一步一步解決centos6.5配置無線網卡的問題

1、配置本地yum源

[local]
name=local
baseurl=file:///mnt/cdrom
enable=1
gpgcheck=0

 

2、安裝libnl

rpm -ivh /mnt/cdrom/Packages/libnl-1.1.4-2.el6.x86_64.rpm

 

3、安裝wpa_supplicant

rpm -ivh /mnt/cdrom/Packages/wpa_supplicant-0.7.3-4.el6_3.x86_64.rpm

 

4、修改wpa_supplicant配置文件

 

vim /etc/sysconfig/wpa_supplicant

INTERFACES="-iwlan0"

# Use the flag "-D" before each driver, like so:
# DRIVERS="-Dwext"
DRIVERS="-iDwext"

 

6、確定網卡類型

03:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter [10ec:8176] (rev 01)

 

 

7、確認是否有無線網卡驅動，如果輸出如下，則證明沒有無線網卡驅動

[root@test data]# iwconfig
lo no wireless extensions.


eth0 no wireless extensions.

 

8、安裝網卡驅動確定系統內核版本

[root@test rtl8192ce_linux_2.6.0005.1116.2010]# uname -r
2.6.32-431.el6.x86_64

 

9、下載對應的網卡驅動，編譯安裝

root@test rtl8192ce_linux_2.6.0005.1116.2010]# make
make: *** /lib/modules/2.6.32-431.el6.x86_64/build: No such file or directory. Stop.
make: *** [all] Error 2

 

10、如何輸出上面的步驟，則需要安裝kernel-devel

yum install kernel-devel -y

 

11、先做清理

make clean

 

12、安裝gcc

[root@test rtl8192ce_linux_2.6.0005.1116.2010]# make
expr: syntax error
make[1]: Entering directory `/usr/src/kernels/2.6.32-431.el6.x86_64'
/usr/src/kernels/2.6.32-431.el6.x86_64/arch/x86/Makefile:81: stack protector enabled but no compiler support
make[1]: gcc: Command not found

 

13、再次編譯make，輸出如下，則編譯通過

CC [M] /data/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/../../rtllib/rtllib_crypt_wep.o
LD [M] /data/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/r8192ce_pci.o
Building modules, stage 2.
MODPOST 1 modules
CC /data/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/r8192ce_pci.mod.o
LD [M] /data/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/r8192ce_pci.ko.unsigned
NO SIGN [M] /data/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/r8192ce_pci.ko
make[1]: Leaving directory `/usr/src/kernels/2.6.32-431.el6.x86_64'

 

 

14、編譯安裝

[root@test rtl8192ce_linux_2.6.0005.1116.2010]# make install
make[1]: Entering directory `/usr/src/kernels/2.6.32-431.el6.x86_64'
Building modules, stage 2.
MODPOST 1 modules
make[1]: Leaving directory `/usr/src/kernels/2.6.32-431.el6.x86_64'
make[1]: Entering directory `/data/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192'
make -C /lib/modules/2.6.32-431.el6.x86_64/build M=/data/rtl8192ce_linux_2.6.0005.1116.2010 CC=gcc modules
make[2]: Entering directory `/usr/src/kernels/2.6.32-431.el6.x86_64'
Building modules, stage 2.
MODPOST 0 modules
make[2]: Leaving directory `/usr/src/kernels/2.6.32-431.el6.x86_64'
find /lib/modules/2.6.32-431.el6.x86_64 -name "r8192ce_*.ko" -exec ls -l {} \;
find /lib/modules/2.6.32-431.el6.x86_64 -name "r8192ce_*.ko" -exec rm {} \;
install -p -m 644 r8192ce_pci.ko /lib/modules/2.6.32-431.el6.x86_64/kernel/drivers/net/wireless/
depmod -a
make[1]: Leaving directory `/data/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192'

 

15、重啟檢查無線網卡已經ok

[root@test ~]# iwconfig
lo no wireless extensions.

wlan0 802.11bgn ESSID:"HUAWEI-V4XJHU" Nickname:"rtl8192CE"
Mode:Managed Frequency=2.462 GHz Access Point: C8:14:51:A7:D2:18
Bit Rate=150 Mb/s
Retry:on RTS thr:off Fragment thr:off
Encryption key:C454-4CC5-9324-1F9D-AEF0-C306-5DE0-F0FC Security mode:open
Power Management:off
Link Quality=100/100 Signal level=-45 dBm Noise level=-120 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0

eth0 no wireless extensions.