個人之前總結過兩篇文章“MySQL更改數據庫數據存儲目錄”和“Ubuntu上更改MySQL數據庫數據存儲目錄”，都是在工作中遇到相關案例后的一個簡單總結。當初的經驗不足，認知有限，所以現在來看來，當初的博文確實顯得淺析和不夠全面，這個也沒有辦法，當時有些環境或案例沒有涉及過，所以文章很難面面俱到，略顯單薄和淺顯，這個也很正常。博客不是論文，只是個人的筆記和知識點的總結。而且是基於當時的認知的經驗總結和知識概括。前陣子將監控工具DPA的數據庫切換為MySQL時，又遇到了這個問題，遂總結一下。
系統環境 ： CentOS Linux release 7.5.1804 (Core)
MySQL版本 ： 8.0.18 MySQL Community Server - GPL
默認情況下，MySQL的數據目錄一般位於/var/lib/mysql下
1：首先，弄清楚MySQL的相關配置信息
找到MySQL的數據目錄，以及配置文件my.cnf、錯誤日志的位置。
mysql> show variables like 'datadir%';
+---------------+-----------------+
| Variable_name | Value |
+---------------+-----------------+
| datadir | /var/lib/mysql/ |
+---------------+-----------------+
1 row in set (0.03 sec)
mysql> show variables like 'log_error';
+---------------+---------------------+
| Variable_name | Value |
+---------------+---------------------+
| log_error | /var/log/mysqld.log |
+---------------+---------------------+
1 row in set (0.01 sec)
mysql>
[root@KerryDB ~]# whereis my.cnf
my: /etc/my.cnf
2：對數據庫做一個冷備份，以備不時之需。當然，你以可以用其它方式備份。
[root@KerryDB ~]# service mysqld stop
Redirecting to /bin/systemctl stop mysqld.service
[root@KerryDB ~]# cp -rp /var/lib/mysql /tmp/coldbackup
3：移動數據目錄到其它目錄
這里假設，我需要將數據庫的數據目錄遷移到/mysql_data/下。
[root@KerryDB ~]# chown -R mysql:mysql /mysql_data/
[root@KerryDB ~]# cd /var/lib
[root@KerryDB lib]# mv mysql /mysql_data/
注意：這里建議使用mv移動數據庫目錄，而是不是復制（cp命令），因為執行復制時，SELinux上下文將丟失，並且您稍后必須手動進行設置，如果你使用cp命令復制文件，如果沒有使用參數-p，那么要記得修改目錄的屬主，否則你有可能遇到“MySQL error: 1017 Can’t find file: (errno: 13)”這樣的錯誤。
mv 與cp的區別
4：修改配置文件my.cnf
一般情況下，只需修改datadir和socket等參數，具體根據你實際情況來判斷那些參數需要修改。
#datadir=/var/lib/mysql
#socket=/var/lib/mysql/mysql.sock
datadir=/mysql_data/mysql
socket=/mysql_data/mysql/mysql.sock
修改過后，對於CentOS或RHEL操作系統而言，你可能需要修改SELinux的設置，而對於Ubuntu或Debian，你需要修改AppArmor的設置（這篇Ubuntu上更改MySQL數據庫數據存儲目已經有介紹了，這里就不重復了）。當如，對於CentOS或RHEL，如果你禁用了SELinux的話，那么就可以直接忽略這個設置，因為禁用SELinux的話，就會避免很多雜七雜八的問題，但是我們不是要回避問題，而是要弄清楚問題產生的根本原因。
首先你要檢查，是否開啟了SELinux。如下所示：
[root@KerryDB ~]# /usr/sbin/sestatus
SELinux status: enabled
SELinuxfs mount: /sys/fs/selinux
SELinux root directory: /etc/selinux
Loaded policy name: targeted
Current mode: enforcing
Mode from config file: enforcing
Policy MLS status: enabled
Policy deny_unknown status: allowed
Max kernel policy version: 31
[root@KerryDB ~]# getenforce
Enforcing
如果SELinux是開啟狀態，那么此時如果不做一些配置，那么啟動MySQL服務，就會遇到類似下面這樣的錯誤：
[root@KerryDB ~]# systemctl status mysqld.service
● mysqld.service - MySQL Server
Loaded: loaded (/usr/lib/systemd/system/mysqld.service; enabled; vendor preset: disabled)
Active: failed (Result: exit-code) since Mon 2020-03-09 15:43:06 +08; 2min 54s ago
Docs: man:mysqld(8)
http://dev.mysql.com/doc/refman/en/using-systemd.html
Process: 14903 ExecStart=/usr/sbin/mysqld $MYSQLD_OPTS (code=exited, status=1/FAILURE)
Process: 14879 ExecStartPre=/usr/bin/mysqld_pre_systemd (code=exited, status=0/SUCCESS)
Main PID: 14903 (code=exited, status=1/FAILURE)
Status: "Server startup in progress"
Error: 13 (Permission denied)
Mar 09 15:43:06 KerryDB systemd[1]: Starting MySQL Server...
Mar 09 15:43:06 KerryDB systemd[1]: mysqld.service: main process exited, code=exited, status=1/FAILURE
Mar 09 15:43:06 KerryDB systemd[1]: Failed to start MySQL Server.
Mar 09 15:43:06 KerryDB systemd[1]: Unit mysqld.service entered failed state.
Mar 09 15:43:06 KerryDB systemd[1]: mysqld.service failed.
[root@KerryDB ~]# journalctl -xe
Mar 09 15:39:05 KerryDB polkitd[731]: Registered Authentication Agent for unix-process:14836:224127979 (system bus name :1.1355 [/usr/bin/pkttyagent --notify
Mar 09 15:39:05 KerryDB systemd[1]: Stopping MySQL Server...
-- Subject: Unit mysqld.service has begun shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit mysqld.service has begun shutting down.
Mar 09 15:39:07 KerryDB systemd[1]: Stopped MySQL Server.
-- Subject: Unit mysqld.service has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit mysqld.service has finished shutting down.
Mar 09 15:39:07 KerryDB polkitd[731]: Unregistered Authentication Agent for unix-process:14836:224127979 (system bus name :1.1355, object path /org/freedeskt
Mar 09 15:43:06 KerryDB polkitd[731]: Registered Authentication Agent for unix-process:14863:224152052 (system bus name :1.1356 [/usr/bin/pkttyagent --notify
Mar 09 15:43:06 KerryDB systemd[1]: Starting MySQL Server...
-- Subject: Unit mysqld.service has begun start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit mysqld.service has begun starting up.
Mar 09 15:43:06 KerryDB systemd[1]: mysqld.service: main process exited, code=exited, status=1/FAILURE
Mar 09 15:43:06 KerryDB systemd[1]: Failed to start MySQL Server.
-- Subject: Unit mysqld.service has failed
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit mysqld.service has failed.
--
-- The result is failed.
Mar 09 15:43:06 KerryDB systemd[1]: Unit mysqld.service entered failed state.
Mar 09 15:43:06 KerryDB systemd[1]: mysqld.service failed.
Mar 09 15:43:06 KerryDB polkitd[731]: Unregistered Authentication Agent for unix-process:14863:224152052 (system bus name :1.1356, object path /org/freedeskt
lines 4369-4401/4401 (END)
上面日志看不到細節錯誤信息，此時，應該檢查錯誤日志/var/log/mysqld.log， 如下所示，你會看到“OS errno 13 - Permission denied”和“Can't create test file xxx"類似這樣的錯誤
mysqld: File './binlog.~rec~' not found (OS errno 13 - Permission denied)
2020-03-09T07:43:06.927360Z 0 [Warning] [MY-010091] [Server] Can't create test file /mysql_data/mysql/mysqld_tmp_file_case_insensitive_test.lower-test
2020-03-09T07:43:06.927453Z 0 [System] [MY-010116] [Server] /usr/sbin/mysqld (mysqld 8.0.18) starting as process 14903
2020-03-09T07:43:06.929669Z 0 [Warning] [MY-010091] [Server] Can't create test file /mysql_data/mysql/mysqld_tmp_file_case_insensitive_test.lower-test
2020-03-09T07:43:06.929681Z 0 [Warning] [MY-010159] [Server] Setting lower_case_table_names=2 because file system for /mysql_data/mysql/ is case insensitive
2020-03-09T07:43:06.930542Z 0 [ERROR] [MY-010846] [Server] MYSQL_BIN_LOG::open_purge_index_file failed to open register file.
2020-03-09T07:43:06.930594Z 0 [ERROR] [MY-010817] [Server] MYSQL_BIN_LOG::open_index_file failed to sync the index file.
2020-03-09T07:43:06.930657Z 0 [ERROR] [MY-010119] [Server] Aborting
2020-03-09T07:43:06.930830Z 0 [System] [MY-010910] [Server] /usr/sbin/mysqld: Shutdown complete (mysqld 8.0.18) MySQL Community Server - GPL.
注意：默認情況下，日志里面的時間是UTC時間，而不是本地時間。除非你設置過。具體參考我的博客“MySQL5.7參數log_timestamps”。
此時如果，你用chcon命令來在新目錄中更改SELinux上下文類型，我看有些博客介紹就OK了。但是在我這個環境中，這樣處理過后依然報同樣的錯誤
[root@KerryDB ~]# chcon -R -t mysqld_db_t /mysql_data/
[root@KerryDB ~]#
折騰測試后，發現此時需要在file_contexts里面修改mysqld_db_t，如下所示：
[root@KerryDB ~]# cd /etc/selinux/targeted/contexts/files/
[root@KerryDB files]# ls -lrt
修改前：
/var/lib/mysql(-files|-keyring)?(/.*)? system_u:object_r:mysqld_db_t:s0
修改后：
/mysql_data/mysql(-files|-keyring)?(/.*)? system_u:object_r:mysqld_db_t:s0
其實使用chcon修改對象（文件）的安全上下文，相當難掌握，有點難度，除非你是Linux高手，一般用工具semanage對默認目錄的安全上下文查詢與修改
一般默認可能沒有安裝policycoreutils-python，需要安裝對應組件
#yum -y install policycoreutils-python
如果你要查看MySQL相關文件的設置，那么可以用semanage fcontext -l | grep -i mysql查看。
root@KerryDB ~]# semanage fcontext -l | grep -i mysql
/usr/lib(64)?/nagios/plugins/check_mysql regular file system_u:object_r:nagios_services_plugin_exec_t:s0
/usr/lib(64)?/nagios/plugins/check_mysql_query regular file system_u:object_r:nagios_services_plugin_exec_t:s0
/etc/mysql(/.*)? all files system_u:object_r:mysqld_etc_t:s0
/etc/my\.cnf\.d(/.*)? all files system_u:object_r:mysqld_etc_t:s0
/var/log/mysql.* regular file system_u:object_r:mysqld_log_t:s0
/var/lib/mysql(-files|-keyring)?(/.*)? all files system_u:object_r:mysqld_db_t:s0
/var/run/mysqld(/.*)? all files system_u:object_r:mysqld_var_run_t:s0
/var/log/mariadb(/.*)? all files system_u:object_r:mysqld_log_t:s0
/var/run/mariadb(/.*)? all files system_u:object_r:mysqld_var_run_t:s0
/usr/sbin/mysqld(-max)? regular file system_u:object_r:mysqld_exec_t:s0
/var/run/mysqld/mysqlmanager.* regular file system_u:object_r:mysqlmanagerd_var_run_t:s0
/usr/lib/systemd/system/mysqld.* regular file system_u:object_r:mysqld_unit_file_t:s0
/usr/share/munin/plugins/mysql_.* regular file system_u:object_r:services_munin_plugin_exec_t:s0
/usr/lib/systemd/system/mariadb.* regular file system_u:object_r:mysqld_unit_file_t:s0
/etc/my\.cnf regular file system_u:object_r:mysqld_etc_t:s0
/root/\.my\.cnf regular file system_u:object_r:mysqld_home_t:s0
/usr/sbin/ndbd regular file system_u:object_r:mysqld_exec_t:s0
/usr/libexec/mysqld regular file system_u:object_r:mysqld_exec_t:s0
/usr/bin/mysqld_safe regular file system_u:object_r:mysqld_safe_exec_t:s0
/usr/bin/mysql_upgrade regular file system_u:object_r:mysqld_exec_t:s0
/usr/sbin/mysqlmanager regular file system_u:object_r:mysqlmanagerd_exec_t:s0
/etc/rc\.d/init\.d/mysqld regular file system_u:object_r:mysqld_initrc_exec_t:s0
/var/lib/mysql/mysql\.sock socket system_u:object_r:mysqld_var_run_t:s0
/usr/bin/mysqld_safe_helper regular file system_u:object_r:mysqld_exec_t:s0
/usr/sbin/zabbix_proxy_mysql regular file system_u:object_r:zabbix_exec_t:s0
/etc/rc\.d/init\.d/mysqlmanager regular file system_u:object_r:mysqlmanagerd_initrc_exec_t:s0
/usr/sbin/zabbix_server_mysql regular file system_u:object_r:zabbix_exec_t:s0
/usr/libexec/mysqld_safe-scl-helper regular file system_u:object_r:mysqld_safe_exec_t:s0
/home/[^/]+/\.my\.cnf
[root@KerryDB ~]# semanage fcontext -a -t mysqld_db_t "/mysql_data/mysql(/.*)?"
[root@KerryDB ~]# restorecon -Rv /mysql_data/mysql
restorecon reset /mysql_data/mysql context system_u:object_r:default_t:s0->system_u:object_r:mysqld_db_t:s0
此時啟動MySQL實例就正常了，關於semanage修改目錄或文件安全上下文的更多信息，參考資料有，可以移步那里去學習。
# service mysqld start
Redirecting to /bin/systemctl start mysqld.service
此時，你如果用MySQL客戶端工具登錄數據庫，就會遇到"Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock'"
[root@KerryDB mysql]# mysql -u root -p
Enter password:
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2)
解決下面錯誤的方法：
1：在連接MySQL時，指定參數--socket的值
[root@KerryDB mysql]# mysql -u root -p --socket=/mysql_data/mysql/mysql.sock
Enter password:
Welcome to the MySQL monitor. Commands end with ; or \g.
Your MySQL connection id is 8
Server version: 8.0.18 MySQL Community Server - GPL
Copyright (c) 2000, 2019, Oracle and/or its affiliates. All rights reserved.
Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.
Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.
mysql>
2：修改配置文件my.cnf，增加客戶端參數socket
[client]
socket=/mysql_data/mysql/mysql.sock
注意這個socket參數，跟mysqld下的參數socket是有所區別的。
[client]
socket=/mysql_data/mysql/mysql.sock
[mysqld]
datadir=/mysql_data/mysql
socket=/mysql_data/mysql/mysql.sock
其實這種方法是最簡單，最有效的一個方法。
3：可以通過建立mysql.sock文件的軟連接
另外，我嘗試通過修改Unix-domain Socket 上下文來解決這個問題，但是沒有解決，不知是我理解有誤，還是其它方面原因。 下面是部分測試內容：
# semanage fcontext -a -t mysqld_var_run_t "/mysql_data/mysql/mysql\.sock"
# restorecon -Rv /mysql_data/mysql/mysql.sock
# mysql -u root -p
Enter password:
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2)
依然報錯，檢查semanage fcontext -l | grep -i mysql 如下所示， 由於對SELinux的知識了解不夠深入，暫時還在學習中。臨時先記錄一下，留待以后解決。
# semanage fcontext -l | grep -i mysql
參考資料：
https://dev.mysql.com/doc/refman/5.6/en/can-not-connect-to-server.html
https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/7/html/selinux_users_and_administrators_guide/sect-security-enhanced_linux-working_with_selinux-selinux_contexts_labeling_files