Ubuntu 18.04 安裝 Digilent Cable Driver

Ubuntu 18.04 安裝 Vivado 2018.2，默認不會安裝 Cable Driver，導致 JTAG 不能正確識別芯片，要手動安裝。

Driver 在 Vivado 安裝目錄下，例如，我將 Vivado 安裝在 /op/ 下，則 Driver 路徑為，

/opt/Xilinx/SDK/2018.2/data/xicom/cable_drivers/lin64/install_script/install_drivers

如下直接執行安裝，重新拔插 cable 即可正常識別，

$ sudo ./install_drivers
INFO: Installing cable drivers.
INFO: Script name = ./install_drivers
INFO: HostName = Rescuer
INFO: Current working dir = /opt/install_script/install_drivers
INFO: Kernel version = 5.3.0-41-generic.
INFO: Arch = x86_64.
Successfully installed Digilent Cable Drivers
--File /etc/udev/rules.d/52-xilinx-ftdi-usb.rules does not exist.
--File version of /etc/udev/rules.d/52-xilinx-ftdi-usb.rules = 0000.
--Updating rules file.
--File /etc/udev/rules.d/52-xilinx-pcusb.rules does not exist.
--File version of /etc/udev/rules.d/52-xilinx-pcusb.rules = 0000.
--Updating rules file.

INFO: Digilent Return code = 0
INFO: Xilinx Return code = 0
INFO: Xilinx FTDI Return code = 0
INFO: Return code = 0
INFO: Driver installation successful.
CRITICAL WARNING: Cable(s) on the system must be unplugged then plugged back in order for the driver scripts to update the cables.

 

參考 Xilinx 官方AR (比較陳舊，適當參考即可) https://www.xilinx.com/support/answers/54381.html

 

完。