Mybatis callSettersOnNulls 查詢返回Map時設置值為null

這兩天用到了Spring boot + Mybatis 做項目，使用了resultType="HashMap" 接收Mybatis查詢返回的數據。以列名作為key，值作為value。結果發現部分列沒有返回相對應的k-v對，導致了程序發生了錯誤。

然后開始debug大法，這里開始調用invoke方法，使用MapperMethod  的execute方法。

  public Object invoke(Object proxy, Method method, Object[] args) throws Throwable {
    try {
      if (Object.class.equals(method.getDeclaringClass())) {
        return method.invoke(this, args);
      } else if (isDefaultMethod(method)) {
        return invokeDefaultMethod(proxy, method, args);
      }
    } catch (Throwable t) {
      throw ExceptionUtil.unwrapThrowable(t);
    }
    final MapperMethod mapperMethod = cachedMapperMethod(method);
    return mapperMethod.execute(sqlSession, args);
  }　　

MapperMethod 類 通過判斷sql的執行類型和返回值類型來選擇執行方法，這里是select語句，並且返回值類型是list，就會選擇executeForMany方法。

public Object execute(SqlSession sqlSession, Object[] args) {
    Object result;
    switch (command.getType()) {
     .... 省略部分代碼
      case SELECT:
        if (method.returnsVoid() && method.hasResultHandler()) {
          executeWithResultHandler(sqlSession, args);
          result = null;
        } else if (method.returnsMany()) {
          result = executeForMany(sqlSession, args);
        } else if (method.returnsMap()) {
          result = executeForMap(sqlSession, args);
        } else if (method.returnsCursor()) {
          result = executeForCursor(sqlSession, args);
        } else {
          Object param = method.convertArgsToSqlCommandParam(args);
          result = sqlSession.selectOne(command.getName(), param);
        }
        break;
      case FLUSH:
        result = sqlSession.flushStatements();
        break;
      default:
        throw new BindingException("Unknown execution method for: " + command.getName());
    }
    .... 省略部分代碼
    return result;
  }

　　然后執行selectList 方法，

  private <E> Object executeForMany(SqlSession sqlSession, Object[] args) {
    List<E> result;
    Object param = method.convertArgsToSqlCommandParam(args);
    if (method.hasRowBounds()) {
      RowBounds rowBounds = method.extractRowBounds(args);
      result = sqlSession.<E>selectList(command.getName(), param, rowBounds);
    } else {
      result = sqlSession.<E>selectList(command.getName(), param);
    }
    // issue #510 Collections & arrays support
    if (!method.getReturnType().isAssignableFrom(result.getClass())) {
      if (method.getReturnType().isArray()) {
        return convertToArray(result);
      } else {
        return convertToDeclaredCollection(sqlSession.getConfiguration(), result);
      }
    }
    return result;
  }

　再通過method 的invoke方法反射調用

    public Object invoke(Object proxy, Method method, Object[] args) throws Throwable {
      SqlSession sqlSession = getSqlSession(
          SqlSessionTemplate.this.sqlSessionFactory,
          SqlSessionTemplate.this.executorType,
          SqlSessionTemplate.this.exceptionTranslator);
      try {
        Object result = method.invoke(sqlSession, args);
        。。。。
        return result;
      } 
	  。。。 省略
    }
  }

　　然后執行select方法

  @Override
  public <E> List<E> selectList(String statement, Object parameter) {
    return this.selectList(statement, parameter, RowBounds.DEFAULT);
  }

　　其實也就是調用了selectList方法，再執行Executor 的query方法。

  public <E> List<E> selectList(String statement, Object parameter, RowBounds rowBounds) {
    try {
      MappedStatement ms = configuration.getMappedStatement(statement);
      return executor.query(ms, wrapCollection(parameter), rowBounds, Executor.NO_RESULT_HANDLER);
    } catch (Exception e) {
      throw ExceptionFactory.wrapException("Error querying database.  Cause: " + e, e);
    } finally {
      ErrorContext.instance().reset();
    }
  }

　　然后到了，主要看query方法

  public <E> List<E> query(MappedStatement ms, Object parameter, RowBounds rowBounds, ResultHandler resultHandler) throws SQLException {
    BoundSql boundSql = ms.getBoundSql(parameter);
    CacheKey key = createCacheKey(ms, parameter, rowBounds, boundSql);
    return query(ms, parameter, rowBounds, resultHandler, key, boundSql);
 }

　　然后是 

  @SuppressWarnings("unchecked")
  @Override
  public <E> List<E> query(MappedStatement ms, Object parameter, RowBounds rowBounds, ResultHandler resultHandler, CacheKey key, BoundSql boundSql) throws SQLException {
    ErrorContext.instance().resource(ms.getResource()).activity("executing a query").object(ms.getId());
    。。。
    List<E> list;
    try {
      queryStack++;
      list = resultHandler == null ? (List<E>) localCache.getObject(key) : null;
      if (list != null) {
        handleLocallyCachedOutputParameters(ms, key, parameter, boundSql);
      } else {
        list = queryFromDatabase(ms, parameter, rowBounds, resultHandler, key, boundSql);
      }
    } finally {
      queryStack--;
    }
    。。。
    return list;
  }

　　來看看 queryFromDatabase方法，這里會加入緩存，然后執行query方法。

  private <E> List<E> queryFromDatabase(MappedStatement ms, Object parameter, RowBounds rowBounds, ResultHandler resultHandler, CacheKey key, BoundSql boundSql) throws SQLException {
    List<E> list;
    localCache.putObject(key, EXECUTION_PLACEHOLDER);
    try {
      list = doQuery(ms, parameter, rowBounds, resultHandler, boundSql);
    } finally {
      localCache.removeObject(key);
    }
    localCache.putObject(key, list);
    if (ms.getStatementType() == StatementType.CALLABLE) {
      localOutputParameterCache.putObject(key, parameter);
    }
    return list;
  }

　　這里主要先獲取了Mybatis的配置類，把攔截器放入到Handler類中，再生成具體的Statement，比如PreparedStatement等，然后執行Handler的query方法

  public <E> List<E> doQuery(MappedStatement ms, Object parameter, RowBounds rowBounds, ResultHandler resultHandler, BoundSql boundSql) throws SQLException {
    Statement stmt = null;
    try {
      Configuration configuration = ms.getConfiguration();
      StatementHandler handler = configuration.newStatementHandler(wrapper, ms, parameter, rowBounds, resultHandler, boundSql);
      stmt = prepareStatement(handler, ms.getStatementLog());
      return handler.<E>query(stmt, resultHandler);
    } finally {
      closeStatement(stmt);
    }
  }

　　再反射調用query方法

  public Object invoke(Object proxy, Method method, Object[] args) throws Throwable {
    try {
      Set<Method> methods = signatureMap.get(method.getDeclaringClass());
      if (methods != null && methods.contains(method)) {
        return interceptor.intercept(new Invocation(target, method, args));
      }
      return method.invoke(target, args);
    } catch (Exception e) {
      throw ExceptionUtil.unwrapThrowable(e);
    }
  }

　　就是這里

  @Override
  public <E> List<E> query(Statement statement, ResultHandler resultHandler) throws SQLException {
    return delegate.<E>query(statement, resultHandler);
  }

　　進去，這里的PreparedStatement開始執行execute方法，執行查詢數據庫，獲取到具體的數據，然后對查詢到的結果集進行處理。

  public <E> List<E> query(Statement statement, ResultHandler resultHandler) throws SQLException {
    PreparedStatement ps = (PreparedStatement) statement;
    ps.execute();
    return resultSetHandler.<E> handleResultSets(ps);
  }　　

看看handleResultSets方法，注釋也說清楚了，處理返回的結果集。我們主要看看為什么沒有返回數據是null的k-v對。

  //
  // HANDLE RESULT SETS
  //
  @Override
  public List<Object> handleResultSets(Statement stmt) throws SQLException {
    ErrorContext.instance().activity("handling results").object(mappedStatement.getId());

    final List<Object> multipleResults = new ArrayList<Object>();

    int resultSetCount = 0;
    ResultSetWrapper rsw = getFirstResultSet(stmt);

    List<ResultMap> resultMaps = mappedStatement.getResultMaps();
    int resultMapCount = resultMaps.size();
    validateResultMapsCount(rsw, resultMapCount);
    while (rsw != null && resultMapCount > resultSetCount) {
      ResultMap resultMap = resultMaps.get(resultSetCount);
      handleResultSet(rsw, resultMap, multipleResults, null);
      rsw = getNextResultSet(stmt);
      cleanUpAfterHandlingResultSet();
      resultSetCount++;
    }

    String[] resultSets = mappedStatement.getResultSets();
    if (resultSets != null) {
      while (rsw != null && resultSetCount < resultSets.length) {
        ResultMapping parentMapping = nextResultMaps.get(resultSets[resultSetCount]);
        if (parentMapping != null) {
          String nestedResultMapId = parentMapping.getNestedResultMapId();
          ResultMap resultMap = configuration.getResultMap(nestedResultMapId);
          handleResultSet(rsw, resultMap, null, parentMapping);
        }
        rsw = getNextResultSet(stmt);
        cleanUpAfterHandlingResultSet();
        resultSetCount++;
      }
    }

    return collapseSingleResultList(multipleResults);
  }

 

DefaultResultSetHandler 類的handleResultSet方法，

  private void handleResultSet(ResultSetWrapper rsw, ResultMap resultMap, List<Object> multipleResults, ResultMapping parentMapping) throws SQLException {
    try {
      if (parentMapping != null) {
        handleRowValues(rsw, resultMap, null, RowBounds.DEFAULT, parentMapping);
      } else {
        if (resultHandler == null) {
          DefaultResultHandler defaultResultHandler = new DefaultResultHandler(objectFactory);
          handleRowValues(rsw, resultMap, defaultResultHandler, rowBounds, null);
          multipleResults.add(defaultResultHandler.getResultList());
        } else {
          handleRowValues(rsw, resultMap, resultHandler, rowBounds, null);
        }
      }
    } finally {
      // issue #228 (close resultsets)
      closeResultSet(rsw.getResultSet());
    }
  }

　　然后看看handleRowValues方法

  //
  // HANDLE ROWS FOR SIMPLE RESULTMAP
  //

  public void handleRowValues(ResultSetWrapper rsw, ResultMap resultMap, ResultHandler<?> resultHandler, RowBounds rowBounds, ResultMapping parentMapping) throws SQLException {
    if (resultMap.hasNestedResultMaps()) {
      ensureNoRowBounds();
      checkResultHandler();
      handleRowValuesForNestedResultMap(rsw, resultMap, resultHandler, rowBounds, parentMapping);
    } else {
      handleRowValuesForSimpleResultMap(rsw, resultMap, resultHandler, rowBounds, parentMapping);
    }
  }

　　

　　然后是handleRowValuesForSimpleResultMap

  private void handleRowValuesForSimpleResultMap(ResultSetWrapper rsw, ResultMap resultMap, ResultHandler<?> resultHandler, RowBounds rowBounds, ResultMapping parentMapping)
      throws SQLException {
    DefaultResultContext<Object> resultContext = new DefaultResultContext<Object>();
    skipRows(rsw.getResultSet(), rowBounds);
    while (shouldProcessMoreRows(resultContext, rowBounds) && rsw.getResultSet().next()) {
      ResultMap discriminatedResultMap = resolveDiscriminatedResultMap(rsw.getResultSet(), resultMap, null);
      Object rowValue = getRowValue(rsw, discriminatedResultMap);
      storeObject(resultHandler, resultContext, rowValue, parentMapping, rsw.getResultSet());
    }
  }

　接着是獲取每一行的值

  //
  // GET VALUE FROM ROW FOR SIMPLE RESULT MAP
  //

  private Object getRowValue(ResultSetWrapper rsw, ResultMap resultMap) throws SQLException {
    final ResultLoaderMap lazyLoader = new ResultLoaderMap();
    Object rowValue = createResultObject(rsw, resultMap, lazyLoader, null);
    if (rowValue != null && !hasTypeHandlerForResultObject(rsw, resultMap.getType())) {
      final MetaObject metaObject = configuration.newMetaObject(rowValue);
      boolean foundValues = this.useConstructorMappings;
      if (shouldApplyAutomaticMappings(resultMap, false)) {
        foundValues = applyAutomaticMappings(rsw, resultMap, metaObject, null) || foundValues;
      }
      foundValues = applyPropertyMappings(rsw, resultMap, metaObject, lazyLoader, null) || foundValues;
      foundValues = lazyLoader.size() > 0 || foundValues;
      rowValue = (foundValues || configuration.isReturnInstanceForEmptyRow()) ? rowValue : null;
    }
    return rowValue;
  }　

 

再看看applyAutomaticMappings 方法，final Object value = mapping.typeHandler.getResult(rsw.getResultSet(), mapping.column);

就是獲取到每一行具體那一列的值，

value != null || (configuration.isCallSettersOnNulls() && !mapping.primitive
會判斷value是否為null，當某一行某一列的值是null的時候，會callSettersOnNulls這個配置的值，是否把這一行這一列以列名為key，null為值返回。

  private boolean applyAutomaticMappings(ResultSetWrapper rsw, ResultMap resultMap, MetaObject metaObject, String columnPrefix) throws SQLException {
    List<UnMappedColumnAutoMapping> autoMapping = createAutomaticMappings(rsw, resultMap, metaObject, columnPrefix);
    boolean foundValues = false;
    if (!autoMapping.isEmpty()) {
      for (UnMappedColumnAutoMapping mapping : autoMapping) {
        final Object value = mapping.typeHandler.getResult(rsw.getResultSet(), mapping.column);
        if (value != null) {
          foundValues = true;
        }
        if (value != null || (configuration.isCallSettersOnNulls() && !mapping.primitive)) {
          // gcode issue #377, call setter on nulls (value is not 'found')
          metaObject.setValue(mapping.property, value);
        }
      }
    }
    return foundValues;
  }

　　

　到了這里，也就知道了mybatis 中callSettersOnNulls 參數的真正作用是查詢的某一行某一列為null，是否返回。