問題
安裝Centos7(core)以后,網卡默認不會啟用。這是一個大坑,直接報錯,這是一個過度優化,有幾個開發人員/運維人員安裝centos7(core)不用ssh去連接服務器的。
報錯如下:
Loaded plugins: fastestmirror Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=7&arch=x86_64&repo=os&infra=stock error was 14: curl#6 - "Could not resolve host: mirrorlist.centos.org; Unknown error" http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#6 - "Could not resolve host: mirror.centos.org; Unknown error" Trying other mirror. One of the configured repositories failed (CentOS-7 - Base), and yum doesn't have enough cached data to continue. At this point the only safe thing yum can do is fail. There are a few ways to work "fix" this: 1. Contact the upstream for the repository and get them to fix the problem. 2. Reconfigure the baseurl/etc. for the repository, to point to a working upstream. This is most often useful if you are using a newer distribution release than is supported by the repository (and the packages for the previous distribution release still work). 3. Run the command with the repository temporarily disabled yum --disablerepo=base ... 4. Disable the repository permanently, so yum won't use it by default. Yum will then just ignore the repository until you permanently enable it again or use --enablerepo for temporary usage: yum-config-manager --disable base or subscription-manager repos --disable=base 5. Configure the failing repository to be skipped, if it is unavailable. Note that yum will try to contact the repo. when it runs most commands, so will have to try and fail each time (and thus. yum will be be much slower). If it is a very temporary problem though, this is often a nice compromise: yum-config-manager --save --setopt=base.skip_if_unavailable=true failure: repodata/repomd.xml from base: [Errno 256] No more mirrors to try. http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#6 - "Could not resolve host: mirror.centos.org; Unknown error" [root@localhost ~]#
解決辦法
1、故障發生以后,第一看看網絡是否通暢
ping www.baidu.com #google dns ping 8.8.8.8
以上均無反應,於是想起來前一段時間設置過一次centos網卡,讓他開機自動啟動。命令如下
vi /etc/sysconfig/network-scripts/ifcfg-ens33
修改里面的Boot=yes
Boot=no (開機引導的時候不啟動網卡) #改成yes
啟動網卡
ifup ens33
查看ip地址
ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 00:0c:29:63:c2:ca brd ff:ff:ff:ff:ff:ff inet 192.168.152.141/24 brd 192.168.152.255 scope global noprefixroute dynamic ens33 valid_lft 1319sec preferred_lft 1319sec inet6 fe80::fdb9:c978:ff44:dbc5/64 scope link noprefixroute valid_lft forever preferred_lft forever
虛擬機ip地址是 192.168.152.141
2、更新本地緩存:
yum makecache [root@promote ~]# yum makecache Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * base: mirrors.cn99.com * extras: mirrors.njupt.edu.cn * updates: mirrors.cn99.com base | 3.6 kB 00:00:00 extras | 3.4 kB 00:00:00 updates | 3.4 kB 00:00:00 (1/8): extras/7/x86_64/other_db | 127 kB 00:00:00 (2/8): extras/7/x86_64/filelists_db | 246 kB 00:00:00 (3/8): updates/7/x86_64/prestodelta | 797 kB 00:00:00 (4/8): updates/7/x86_64/other_db | 641 kB 00:00:00 (5/8): base/7/x86_64/other_db | 2.6 MB 00:00:01 (6/8): base/7/x86_64/filelists_db | 7.1 MB 00:00:02 (7/8): updates/7/x86_64/filelists_db | 4.4 MB 00:00:03 extras/7/x86_64/prestodelta FAILED http://mirrors.njupt.edu.cn/centos/7.6.1810/extras/x86_64/repodata/5bfd3d5f07606011226e556e87d978ca1dfe51a63e18d793182900d5bbc702b5-prestodelta.xml.gz: [Errno 14] HTTP Error 302 - Found Trying other mirror. (8/8): extras/7/x86_64/prestodelta | 65 kB 00:00:00 Metadata Cache Created