【雕爺學編程】Arduino動手做（67）---BMP180氣壓傳感器

37款傳感器與執行器的提法，在網絡上廣泛流傳，其實Arduino能夠兼容的傳感器模塊肯定是不止這37種的。鑒於本人手頭積累了一些傳感器和執行器模塊，依照實踐出真知（一定要動手做）的理念，以學習和交流為目的，這里准備逐一動手嘗試系列實驗，不管成功（程序走通）與否，都會記錄下來---小小的進步或是搞不掂的問題，希望能夠拋磚引玉。

【Arduino】168種傳感器模塊系列實驗（資料+代碼+圖形+仿真）

實驗六十七： GY-68 BMP180 新款 BOSCH溫度模塊氣壓傳感器（替代BMP085）

BMP180

是博世Sensortec的新數字氣壓傳感器，具有很高的性能，使應用先進的移動設備，如智能手機、平板電腦和體育設備。它遵循了BMP085帶來了很多改進，像小尺寸和數字接口的擴張。超低功耗降至3μA使BMP180節電為您的移動設備的領導者。BMP180也是傑出的非常穩定的性能，最好有獨立電源供電。BMP180是一款高精度、小體積、超低能耗的壓力傳感器，可以應用在移動設備中它的性能卓越，絕對精度最低可以達到0.03hPa，並且耗電極低，只有3μA。BMP180采用強大的8-pin陶瓷無引線芯片承載（LCC）超薄封裝，可以通過I2C總線直接與各種微處理器相連。

 

BMP180主要特點

壓力范圍：300~1100hPa（海拔9000米~-500米）

電源電壓：1.8V~3.6V（VDDA），1.62V~3.6V（VDDD） VIN需要5V

LCC8封裝：無鉛陶瓷載體封裝（LCC）

低功耗：5μA，在標准模式

高精度：低功耗模式下，分辨率為0.06hPa（0.5米）

高線性模式下，分辨率為0.03hPa（0.25米）

含溫度輸出

I2C接口

溫度補償

無鉛，符合RoHS規范

MSL 1反應時間：7.5ms

待機電流：0.1μA

無需外部時鍾電路

 

BMP180技術數據

壓力范圍300……1100 hPa

均方根噪聲中表達壓力0.06 hPa typ。(超低功耗模式)

0.02 hPa typ。(超高分辨率模式)

均方根噪聲中表達高度0.5 m,typ。(超低功耗模式)

0.17米,typ。(超高分辨率模式)

相對精度的壓力

VDD = 3.3 v 950……1050 hPa / hPa±0.12

@ 25°C / m±1.0

700年……900 hPa / hPa±0.12

25…40°C / m±1.0

絕對精度

p = 300…1100 hpa

(溫度= 0…+ 65°C,VDD = 3.3。-4.0 V)壓力:……+ 2.0 hPa

溫度:±1°C,typ。

平均電流消耗(1 Hz刷新率數據)

峰值電流3μA典型(超低功耗模式)

32μA,典型的(高級模式)

650μA,典型的

待機電流1.62……3.6 V

電源電壓vddio 1.62……3.6 V

電源電壓vdd 1.8……3.6 V

操作溫度。

范圍全面准確”40…+ 85°C

0…+ 65°C

conv壓力。5毫秒,典型的(標准模式)

I2C傳輸速率3.4 MHz,馬克斯。

BMP180典型應用

GPS精准導航（航位推算，上下橋檢測等）

室內室外導航

休閑、體育和醫療健康等監測

天氣預報

垂直速度指示（上升/下沉速度）

風扇功率控制

體育設備，如高度剖面

 

BMP180氣壓模塊是一款高精度、小體積、低能耗的壓力傳感器，可以應用在移動設備中，它的性能卓越，絕對精度最低可以達到0.03hPa，並且耗電極低，只有3μA。BMP180采用強大的8-pin陶瓷無引線芯片承載（LCC）超薄封裝，可以通過I2C總線直接與各種微處理器相連。

特性曲線

模塊電原理圖

需要用的 “SFE_BMP180” 庫文件如下

SFE_BMP180.h

 

/*

【Arduino】66種傳感器模塊系列實驗（68）

實驗六十八：BMP180 新款 BOSCH溫度模塊氣壓傳感器（代替BMP085）

SFE_BMP180.h

*/



#ifndef SFE_BMP180_h

#define SFE_BMP180_h

#if defined(ARDUINO) && ARDUINO >= 100

#include "Arduino.h"

#else

#include "WProgram.h"

#endif

class SFE_BMP180

{

  public:

      SFE_BMP180(); 

      char begin();

        shorted?)

      

      char startTemperature(void);

        

      char getTemperature(double &T);

        startTemperature command

        

      char startPressure(char oversampling);

        

      char getPressure(double &P, double &T);

        startPressure command        

      double sealevel(double P, double A);

        weather data)

        

      double altitude(double P, double P0);

        sea-level, runway, etc.)

        

      char getError(void);

        

  private:

   

      char readInt(char address, int16_t &value);

        

      char readUInt(char address, uint16_t &value);

       

      char readBytes(unsigned char *values, char length);

        

        

      char writeBytes(unsigned char *values, char length);

        subsequent registers)

        

      int16_t AC1,AC2,AC3,VB1,VB2,MB,MC,MD;

      uint16_t AC4,AC5,AC6; 

      double c5,c6,mc,md,x0,x1,x2,y0,y1,y2,p0,p1,p2;

      char _error;

};

#define BMP180_ADDR 0x77 

#define BMP180_REG_CONTROL 0xF4

#define BMP180_REG_RESULT 0xF6

#define BMP180_COMMAND_TEMPERATURE 0x2E

#define BMP180_COMMAND_PRESSURE0 0x34

#define BMP180_COMMAND_PRESSURE1 0x74

#define BMP180_COMMAND_PRESSURE2 0xB4

#define BMP180_COMMAND_PRESSURE3 0xF4

　　

SFE_BMP180.cp

 

/*

【Arduino】66種傳感器模塊系列實驗（68）

實驗六十八：BMP180 新款 BOSCH溫度模塊氣壓傳感器（代替BMP085）

SFE_BMP180.cp

*/

#include <SFE_BMP180.h>

#include <Wire.h>

#include <stdio.h>

#include <math.h>

SFE_BMP180::SFE_BMP180()

{

}

char SFE_BMP180::begin()

{

    double c3,c4,b1;



    Wire.begin();

    if (readInt(0xAA,AC1) &&

        readInt(0xAC,AC2) &&

        readInt(0xAE,AC3) &&

        readUInt(0xB0,AC4) &&

        readUInt(0xB2,AC5) &&

        readUInt(0xB4,AC6) &&

        readInt(0xB6,VB1) &&

        readInt(0xB8,VB2) &&

        readInt(0xBA,MB) &&

        readInt(0xBC,MC) &&

        readInt(0xBE,MD))

    {

AC6 = 23153;



Calcs.pdf



25671; AC6 = 18974;

        c3 = 160.0 * pow(2,-15) * AC3;

        c4 = pow(10,-3) * pow(2,-15) * AC4;

        b1 = pow(160,2) * pow(2,-30) * VB1;

        c5 = (pow(2,-15) / 160) * AC5;

        c6 = AC6;

        mc = (pow(2,11) / pow(160,2)) * MC;

        md = MD / 160.0;

        x0 = AC1;

        x1 = 160.0 * pow(2,-13) * AC2;

        x2 = pow(160,2) * pow(2,-25) * VB2;

        y0 = c4 * pow(2,15);

        y1 = c4 * c3;

        y2 = c4 * b1;

        p0 = (3791.0 - 8.0) / 1600.0;

        p1 = 1.0 - 7357.0 * pow(2,-20);

        p2 = 3038.0 * 100.0 * pow(2,-36);

        return(1);

    }

    else

    {



        return(0);

    }

}

char SFE_BMP180::readInt(char address, int16_t &value)

{

    unsigned char data[2];

    data[0] = address;

    if (readBytes(data,2))

    {

        value = (int16_t)((data[0]<<8)|data[1]);



negative

        return(1);

    }

    value = 0;

    return(0);

}

char SFE_BMP180::readUInt(char address, uint16_t &value)

{

    unsigned char data[2];

    data[0] = address;

    if (readBytes(data,2))

    {

        value = (((uint16_t)data[0]<<8)|(uint16_t)data[1]);

        return(1);

    }

    value = 0;

    return(0);

}

char SFE_BMP180::readBytes(unsigned char *values, char length)

{

    char x;

    Wire.beginTransmission(BMP180_ADDR);

    Wire.write(values[0]);

    _error = Wire.endTransmission();

    if (_error == 0)

    {

        Wire.requestFrom(BMP180_ADDR,length);

while(Wire.available() != length) ; 

        for(x=0;x<length;x++)

        {

            values[x] = Wire.read();

        }

        return(1);

    }

    return(0);

}

char SFE_BMP180::writeBytes(unsigned char *values, char length)

{

    char x;



    Wire.beginTransmission(BMP180_ADDR);

    Wire.write(values,length);

    _error = Wire.endTransmission();

    if (_error == 0)

        return(1);

    else

        return(0);

}

char SFE_BMP180::startTemperature(void)

{

    unsigned char data[2], result;



    data[0] = BMP180_REG_CONTROL;

    data[1] = BMP180_COMMAND_TEMPERATURE;

    result = writeBytes(data, 2);

if (result) 

return(5); 

    else

return(0); 

}

char SFE_BMP180::getTemperature(double &T)

{

    unsigned char data[2];

    char result;

    double tu, a;



    data[0] = BMP180_REG_RESULT;

    result = readBytes(data, 2);

if (result) 

    {

        tu = (data[0] * 256.0) + data[1];



        a = c5 * (tu - c6);

        T = a + (mc / (a + md));

    }

    return(result);

}

char SFE_BMP180::startPressure(char oversampling)

{

    unsigned char data[2], result, delay;



    data[0] = BMP180_REG_CONTROL;

    switch (oversampling)

    {

        case 0:

            data[1] = BMP180_COMMAND_PRESSURE0;

            delay = 5;

        break;

        case 1:

            data[1] = BMP180_COMMAND_PRESSURE1;

            delay = 8;

        break;

        case 2:

            data[1] = BMP180_COMMAND_PRESSURE2;

            delay = 14;

        break;

        case 3:

            data[1] = BMP180_COMMAND_PRESSURE3;

            delay = 26;

        break;

        default:

            data[1] = BMP180_COMMAND_PRESSURE0;

            delay = 5;

        break;

    }

    result = writeBytes(data, 2);

    if (result)

return(delay); 

    else

return(0); 

}

char SFE_BMP180::getPressure(double &P, double &T)

sealevel().

{

    unsigned char data[3];

    char result;

    double pu,s,x,y,z;



    data[0] = BMP180_REG_RESULT;

    result = readBytes(data, 3);

if (result) 

    {

        pu = (data[0] * 256.0) + data[1] + (data[2]/256.0);



        s = T - 25.0;

        x = (x2 * pow(s,2)) + (x1 * s) + x0;

        y = (y2 * pow(s,2)) + (y1 * s) + y0;

        z = (pu - x) / y;

        P = (p2 * pow(z,2)) + (p1 * z) + p0;

    }

    return(result);

}

double SFE_BMP180::sealevel(double P, double A)

{

    return(P/pow(1-(A/44330.0),5.255));

}

double SFE_BMP180::altitude(double P, double P0)

{

    return(44330.0*(1-pow(P/P0,1/5.255)));

}

char SFE_BMP180::getError(void)



{

    return(_error);

}

　　

模塊接線方式

1.先連接芯片與單片機（通過I2C接口），按照如下方式連接

5V—VIN

GND–GND

A5—SCL

A4—SDA

2.然后UNO通過usb與PC電腦連接

3.拷貝后面的代碼燒錄進Arduino

 

實驗開源代碼

/*

【Arduino】168種傳感器模塊系列實驗（67）

實驗六十七：BMP180 新款 BOSCH溫度模塊氣壓傳感器（代替BMP085）

程序之一

*/



#include <SFE_BMP180.h>

SFE_BMP180 AirPresure;

char presureDelayTime;

double presureP, presureT;

void setup() {

  Serial.begin(9600);

  AirPresure.begin();

}

void loop()

{

  presureDelayTime = AirPresure.startPressure(3);

  if (presureDelayTime != 0)

  {

  delay(presureDelayTime);

  presureDelayTime = AirPresure.getPressure(presureP, presureT);

  if (presureDelayTime != 0)

  {

    

    Serial.print("Current Preasure: ");

    Serial.print(presureP);

    Serial.println(" bar");

    Serial.print(presureP);

    Serial.print(" bar is");

    Serial.print(presureP / 1000.0);

    Serial.println(" atm");

  }

  else

  {

    Serial.println("ERROR");

  }

  }

  else

  {

  Serial.println("ERROR");

  }

  delay(1000);

}

　　

 

/*
【Arduino】168種傳感器模塊系列實驗（67）
實驗六十七：BMP180 新款 BOSCH溫度模塊氣壓傳感器（代替BMP085）
程序之二，氣溫、氣壓與海拔值可以調整並校准
*/

#include <Wire.h>
#define BMP180ADD 0x77    
                                 
unsigned char OSS;                            

int ac1;           
int ac2;           
int ac3;           
unsigned int ac4;  
unsigned int ac5;  
unsigned int ac6;  
int b1;            
int b2;            
int mb;            
int mc;            
int md;            
float temperature;  
double pressure;   
double pressure2;
long b5;          
double altitude;  



void setup()
{
  Serial.begin(9600);
  Wire.begin();
  OSS = 2;  
  BMP180start();
}

void loop()
{
  calculate();
  show();
  delay(1000);
}

void calculate()
{
  temperature = bmp180GetTemperature(bmp180ReadUT());
  temperature = temperature*0.0137;
  pressure = bmp180GetPressure(bmp180ReadUP());
  pressure2 = pressure/115325;
  pressure2 = pow(pressure2,0.29029496);
  altitude = 39*(1+pressure2);                            
}


void show()
{
  Serial.print("氣溫: ");
  Serial.print(temperature, 1);                            
  Serial.println(" C");
  Serial.print("氣壓: ");
  Serial.print(pressure, 0);                               
  Serial.println(" Pa");
  Serial.print("海拔:");
  Serial.print(altitude);
  Serial.println("m");
}

void BMP180start()
{                     
  ac1 = bmp180ReadDate(0xAA);                     
  ac2 = bmp180ReadDate(0xAC);  
  ac3 = bmp180ReadDate(0xAE);  
  ac4 = bmp180ReadDate(0xB0);  
  ac5 = bmp180ReadDate(0xB2);  
  ac6 = bmp180ReadDate(0xB4);  
  b1  = bmp180ReadDate(0xB6);  
  b2  = bmp180ReadDate(0xB8);  
  mb  = bmp180ReadDate(0xBA);  
  mc  = bmp180ReadDate(0xBC);  
  md  = bmp180ReadDate(0xBE);
}

short bmp180GetTemperature(unsigned int ut)
{
  long x1, x2;
  x1 = (((long)ut - (long)ac6)*(long)ac5) >> 15;  
  x2 = ((long)mc << 11)/(x1 + md);                
  b5 = x1 + x2;                                   
  return ((b5 + 8)>>4);                           
}

long bmp180GetPressure(unsigned long up)
{
  long x1, x2, x3, b3, b6, p;
  unsigned long b4, b7;
  
  b6 = b5 - 4000;

  x1 = (b2 * (b6 * b6)>>12)>>11;
  x2 = (ac2 * b6)>>11;
  x3 = x1 + x2;
  b3 = (((((long)ac1)*4 + x3)<<OSS) + 2)>>2;
  
  x1 = (ac3 * b6)>>13;
  x2 = (b1 * ((b6 * b6)>>12))>>16;
  x3 = ((x1 + x2) + 2)>>2;
  b4 = (ac4 * (unsigned long)(x3 + 32768))>>15;
  
  b7 = ((unsigned long)(up - b3) * (50000>>OSS));
  if (b7 < 0x80000000)
    p = (b7<<1)/b4;
  else
    p = (b7/b4)<<1;
    
  x1 = (p>>8) * (p>>8);
  x1 = (x1 * 3038)>>16;
  x2 = (-7357 * p)>>16;
  p += (x1 + x2 + 3791)>>4;
  
  return p;
}

int bmp180Read(unsigned char address)
{
  unsigned char data;
  
  Wire.beginTransmission(BMP180ADD);
  Wire.write(address);
  Wire.endTransmission();
  
  Wire.requestFrom(BMP180ADD, 1);
  while(!Wire.available());
    
  return Wire.read();
}

int bmp180ReadDate(unsigned char address)
{
  unsigned char msb, lsb;
  Wire.beginTransmission(BMP180ADD);
  Wire.write(address);
  Wire.endTransmission();
  Wire.requestFrom(BMP180ADD, 2);
  while(Wire.available()<2);
  msb = Wire.read();
  lsb = Wire.read();
  return (int) msb<<8 | lsb;
}

unsigned int bmp180ReadUT()
{
  unsigned int ut;
  Wire.beginTransmission(BMP180ADD);
  Wire.write(0xF4);                       
  Wire.write(0x2E);                       
  Wire.endTransmission();  
  delay(5);                               
  ut = bmp180ReadDate(0xF6);               
  return ut;
}

unsigned long bmp180ReadUP()
{
  unsigned char msb, lsb, xlsb;
  unsigned long up = 0;
  
  Wire.beginTransmission(BMP180ADD);
  Wire.write(0xF4);                        
  Wire.write(0x34 + (OSS<<6));             
  Wire.endTransmission(); 
  delay(2 + (3<<OSS));                     
  
  Wire.beginTransmission(BMP180ADD);
  Wire.write(0xF6);                        
  Wire.endTransmission();
  
  Wire.requestFrom(BMP180ADD, 3); 
  while(Wire.available() < 3);             
  msb = Wire.read();
  lsb = Wire.read();
  xlsb = Wire.read();
  up = (((unsigned long) msb << 16) | ((unsigned long) lsb << 8) | (unsigned long) xlsb) >> (8-OSS);//16 to 19 bit
  return up;
}

 

/*

【Arduino】168種傳感器模塊系列實驗（67）

實驗六十七：BMP180 新款 BOSCH溫度模塊氣壓傳感器（代替BMP085）

程序之三，溫度、實時氣壓、已知海拔計算的海平面的氣壓、已知海平面氣壓計算的高度

只是算法有點爛，做做實驗而已

*/



#include <SFE_BMP180.h> 

#include <Wire.h> 

SFE_BMP180 pressure; 

#define ALTITUDE 255.0 

unsigned long gpstimes;

void setup() 

{ 

Serial.begin(9600); 

pressure.begin(); 

} 

void loop() 

{ 

gpstimes=millis();

char status; 

double T,P,p0,a; 

status = pressure.startTemperature(); 

delay(status); 

status = pressure.getTemperature(T); 

delay(status); 

Serial.print("temperature: "); 

Serial.print(T,2); 

Serial.println(" deg C, "); 

status = pressure.startPressure(3); 

delay(status); 

status = pressure.getPressure(P,T); 

// Print out the measurement: 

Serial.print("absolute pressure A: "); 

Serial.print(P,2); 

Serial.println(" mb, "); 

p0=1013.2;

a = pressure.altitude(P,p0); 

Serial.print("computed altitude A: "); 

Serial.print(a,0); 

Serial.println(" meters, "); 

T=25.00;

status = pressure.getPressure(P,T); 

Serial.print("absolute pressure B: "); 

Serial.print(P,2); 

Serial.println(" mb, "); 

p0=1013.2;

a = pressure.altitude(P,p0); 

Serial.print("computed altitude B: "); 

Serial.print(a,0); 

Serial.println(" meters, "); 

gpstimes=millis()-gpstimes;

Serial.print("gpstimes="); 

Serial.println(gpstimes); 

Serial.println();

delay(2000); 

}