oracle rac 添加SCAN IP

因現場應用需要，需要對新配置的oracle RAC環境增配2個scanIP地址，10.138.129.106以及10.138.129.107。

       配置前情況：

      [grid@db1 ~]$ srvctl config scan                    ----查看scan的配置信息
      SCAN name: scan-ip, Network: 1/10.138.129.0/255.255.255.0/eth2
      SCAN VIP name: scan1, IP: /scan-ip/10.138.129.105

      [grid@db1 ~]$ srvctl status scan                    ----查看scan的狀態以及scan ip所處節點
      SCAN VIP scan1 is enabled
      SCAN VIP scan1 is running on node db1

      [grid@db1 ~]$ srvctl config scan_listener    ----查看scan listener
      SCAN Listener LISTENER_SCAN1 exists. Port: TCP:1521

      默認情況下配置RAC 只有1個scan IP，1個 scan listener。

      進入主題，開始增配scan ip

      1、修改rac所有節點的/etc/hosts信息

[grid@db1 ~]$ cat /etc/hosts
127.0.0.1   localhost


10.138.129.101 db1
10.138.129.102 db2

10.138.129.103 db1-vip
10.138.129.104 db2-vip

10.138.129.105 scan-ip
10.138.129.106    scan-ip              ---------新增的scanIP
10.138.129.107   scan-ip              ---------新增的scanIP

192.168.20.1 db1-priv
192.168.20.2 db2-priv

       2、停止scan 監聽，注意先聽監聽才能停scan

[grid@db1 ~]$ srvctl stop scan_listener

[grid@db1 ~]$ srvctl stop scan

[grid@db1 ~]$srvctl status scan_listener
SCAN Listener LISTENER_SCAN1 is enabled
SCAN listener LISTENER_SCAN1 is not running

      3、配置scan，注意需要用root權限執行

[root@db1 bin]# pwd
/u01/app/11.2.0/grid/bin
[root@db1 bin]# ./srvctl modify scan -n scan-ip     -----修改scan信息，-n 后面接 hosts中的san ip 網絡名

[root@db1 bin]# ./srvctl modify scan_listener -u   ------添加scanIP的監聽，若不執行該命令，將只有一個listener_scan1監聽，執行后將根據scan ip數自動增加listener_scan2，listener_scan3.

     4、啟動scan

[grid@db1 ~]$ srvctl start scan
[grid@db1 ~]$ srvctl start scan_listener

[grid@db1 ~]$ srvctl status scan
SCAN VIP scan1 is enabled
SCAN VIP scan1 is running on node db1
SCAN VIP scan2 is enabled
SCAN VIP scan2 is running on node db2
SCAN VIP scan3 is enabled
SCAN VIP scan3 is running on node db1

[grid@db1 ~]$ srvctl config scan
SCAN name: scan-ip, Network: 1/10.138.129.0/255.255.255.0/eth2
SCAN VIP name: scan1, IP: /scan-ip/10.138.129.105
SCAN VIP name: scan2, IP: /scan-ip/10.138.129.106
SCAN VIP name: scan3, IP: /scan-ip/10.138.129.107

[grid@db1 ~]$ srvctl status scan_listener
SCAN Listener LISTENER_SCAN1 is enabled
SCAN listener LISTENER_SCAN1 is running on node db1
SCAN Listener LISTENER_SCAN2 is enabled
SCAN listener LISTENER_SCAN2 is running on node db2
SCAN Listener LISTENER_SCAN3 is enabled
SCAN listener LISTENER_SCAN3 is running on node db1
————————————————
版權聲明：本文為CSDN博主「orabing」的原創文章，遵循 CC 4.0 BY-SA 版權協議，轉載請附上原文出處鏈接及本聲明。
原文鏈接：https://blog.csdn.net/orabing/article/details/53371010