MMDVM中繼板測試軟件MMDVMCal


運行方法:

只支持windows 64位系統

32位下載:https://share.weiyun.com/52uHAO5

64位下載:https://share.weiyun.com/5IgdqvL

mmdvmcal.exe \\.\com18

 

com18是端口號,每台電腦都不同,比如在設備管理器看到是串口8改為8即可

 

按b是測試DMR的誤碼率,默認接收頻率433mhz

 

This is the calibration program to be used with the MMDVM and MMDVM_HS. It is started by
adding the serial port onto the command line. On Windows the serial port must be
prefixed with \.\ as in \.\COM4 to be valid. Once started the program takes
the following commands:

  • MMDVM:
Command Description
H/h Display help
Q/q Quit
W/w Enable/disable modem debug messages
I Toggle transmit inversion
i Toggle receive inversion
O Increase TX DC offset level
o Decrease TX DC offset level
C Increase RX DC offset level
c Decrease RX DC offset level
P/p Toggle PTT inversion
R Increase receive level
r Decrease receive level
T Increase transmit level
t Decrease transmit level
d D-Star mode
D Set DMR Deviation Mode. Generates a 1.2Khz Sinewave. Set radio for 2.75 Khz Deviation
L/l DMR Low Frequency Mode (80 Hz square wave)
A DMR Duplex 1031 Hz Test Pattern (TS2 CC1 ID1 TG9)
M/m DMR Simplex 1031 Hz Test Pattern (CC1 ID1 TG9)
a P25 1011 Hz Test Pattern (NAC293 ID1 TG1)
N NXDN 1031 Hz Test Pattern (RAN1 ID1 TG1)
K/k BER Test Mode (FEC) for D-Star
b BER Test Mode (FEC) for DMR Simplex (CC1)
B BER Test Mode (1031 Hz Test Pattern) for DMR Simplex (CC1 ID1 TG9)
J BER Test Mode (FEC) for YSF
j BER Test Mode (FEC) for P25
n BER Test Mode (FEC) for NXDN
g POCSAG 600Hz Test Pattern
S/s RSSI Mode
V/v Display version of MMDVMCal
<space> Toggle transmit
  • MMDVM_HS:

 

Command Description
H/h Display help
Q/q Quit
W/w Enable/disable modem debug messages
E/e Enter frequency
F Increase frequency
f Decrease frequency
Z/z Enter frequency step
T Increase deviation
t Decrease deviation
P Increase RF power
p Decrease RF power
C/c Carrier Only Mode
D/d DMR Deviation Mode
M/m DMR Simplex 1031 Hz Test Pattern (CC1 ID1 TG9)
K/k BER Test Mode (FEC) for D-Star
b BER Test Mode (FEC) for DMR Simplex (CC1)
B BER Test Mode (1031 Hz Test Pattern) for DMR Simplex (CC1 ID1 TG9)
J BER Test Mode (FEC) for YSF
j BER Test Mode (FEC) for P25
n BER Test Mode (FEC) for NXDN
g POCSAG 600Hz Test Pattern
S/s RSSI Mode
I/i Interrupt Counter Mode
V/v Display version of MMDVMCal
<space> Toggle transmit


免責聲明!

本站轉載的文章為個人學習借鑒使用,本站對版權不負任何法律責任。如果侵犯了您的隱私權益,請聯系本站郵箱yoyou2525@163.com刪除。



 
粵ICP備18138465號   © 2018-2025 CODEPRJ.COM