NX二次開發-NXOpen C# UF函數例子目錄【更新日期2020.7.21】

NxOpenC# UF Example

1	使用NXOPEN C#向導模板做開發以及如何查看C#幫助文檔寫代碼	https://www.cnblogs.com/nxopen2018/p/12310032.html
2	NXOPEN C#項目如何設斷點調試代碼	https://www.cnblogs.com/nxopen2018/category/1658106.html
3	基於Winform界面對話框與NXOPEN C#交互的開發	https://www.cnblogs.com/nxopen2018/p/12387596.html
4	C#開發中Tag對象與TaggedObject對象轉換方法	https://www.cnblogs.com/nxopen2018/p/13184940.html
Modl模型創建與查詢
1	創建塊theUfSession.Modl.CreateBlock1	https://www.cnblogs.com/nxopen2018/p/12313437.html
2	創建圓柱theUfSession.Modl.CreateCyl1	https://www.cnblogs.com/nxopen2018/p/12313802.html
3	特征找體theUfSession.Modl.AskFeatBody	https://www.cnblogs.com/nxopen2018/p/12313956.html
4	創建鏈表theUfSession.Modl.CreateList	https://www.cnblogs.com/nxopen2018/p/13199842.html
5	插入對象到鏈表theUfSession.Modl.PutListItem	https://www.cnblogs.com/nxopen2018/p/13199847.html
6	創建拉伸theUfSession.Modl.CreateExtruded	https://www.cnblogs.com/nxopen2018/p/13199860.html
7	布爾求交theUfSession.Modl.IntersectBodies	https://www.cnblogs.com/nxopen2018/p/13199887.html
8	獲得兩個圓曲線的兩個交點theUfSession.Modl.IntersectCurveToCurve	https://www.cnblogs.com/nxopen2018/p/13199892.html
ObjNX對象與屬性
1	設置顏色theUfSession.Obj.SetColor	https://www.cnblogs.com/nxopen2018/p/12313969.html
2	遍歷函數theUfSession.Obj.CycleObjsInPart	https://www.cnblogs.com/nxopen2018/p/13184730.html
3	設置透明度theUfSession.Obj.SetTranslucency	https://www.cnblogs.com/nxopen2018/p/13199861.html

 

UF_CSYS坐標系操作

1	獲取WCS theUfSession.Csys.AskCsysInfo	https://www.cnblogs.com/nxopen2018/p/13199796.html
2	獲取WCS的矩陣和原點theUfSession.Csys.AskCsysInfo	https://www.cnblogs.com/nxopen2018/p/13199824.html

 

 

UF_CURVE曲線和點

1	創建圓弧theUfSession.Curve.CreateArc	https://www.cnblogs.com/nxopen2018/p/13199835.html
2	三點創建圓弧theUfSession.Curve.CreateArcThru3pts	https://www.cnblogs.com/nxopen2018/p/13199905.html
3	創建點theUfSession.Curve.CreatePoint	https://www.cnblogs.com/nxopen2018/p/13199949.html

 

 

UF_UI界面相關

1	點構造器theUfSession.Ui.PointConstruct	https://www.cnblogs.com/nxopen2018/p/13358098.html
2	UI加鎖theUfSession.Ui.LockUgAccess	https://www.cnblogs.com/nxopen2018/p/13358098.html
3	UI解鎖theUfSession.Ui.UnlockUgAccess	https://www.cnblogs.com/nxopen2018/p/13358098.html

 

 

 

NX二次開發-NXOPEN C# WinForm點構造器UF.Ui.PointConstruct和UI加鎖解鎖UF.Ui.LockUgAccess