f '/usr/local/nginx/conf/fastcgi_params' \ 487 || cp conf/fastcgi_params '/usr/local/nginx/conf' 488 cp conf/fastcgi_params \ 489 '/usr/local/nginx/conf/fastcgi_params.default' 490 test -f '/usr/local/nginx/conf/fastcgi.conf' \ 491 || cp conf/fastcgi.conf '/usr/local/nginx/conf' 492 cp conf/fastcgi.conf '/usr/local/nginx/conf/fastcgi.conf.default' 493 test -f '/usr/local/nginx/conf/uwsgi_params' \ 494 || cp conf/uwsgi_params '/usr/local/nginx/conf' 495 cp conf/uwsgi_params \ 496 '/usr/local/nginx/conf/uwsgi_params.default' 497 test -f '/usr/local/nginx/conf/scgi_params' \ 498 || cp conf/scgi_params '/usr/local/nginx/conf' 499 cp conf/scgi_params \ 500 '/usr/local/nginx/conf/scgi_params.default' 501 test -f '/usr/local/nginx/conf/nginx.conf' \ 502 || cp conf/nginx.conf '/usr/local/nginx/conf/nginx.conf' 503 cp conf/nginx.conf '/usr/local/nginx/conf/nginx.conf.default' 504 test -d '/usr/local/nginx/logs' \ 505 || mkdir -p '/usr/local/nginx/logs' 506 test -d '/usr/local/nginx/logs' \ 507 || mkdir -p '/usr/local/nginx/logs' 508 test -d '/usr/local/nginx/html' \ 509 || cp -R html '/usr/local/nginx' 510 test -d '/usr/local/nginx/logs' \ 511 || mkdir -p '/usr/local/nginx/logs' 512 make[1]: Leaving directory `/root/nginx-1.10.2'
安裝make install （make install是把這些編譯出來的可執行文件和庫文件復制到合適的地方）
# make install
修改配置
# 進入配置修改
[root@localhost conf]# vim /usr/local/nginx/conf/nginx.conf
# 重點修改以下內容
#gzip on;
upstream cluster{
server 127.0.0.1:3333;
server 127.0.0.1:4444;
server 127.0.0.1:5555;
}
server {
# listen 80;
listen 1111;
server_name localhost;
#charset koi8-r;
#access_log logs/host.access.log main;
location / {
#root html;
#index index.html index.htm;
# 2020-07-05 zp
proxy_pass http://cluster;
}
啟動
參數 -c 指定了配置文件的路徑，如果不加的話就是使用默認的配置文件
[root@localhost nginx-1.10.2]# /usr/local/nginx/sbin/nginx -c /usr/local/nginx/conf/nginx.conf
停止
停止操作是通過向nginx進程發送信號（什么是信號請參閱linux文 章）來進行的
查詢nginx主進程號
ps -ef | grep nginx
在進程列表里 面找master進程，它的編號就是主進程號了。
發送信號
從容停止Nginx
kill -QUIT 主進程號
快速停止Nginx
kill -TERM 主進程號
強制停止Nginx
pkill -9 nginx
另外， 若在nginx.conf配置了pid文件存放路徑則該文件存放的就是Nginx主進程號，如果沒指定則放在nginx的logs目錄下。有了pid文 件，我們就不用先查詢Nginx的主進程號，而直接向Nginx發送信號了，命令如下：
kill -信號類型 '/usr/nginx/logs/nginx.pid'
平滑重啟命令：
kill -HUP 主進程號或進程號文件路徑
kill -信號類型 '/usr/nginx/logs/nginx.pid'
平滑重啟
如果更改了配置就要重啟Nginx，要先關閉Nginx再打開？不是的，可以向Nginx 發送信號，平滑重啟。平滑重啟命令：
kill -HUP 主進程號或進程號文件路徑
或者使用
/usr/nginx/sbin/nginx -s reload
注意，修改了配置文件后最好先檢查一下修改過的配置文件是否正 確，以免重啟后Nginx出現錯誤影響服務器穩定運行。
判斷Nginx配置是否正確命令
nginx -t -c /usr/nginx/conf/nginx.conf或者
/usr/nginx/sbin/nginx -t
3.JDK安裝及配置
（1）下載linux版本的SDK jdk-8u251-linux-x64.tar.gz
（2）解壓SDK
jdk-8u251-linux-x64.tar.gz
（3）移動解壓的文件
mv jdk1.8.0_251/ /usr/local/javajdk
（4）編輯配置
vim /etc/profile 文件結尾---javajdk是我的安裝目錄 #Java Env export JAVA_HOME=/usr/local/javajdk export JRE_HOME=${JAVA_HOME}/jre export CLASSPATH=.:${JAVA_HOME}/lib:${JRE_HOME}/lib export PATH=${JAVA_HOME}/bin:$PATH export PATH=$PATH:$JAVA_HOME/bin
# 保存退出
（5）讓配置文件立即生效
source /etc/profile
（6）輸入java 和java -version能輸出信息，就已經成功了
[root@localhost ~]# java -version java version "1.8.0_251" Java(TM) SE Runtime Environment (build 1.8.0_251-b08) Java HotSpot(TM) 64-Bit Server VM (build 25.251-b08, mixed mode)
4.Nacos安裝及配置
（1）下載Nacos ,我安裝的是1.2.0，目前最新版本是1.3.0。下載地址：https://github.com/alibaba/nacos/tags
（2）拷貝至Linux並解壓
tar -zxvf nacos-server-1.2.0.tar.gz
（3）修改application.properties及cluster.conf，修改前記得備份。
# 進入解壓目錄 cd nacos # 查看所有文件 [root@localhost nacos]# ls bin conf data LICENSE logs NOTICE status target #進入conf 並編輯application.properties vim conf/application.properties # 按照官方文檔提示，在結尾處添加 db.num=1 db.url.0=jdbc:mysql://127.0.0.1:3306/nacos_config?characterEncoding=utf8&connectTimeout=1000&socketTimeout=3000&autoReconnect=true db.user=root db.password=root # 新建cluster.conf，因為官方為我們提供了cluster.conf.example cp cluster.conf.example cluster.conf # 編輯cluster.conf vim cluster.conf #根據需求填寫配置 #it is ip #example #10.10.109.214 #11.16.128.34 #11.16.128.36 192.168.100.148:3333 192.168.100.148:4444 192.168.100.148:5555
（4）修改startup.sh
第一處修改（如果沒有更改過配置，應該在第57行）：
# 此處增加了p: 以及 p)等等。 while getopts ":m:f:s:p:" opt do case $opt in m) MODE=$OPTARG;; f) FUNCTION_MODE=$OPTARG;; s) SERVER=$OPTARG;; p) PORT=$OPTARG;; ?) echo "Unknown parameter" exit 1;; esac done
第二處修改（倒數第二行）：
# 增加了 -Dserver.port=${PORT}
nohup $JAVA -Dserver.port=${PORT} ${JAVA_OPT} nacos.nacos >> ${BASE_DIR}/logs/start.out 2>&1 &
第三處修改：修改JVM（87行，可選配置，因為我配置完前兩項保存后，啟動程序，一直報內存溢出。所以進行修改）
原配置如下
JAVA_OPT="${JAVA_OPT} -server -Xms2g -Xmx2g -Xmn1g -XX:MetaspaceSize=128m -XX:MaxMetaspaceSize=320m
-Xms -Xmx -Xmn 這里默認給了2g、2g、1g，我修改了如下配置：
JAVA_OPT="${JAVA_OPT} -server -Xms512m -Xmx512m -Xmn256m -XX:MetaspaceSize=128m -XX:MaxMetaspaceSize=320m"
（5）保存退出，並啟動實例(前提是mysql相關配置都已經完成，如未完成移步MYSQL安裝)
[root@localhost bin]# bash startup.sh -p 3333 [root@localhost bin]# bash startup.sh -p 4444 [root@localhost bin]# bash startup.sh -p 5555 # 這里需要注意的是，在控制台輸出成功不可信，一定要去logs下看下是否成功
[root@localhost bin]# vim ../logs/start.out
,--. ,--.'| ,--,: : | Nacos 1.2.0 ,`--.'`| ' : ,---. Running in cluster mode, All function modules | : : | | ' ,'\ .--.--. Port: 5555 : | \ | : ,--.--. ,---. / / | / / ' Pid: 2420 | : ' '; | / \ / \. ; ,. :| : /`./ Console: http://192.168.100.148:5555/nacos/index.html ' ' ;. ;.--. .-. | / / '' | |: :| : ;_ | | | \ | \__\/: . .. ' / ' | .; : \ \ `. https://nacos.io ' : | ; .' ," .--.; |' ; :__| : | `----. \ | | '`--' / / ,. |' | '.'|\ \ / / /`--' / ' : | ; : .' \ : : `----' '--'. / ; |.' | , .-./\ \ / `--'---' '---' `--`---' `----' 2020-07-05 21:26:49,857 INFO Nacos is starting... "../logs/start.out" [readonly] 249L, 7887C
（6）訪問對應路徑，在此之前一定要關閉防火牆
http://192.168.100.148:3333/nacos
http://192.168.100.148:4444/nacos
http://192.168.100.148:5555/nacos
（7）啟動nginx（這里就是我們之前配置的nginx）
# 按照指定配置啟動nginx
[root@localhost nginx-1.10.2]# /usr/local/nginx/sbin/nginx -c /usr/local/nginx/conf/nginx.conf
啟動成功后，訪問http://192.168.100.148:1111/nacos，可以正常訪問nacos頁面即為正常。
5.Maven安裝及配置
暫時到這里還沒用上maven，所以還沒有進行配置，如需配置，暫時參考下面配置，后續如果我配置了再補充。
https://www.cnblogs.com/kuoAT/p/7560267.html
6.MySQL安裝
因為我的mysql是用docker安裝的，所以沒有詳細說，我就把docker安裝的步驟貼一下
# 安裝鏡像 [root@192 ~]# docker pull mysql:5.7.29 # 運行 [root@192 ~]# docker run -p 3306:3306 --name mysql01 -e MYSQL_ROOT_PASSWORD=root -d
創建nacos_config數據庫，並執行官方提供的數據庫代碼，在nacos/conf/nacos-mysql.sql
/******************************************/ /* 數據庫全名 = nacos_config */ /* 表名稱 = config_info */ /******************************************/ CREATE TABLE `config_info` ( `id` bigint(20) NOT NULL AUTO_INCREMENT COMMENT 'id', `data_id` varchar(255) NOT NULL COMMENT 'data_id', `group_id` varchar(255) DEFAULT NULL, `content` longtext NOT NULL COMMENT 'content', `md5` varchar(32) DEFAULT NULL COMMENT 'md5', `gmt_create` datetime NOT NULL DEFAULT CURRENT_TIMESTAMP COMMENT '創建時間', `gmt_modified` datetime NOT NULL DEFAULT CURRENT_TIMESTAMP COMMENT '修改時間', `src_user` text COMMENT 'source user', `src_ip` varchar(20) DEFAULT NULL COMMENT 'source ip', `app_name` varchar(128) DEFAULT NULL, `tenant_id` varchar(128) DEFAULT '' COMMENT '租戶字段', `c_desc` varchar(256) DEFAULT NULL, `c_use` varchar(64) DEFAULT NULL, `effect` varchar(64) DEFAULT NULL, `type` varchar(64) DEFAULT NULL, `c_schema` text, PRIMARY KEY (`id`), UNIQUE KEY `uk_configinfo_datagrouptenant` (`data_id`,`group_id`,`tenant_id`) ) ENGINE=InnoDB DEFAULT CHARSET=utf8 COLLATE=utf8_bin COMMENT='config_info'; /******************************************/ /* 數據庫全名 = nacos_config */ /* 表名稱 = config_info_aggr */ /******************************************/ CREATE TABLE `config_info_aggr` ( `id` bigint(20) NOT NULL AUTO_INCREMENT COMMENT 'id', `data_id` varchar(255) NOT NULL COMMENT 'data_id', `group_id` varchar(255) NOT NULL COMMENT 'group_id', `datum_id` varchar(255) NOT NULL COMMENT 'datum_id', `content` longtext NOT NULL COMMENT '內容', `gmt_modified` datetime NOT NULL COMMENT '修改時間', `app_name` varchar(128) DEFAULT NULL, `tenant_id` varchar(128) DEFAULT '' COMMENT '租戶字段', PRIMARY KEY (`id`), UNIQUE KEY `uk_configinfoaggr_datagrouptenantdatum` (`data_id`,`group_id`,`tenant_id`,`datum_id`) ) ENGINE=InnoDB DEFAULT CHARSET=utf8 COLLATE=utf8_bin COMMENT='增加租戶字段'; /******************************************/ /* 數據庫全名 = nacos_config */ /* 表名稱 = config_info_beta */ /******************************************/ CREATE TABLE `config_info_beta` ( `id` bigint(20) NOT NULL AUTO_INCREMENT COMMENT 'id', `data_id` varchar(255) NOT NULL COMMENT 'data_id', `group_id` varchar(128) NOT NULL COMMENT 'group_id', `app_name` varchar(128) DEFAULT NULL COMMENT 'app_name', `content` longtext NOT NULL COMMENT 'content', `beta_ips` varchar(1024) DEFAULT NULL COMMENT 'betaIps', `md5` varchar(32) DEFAULT NULL COMMENT 'md5', `gmt_create` datetime NOT NULL DEFAULT CURRENT_TIMESTAMP COMMENT '創建時間', `gmt_modified` datetime NOT NULL DEFAULT CURRENT_TIMESTAMP COMMENT '修改時間', `src_user` text COMMENT 'source user', `src_ip` varchar(20) DEFAULT NULL COMMENT 'source ip', `tenant_id` varchar(128) DEFAULT '' COMMENT '租戶字段', PRIMARY KEY (`id`), UNIQUE KEY `uk_configinfobeta_datagrouptenant` (`data_id`,`group_id`,`tenant_id`) ) ENGINE=InnoDB DEFAULT CHARSET=utf8 COLLATE=utf8_bin COMMENT='config_info_beta'; /******************************************/ /* 數據庫全名 = nacos_config */ /* 表名稱 = config_info_tag */ /******************************************/ CREATE TABLE `config_info_tag` ( `id` bigint(20) NOT NULL AUTO_INCREMENT COMMENT 'id', `data_id` varchar(255) NOT NULL COMMENT 'data_id', `group_id` varchar(128) NOT NULL COMMENT 'group_id', `tenant_id` varchar(128) DEFAULT '' COMMENT 'tenant_id', `tag_id` varchar(128) NOT NULL COMMENT 'tag_id', `app_name` varchar(128) DEFAULT NULL COMMENT 'app_name', `content` longtext NOT NULL COMMENT 'content', `md5` varchar(32) DEFAULT NULL COMMENT 'md5', `gmt_create` datetime NOT NULL DEFAULT CURRENT_TIMESTAMP COMMENT '創建時間', `gmt_modified` datetime NOT NULL DEFAULT CURRENT_TIMESTAMP COMMENT '修改時間', `src_user` text COMMENT 'source user', `src_ip` varchar(20) DEFAULT NULL COMMENT 'source ip', PRIMARY KEY (`id`), UNIQUE KEY `uk_configinfotag_datagrouptenanttag` (`data_id`,`group_id`,`tenant_id`,`tag_id`) ) ENGINE=InnoDB DEFAULT CHARSET=utf8 COLLATE=utf8_bin COMMENT='config_info_tag'; /******************************************/ /* 數據庫全名 = nacos_config */ /* 表名稱 = config_tags_relation */ /******************************************/ CREATE TABLE `config_tags_relation` ( `id` bigint(20) NOT NULL COMMENT 'id', `tag_name` varchar(128) NOT NULL COMMENT 'tag_name', `tag_type` varchar(64) DEFAULT NULL COMMENT 'tag_type', `data_id` varchar(255) NOT NULL COMMENT 'data_id', `group_id` varchar(128) NOT NULL COMMENT 'group_id', `tenant_id` varchar(128) DEFAULT '' COMMENT 'tenant_id', `nid` bigint(20) NOT NULL AUTO_INCREMENT, PRIMARY KEY (`nid`), UNIQUE KEY `uk_configtagrelation_configidtag` (`id`,`tag_name`,`tag_type`), KEY `idx_tenant_id` (`tenant_id`) ) ENGINE=InnoDB DEFAULT CHARSET=utf8 COLLATE=utf8_bin COMMENT='config_tag_relation'; /******************************************/ /* 數據庫全名 = nacos_config */ /* 表名稱 = group_capacity */ /******************************************/ CREATE TABLE `group_capacity` ( `id` bigint(20) unsigned NOT NULL AUTO_INCREMENT COMMENT '主鍵ID', `group_id` varchar(128) NOT NULL DEFAULT '' COMMENT 'Group ID，空字符表示整個集群', `quota` int(10) unsigned NOT NULL DEFAULT '0' COMMENT '配額，0表示使用默認值', `usage` int(10) unsigned NOT NULL DEFAULT '0' COMMENT '使用量', `max_size` int(10) unsigned NOT NULL DEFAULT '0' COMMENT '單個配置大小上限，單位為字節，0表示使用默認值', `max_aggr_count` int(10) unsigned NOT NULL DEFAULT '0' COMMENT '聚合子配置最大個數，，0表示使用默認值', `max_aggr_size` int(10) unsigned NOT NULL DEFAULT '0' COMMENT '單個聚合數據的子配置大小上限，單位為字節，0表示使用默認值', `max_history_count` int(10) unsigned NOT NULL DEFAULT '0' COMMENT '最大變更歷史數量', `gmt_create` datetime NOT NULL DEFAULT CURRENT_TIMESTAMP COMMENT '創建時間', `gmt_modified` datetime NOT NULL DEFAULT CURRENT_TIMESTAMP COMMENT '修改時間', PRIMARY KEY (`id`), UNIQUE KEY `uk_group_id` (`group_id`) ) ENGINE=InnoDB DEFAULT CHARSET=utf8 COLLATE=utf8_bin COMMENT='集群、各Group容量信息表'; /******************************************/ /* 數據庫全名 = nacos_config */ /* 表名稱 = his_config_info */ /******************************************/ CREATE TABLE `his_config_info` ( `id` bigint(64) unsigned NOT NULL, `nid` bigint(20) unsigned NOT NULL AUTO_INCREMENT, `data_id` varchar(255) NOT NULL, `group_id` varchar(128) NOT NULL, `app_name` varchar(128) DEFAULT NULL COMMENT 'app_name', `content` longtext NOT NULL, `md5` varchar(32) DEFAULT NULL, `gmt_create` datetime NOT NULL DEFAULT CURRENT_TIMESTAMP, `gmt_modified` datetime NOT NULL DEFAULT CURRENT_TIMESTAMP, `src_user` text, `src_ip` varchar(20) DEFAULT NULL, `op_type` char(10) DEFAULT NULL, `tenant_id` varchar(128) DEFAULT '' COMMENT '租戶字段', PRIMARY KEY (`nid`), KEY `idx_gmt_create` (`gmt_create`), KEY `idx_gmt_modified` (`gmt_modified`), KEY `idx_did` (`data_id`) ) ENGINE=InnoDB DEFAULT CHARSET=utf8 COLLATE=utf8_bin COMMENT='多租戶改造'; /******************************************/ /* 數據庫全名 = nacos_config */ /* 表名稱 = tenant_capacity */ /******************************************/ CREATE TABLE `tenant_capacity` ( `id` bigint(20) unsigned NOT NULL AUTO_INCREMENT COMMENT '主鍵ID', `tenant_id` varchar(128) NOT NULL DEFAULT '' COMMENT 'Tenant ID', `quota` int(10) unsigned NOT NULL DEFAULT '0' COMMENT '配額，0表示使用默認值', `usage` int(10) unsigned NOT NULL DEFAULT '0' COMMENT '使用量', `max_size` int(10) unsigned NOT NULL DEFAULT '0' COMMENT '單個配置大小上限，單位為字節，0表示使用默認值', `max_aggr_count` int(10) unsigned NOT NULL DEFAULT '0' COMMENT '聚合子配置最大個數', `max_aggr_size` int(10) unsigned NOT NULL DEFAULT '0' COMMENT '單個聚合數據的子配置大小上限，單位為字節，0表示使用默認值', `max_history_count` int(10) unsigned NOT NULL DEFAULT '0' COMMENT '最大變更歷史數量', `gmt_create` datetime NOT NULL DEFAULT CURRENT_TIMESTAMP COMMENT '創建時間', `gmt_modified` datetime NOT NULL DEFAULT CURRENT_TIMESTAMP COMMENT '修改時間', PRIMARY KEY (`id`), UNIQUE KEY `uk_tenant_id` (`tenant_id`) ) ENGINE=InnoDB DEFAULT CHARSET=utf8 COLLATE=utf8_bin COMMENT='租戶容量信息表'; CREATE TABLE `tenant_info` ( `id` bigint(20) NOT NULL AUTO_INCREMENT COMMENT 'id', `kp` varchar(128) NOT NULL COMMENT 'kp', `tenant_id` varchar(128) default '' COMMENT 'tenant_id', `tenant_name` varchar(128) default '' COMMENT 'tenant_name', `tenant_desc` varchar(256) DEFAULT NULL COMMENT 'tenant_desc', `create_source` varchar(32) DEFAULT NULL COMMENT 'create_source', `gmt_create` bigint(20) NOT NULL COMMENT '創建時間', `gmt_modified` bigint(20) NOT NULL COMMENT '修改時間', PRIMARY KEY (`id`), UNIQUE KEY `uk_tenant_info_kptenantid` (`kp`,`tenant_id`), KEY `idx_tenant_id` (`tenant_id`) ) ENGINE=InnoDB DEFAULT CHARSET=utf8 COLLATE=utf8_bin COMMENT='tenant_info'; CREATE TABLE `users` ( `username` varchar(50) NOT NULL PRIMARY KEY, `password` varchar(500) NOT NULL, `enabled` boolean NOT NULL ); CREATE TABLE `roles` ( `username` varchar(50) NOT NULL, `role` varchar(50) NOT NULL, UNIQUE INDEX `idx_user_role` (`username` ASC, `role` ASC) USING BTREE ); CREATE TABLE `permissions` ( `role` varchar(50) NOT NULL, `resource` varchar(512) NOT NULL, `action` varchar(8) NOT NULL, UNIQUE INDEX `uk_role_permission` (`role`,`resource`,`action`) USING BTREE ); INSERT INTO users (username, password, enabled) VALUES ('nacos', '$2a$10$EuWPZHzz32dJN7jexM34MOeYirDdFAZm2kuWj7VEOJhhZkDrxfvUu', TRUE); INSERT INTO roles (username, role) VALUES ('nacos', 'ROLE_ADMIN');
如果執行失敗，則去修改mysql相關配置
root@409e4ca6760c:/etc/mysql# vim /etc/mysql/mysql.conf.d/mysqld.cnf
增加了sql_mode。。。
重啟Mysql即可。