Job for network.service failed because the control process exited with error code問題

因為是克隆的,所以需要重新修改靜態IP

vim /etc/sysconfig/network-scripts/ifcfg-xxx

修改

BOOTPROTO=static 

下方添加

IPADDR=靜態IP地址
GATEWAY=默認網關
NETMASK=255.255.255.0
DNS1=114.114.114.114

保存之后執行

systemctl restart network

結果報錯了

Job for network.service failed because the control process exited with error code. See "systemctl status network.service" and "journalctl -xe" for details.

這時候就糾結了,跑去原來的系統中查看源碼看是不是手誤改到了哪一項,結果發現原來的系統也不行了, 使用 ifconfig查看了一下

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1  (Local Loopback)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

少了一項網卡的,嘗試着重啟了系統,再測試一下,也是不行.跑去翻了網絡上的大神門都是怎么解決了,嘗試了數種方法,終於兩個系統都解決了

在 /etc/sysconfig/network-scripts目錄下刪除掉別的ifcfg-xxx(只保留一個你網卡同名的文檔)

再把NetworkManager停用

systemctl stop NetworkManager
systemctl disable NetworkManager

使用 ip addr 查看 mac地址,把mac地址添加進 ifcfg-xxx 的HWADDR中(如果沒有就再新添加一項)

HWADDR=xx:xx:xx:xx:xx:xx

:wq 保存之后再執行 systemctl restart network 就可以解決了