mysql 8.0.16 單主 mgr搭建
環境介紹：
192.168.142.142 db142
192.168.142.143 db143
192.168.142.145 db145
1、安裝依賴包
yum -y install make gcc-c++ cmake bison-devel ncurses-devel readline-devel libaio-devel perl libaio wget lrzsz vim libnuma* bzip2 xz
2、關閉selinux
sed -i 's/SELINUX=enforcing/SELINUX=disabled/' /etc/selinux/config setenforce 0 /etc/init.d/iptables stop echo "/etc/init.d/iptables stop">>/etc/rc.local
3、修改系統限制參數
cat >> /etc/security/limits.conf << EOF # ###custom # * soft nofile 20480 * hard nofile 65535 * soft nproc 20480 * hard nproc 65535 EOF # 配置每台hosts主機解析 cat >> /etc/hosts <<"EOF" 192.168.142.142 db142 192.168.142.143 db143 192.168.142.145 db145 EOF
4、修改內核參數
cat >>/etc/sysctl.conf <<"EOF" vm.swappiness=0 #增加tcp支持的隊列數 net.ipv4.tcp_max_syn_backlog = 65535 #減少斷開連接時 ，資源回收 net.ipv4.tcp_max_tw_buckets = 8000 net.ipv4.tcp_tw_reuse = 1 net.ipv4.tcp_tw_recycle = 1 net.ipv4.tcp_fin_timeout = 10 #改變本地的端口范圍 net.ipv4.ip_local_port_range = 1024 65535 #允許更多的連接進入隊列 net.ipv4.tcp_max_syn_backlog = 4096 #對於只在本地使用的數據庫服務器 net.ipv4.tcp_fin_timeout = 30 #端口監聽隊列 net.core.somaxconn=65535 #接受數據的速率 net.core.netdev_max_backlog=65535 net.core.wmem_default=87380 net.core.wmem_max=16777216 net.core.rmem_default=87380 net.core.rmem_max=16777216 EOF sysctl -p
5、社區版 8.0.16 下載
cd /opt/ wget https://dev.mysql.com/get/Downloads/MySQL-8.0/mysql-8.0.16-linux-glibc2.12-x86_64.tar.xz # 解壓安裝包 tar -xJf mysql-8.0.16-linux-glibc2.12-x86_64.tar.xz # 進入目錄，做軟連接，方便以后升級 cd /usr/local/ ln -s /opt/mysql-8.0.16-linux-glibc2.12-x86_64 mysql # 創建用戶 groupadd mysql useradd -g mysql mysql -d /home/mysql -s /sbin/nologin
# 創建相應的目錄
mkdir -p /data/mysql/mysql_3306/{data,logs,tmp,undolog}
6、配置文件
# node1
if [ -f /etc/my.cnf ]; then mv /etc/my.cnf /etc/my.cnf.`date +%Y%m%d%H%m`.bak fi # node1 cat >/data/mysql/mysql_3306/my_3306.cnf <<"EOF" [client] port = 3306 socket = /data/mysql/mysql_3306/tmp/mysql_3306.sock [mysql] prompt="\u@\h \R:\m:\s [\d]> " no-auto-rehash [mysqld] user = mysql port = 3306 admin_address = 127.0.0.1 basedir = /usr/local/mysql datadir = /data/mysql/mysql_3306/data socket = /data/mysql/mysql_3306/tmp/mysql_3306.sock pid-file = mysql_3306.pid character-set-server = utf8mb4 skip_name_resolve = 1 #replicate-wild-ignore-table=mysql.% replicate-wild-ignore-table=test.% replicate-wild-ignore-table=information_schema.% # Two-Master configure #server-1 #auto-increment-offset = 1 #auto-increment-increment = 2 #server-2 #auto-increment-offset = 2 #auto-increment-increment = 2 # semi sync replication settings # #plugin_dir = /usr/local/mysql/lib/mysql/plugin #plugin_load = "validate_password.so;rpl_semi_sync_master=semisync_master.so;rpl_semi_sync_slave=semisync_slave.so" plugin_dir = /usr/local/mysql/lib/plugin #官方版本的路徑 plugin_load = "rpl_semi_sync_master=semisync_master.so;rpl_semi_sync_slave=semisync_slave.so" #官方版本的路徑 slave_parallel_workers = 4 slave_parallel_type = LOGICAL_CLOCK slave_preserve_commit_order = 1 open_files_limit = 65535 back_log = 1024 max_connections = 1024 max_connect_errors = 1000000 table_open_cache = 1024 table_definition_cache = 1024 table_open_cache_instances = 64 thread_stack = 512K external-locking = FALSE max_allowed_packet = 32M sort_buffer_size = 4M join_buffer_size = 4M thread_cache_size = 1536 interactive_timeout = 600 wait_timeout = 600 tmp_table_size = 32M max_heap_table_size = 32M slow_query_log = 1 log_timestamps = SYSTEM slow_query_log_file = /data/mysql/mysql_3306/logs/slow.log log-error = /data/mysql/mysql_3306/logs/error.log long_query_time = 0.1 log_queries_not_using_indexes =1 log_throttle_queries_not_using_indexes = 60 min_examined_row_limit = 100 log_slow_admin_statements = 1 log_slow_slave_statements = 1 server-id = 1423306 log-bin = /data/mysql/mysql_3306/logs/mysql-bin sync_binlog = 1 binlog_cache_size = 4M max_binlog_cache_size = 2G max_binlog_size = 1G binlog_expire_logs_seconds=2592000 master_info_repository = TABLE relay_log_info_repository = TABLE gtid_mode = on enforce_gtid_consistency = 1 binlog_checksum=NONE log_slave_updates slave-rows-search-algorithms = 'INDEX_SCAN,HASH_SCAN' binlog_format = row binlog_row_image=FULL relay_log_recovery = 1 relay-log-purge = 1 key_buffer_size = 32M read_buffer_size = 8M read_rnd_buffer_size = 4M bulk_insert_buffer_size = 64M myisam_sort_buffer_size = 128M myisam_max_sort_file_size = 10G myisam_repair_threads = 1 lock_wait_timeout = 3600 explicit_defaults_for_timestamp = 1 innodb_thread_concurrency = 0 innodb_sync_spin_loops = 100 innodb_spin_wait_delay = 30 #transaction_isolation = REPEATABLE-READ transaction_isolation = READ-COMMITTED #innodb_additional_mem_pool_size = 16M innodb_buffer_pool_size = 2867M innodb_buffer_pool_instances = 4 innodb_buffer_pool_load_at_startup = 1 innodb_buffer_pool_dump_at_shutdown = 1 innodb_data_file_path = ibdata1:1G:autoextend innodb_flush_log_at_trx_commit = 1 innodb_log_buffer_size = 32M innodb_log_file_size = 2G innodb_log_files_in_group = 3 innodb_max_undo_log_size = 4G innodb_undo_directory = /data/mysql/mysql_3306/undolog # 根據您的服務器IOPS能力適當調整 # 一般配普通SSD盤的話，可以調整到 10000 - 20000 # 配置高端PCIe SSD卡的話，則可以調整的更高，比如 50000 - 80000 innodb_io_capacity = 4000 innodb_io_capacity_max = 8000 innodb_flush_sync = 0 innodb_flush_neighbors = 0 innodb_write_io_threads = 8 innodb_read_io_threads = 8 innodb_purge_threads = 4 innodb_page_cleaners = 4 innodb_open_files = 65535 innodb_max_dirty_pages_pct = 50 innodb_flush_method = O_DIRECT innodb_lru_scan_depth = 4000 innodb_checksum_algorithm = crc32 innodb_lock_wait_timeout = 10 innodb_rollback_on_timeout = 1 innodb_print_all_deadlocks = 1 innodb_file_per_table = 1 innodb_online_alter_log_max_size = 4G innodb_stats_on_metadata = 0 # some var for MySQL 8 log_error_verbosity = 3 innodb_print_ddl_logs = 1 binlog_expire_logs_seconds = 2592000 #innodb_dedicated_server = 0 innodb_status_file = 1 # 注意: 開啟 innodb_status_output & innodb_status_output_locks 后, 可能會導致log-error文件增長較快 innodb_status_output = 0 innodb_status_output_locks = 0 #performance_schema performance_schema = 1 performance_schema_instrument = '%memory%=on' performance_schema_instrument = '%lock%=on' #innodb monitor innodb_monitor_enable="module_innodb" innodb_monitor_enable="module_server" innodb_monitor_enable="module_dml" innodb_monitor_enable="module_ddl" innodb_monitor_enable="module_trx" innodb_monitor_enable="module_os" innodb_monitor_enable="module_purge" innodb_monitor_enable="module_log" innodb_monitor_enable="module_lock" innodb_monitor_enable="module_buffer" innodb_monitor_enable="module_index" innodb_monitor_enable="module_ibuf_system" innodb_monitor_enable="module_buffer_page" innodb_monitor_enable="module_adaptive_hash" #MGR #GR配置項 基中loose前綴表示若group Replication plugin未加載 mysql server仍明治維新啟動 transaction_write_set_extraction = XXHASH64 #對每個事務獲取write set，並且用XXHASH64算法獲取hash值 loose-group_replication_group_name = "58f6e65e-9309-11e9-9d88-525400184a0a" #組名，此處可拿select uuid()生成 loose-group_replication_start_on_boot = off #在mysqld啟動時不自動啟動組復制 loose-group_replication_local_address = "192.168.142.142:33006" #本節點的IP地址和端口，注意該端口是組內成員之間通信的端口，而不是MySQL對外提供服務的端口 loose-group_replication_group_seeds = "192.168.142.142:33006,192.168.142.143:33006,192.168.142.145:33006" #種子節點的IP和端口號，新成員加入到集群的時候需要聯系種子節點，啟動集群的節點不使用該選項 loose-group_replication_bootstrap_group = off #關閉，如果打開會造成腦裂 #是否啟動集群，注意，該選項任何時候只能用於一個節點，通常情況下啟動集群的時候使用，啟動之后需要關閉該選項 loose-group_replication_member_weight = 50 #權重選擇 [mysqldump] quick max_allowed_packet = 32M [mysqld_safe] #malloc-lib=/usr/local/mysql/lib/jmalloc.so nice=-19 open-files-limit=65535 EOF
# node2
# node2 cat >/data/mysql/mysql_3306/my_3306.cnf <<"EOF" [client] port = 3306 socket = /data/mysql/mysql_3306/tmp/mysql_3306.sock [mysql] prompt="\u@\h \R:\m:\s [\d]> " no-auto-rehash [mysqld] user = mysql port = 3306 admin_address = 127.0.0.1 basedir = /usr/local/mysql datadir = /data/mysql/mysql_3306/data socket = /data/mysql/mysql_3306/tmp/mysql_3306.sock pid-file = mysql_3306.pid character-set-server = utf8mb4 skip_name_resolve = 1 #replicate-wild-ignore-table=mysql.% replicate-wild-ignore-table=test.% replicate-wild-ignore-table=information_schema.% # Two-Master configure #server-1 #auto-increment-offset = 1 #auto-increment-increment = 2 #server-2 #auto-increment-offset = 2 #auto-increment-increment = 2 # semi sync replication settings # #plugin_dir = /usr/local/mysql/lib/mysql/plugin #plugin_load = "validate_password.so;rpl_semi_sync_master=semisync_master.so;rpl_semi_sync_slave=semisync_slave.so" plugin_dir = /usr/local/mysql/lib/plugin #官方版本的路徑 plugin_load = "rpl_semi_sync_master=semisync_master.so;rpl_semi_sync_slave=semisync_slave.so" #官方版本的路徑 slave_parallel_workers = 4 slave_parallel_type = LOGICAL_CLOCK slave_preserve_commit_order = 1 open_files_limit = 65535 back_log = 1024 max_connections = 1024 max_connect_errors = 1000000 table_open_cache = 1024 table_definition_cache = 1024 table_open_cache_instances = 64 thread_stack = 512K external-locking = FALSE max_allowed_packet = 32M sort_buffer_size = 4M join_buffer_size = 4M thread_cache_size = 1536 interactive_timeout = 600 wait_timeout = 600 tmp_table_size = 32M max_heap_table_size = 32M slow_query_log = 1 log_timestamps = SYSTEM slow_query_log_file = /data/mysql/mysql_3306/logs/slow.log log-error = /data/mysql/mysql_3306/logs/error.log long_query_time = 0.1 log_queries_not_using_indexes =1 log_throttle_queries_not_using_indexes = 60 min_examined_row_limit = 100 log_slow_admin_statements = 1 log_slow_slave_statements = 1 server-id = 1433306 log-bin = /data/mysql/mysql_3306/logs/mysql-bin sync_binlog = 1 binlog_cache_size = 4M max_binlog_cache_size = 2G max_binlog_size = 1G binlog_expire_logs_seconds=2592000 master_info_repository = TABLE relay_log_info_repository = TABLE gtid_mode = on enforce_gtid_consistency = 1 binlog_checksum=NONE log_slave_updates slave-rows-search-algorithms = 'INDEX_SCAN,HASH_SCAN' binlog_format = row binlog_row_image=FULL relay_log_recovery = 1 relay-log-purge = 1 key_buffer_size = 32M read_buffer_size = 8M read_rnd_buffer_size = 4M bulk_insert_buffer_size = 64M myisam_sort_buffer_size = 128M myisam_max_sort_file_size = 10G myisam_repair_threads = 1 lock_wait_timeout = 3600 explicit_defaults_for_timestamp = 1 innodb_thread_concurrency = 0 innodb_sync_spin_loops = 100 innodb_spin_wait_delay = 30 #transaction_isolation = REPEATABLE-READ transaction_isolation = READ-COMMITTED #innodb_additional_mem_pool_size = 16M innodb_buffer_pool_size = 2867M innodb_buffer_pool_instances = 4 innodb_buffer_pool_load_at_startup = 1 innodb_buffer_pool_dump_at_shutdown = 1 innodb_data_file_path = ibdata1:1G:autoextend innodb_flush_log_at_trx_commit = 1 innodb_log_buffer_size = 32M innodb_log_file_size = 2G innodb_log_files_in_group = 3 innodb_max_undo_log_size = 4G innodb_undo_directory = /data/mysql/mysql_3306/undolog # 根據您的服務器IOPS能力適當調整 # 一般配普通SSD盤的話，可以調整到 10000 - 20000 # 配置高端PCIe SSD卡的話，則可以調整的更高，比如 50000 - 80000 innodb_io_capacity = 4000 innodb_io_capacity_max = 8000 innodb_flush_sync = 0 innodb_flush_neighbors = 0 innodb_write_io_threads = 8 innodb_read_io_threads = 8 innodb_purge_threads = 4 innodb_page_cleaners = 4 innodb_open_files = 65535 innodb_max_dirty_pages_pct = 50 innodb_flush_method = O_DIRECT innodb_lru_scan_depth = 4000 innodb_checksum_algorithm = crc32 innodb_lock_wait_timeout = 10 innodb_rollback_on_timeout = 1 innodb_print_all_deadlocks = 1 innodb_file_per_table = 1 innodb_online_alter_log_max_size = 4G innodb_stats_on_metadata = 0 # some var for MySQL 8 log_error_verbosity = 3 innodb_print_ddl_logs = 1 binlog_expire_logs_seconds = 2592000 #innodb_dedicated_server = 0 innodb_status_file = 1 # 注意: 開啟 innodb_status_output & innodb_status_output_locks 后, 可能會導致log-error文件增長較快 innodb_status_output = 0 innodb_status_output_locks = 0 #performance_schema performance_schema = 1 performance_schema_instrument = '%memory%=on' performance_schema_instrument = '%lock%=on' #innodb monitor innodb_monitor_enable="module_innodb" innodb_monitor_enable="module_server" innodb_monitor_enable="module_dml" innodb_monitor_enable="module_ddl" innodb_monitor_enable="module_trx" innodb_monitor_enable="module_os" innodb_monitor_enable="module_purge" innodb_monitor_enable="module_log" innodb_monitor_enable="module_lock" innodb_monitor_enable="module_buffer" innodb_monitor_enable="module_index" innodb_monitor_enable="module_ibuf_system" innodb_monitor_enable="module_buffer_page" innodb_monitor_enable="module_adaptive_hash" #MGR #GR配置項 基中loose前綴表示若group Replication plugin未加載 mysql server仍明治維新啟動 transaction_write_set_extraction = XXHASH64 #對每個事務獲取write set，並且用XXHASH64算法獲取hash值 loose-group_replication_group_name = "58f6e65e-9309-11e9-9d88-525400184a0a" #組名，此處可拿select uuid()生成 loose-group_replication_start_on_boot = off #在mysqld啟動時不自動啟動組復制 loose-group_replication_local_address = "192.168.142.143:33006" #本節點的IP地址和端口，注意該端口是組內成員之間通信的端口，而不是MySQL對外提供服務的端口 loose-group_replication_group_seeds = "192.168.142.142:33006,192.168.142.143:33006,192.168.142.145:33006" #種子節點的IP和端口號，新成員加入到集群的時候需要聯系種子節點，啟動集群的節點不使用該選項 loose-group_replication_bootstrap_group = off #關閉，如果打開會造成腦裂 #是否啟動集群，注意，該選項任何時候只能用於一個節點，通常情況下啟動集群的時候使用，啟動之后需要關閉該選項 loose-group_replication_member_weight = 50 #權重選擇 [mysqldump] quick max_allowed_packet = 32M [mysqld_safe] #malloc-lib=/usr/local/mysql/lib/jmalloc.so nice=-19 open-files-limit=65535 EOF
# node3
# node3 cat >/data/mysql/mysql_3306/my_3306.cnf <<"EOF" [client] port = 3306 socket = /data/mysql/mysql_3306/tmp/mysql_3306.sock [mysql] prompt="\u@\h \R:\m:\s [\d]> " no-auto-rehash [mysqld] user = mysql port = 3306 admin_address = 127.0.0.1 basedir = /usr/local/mysql datadir = /data/mysql/mysql_3306/data socket = /data/mysql/mysql_3306/tmp/mysql_3306.sock pid-file = mysql_3306.pid character-set-server = utf8mb4 skip_name_resolve = 1 #replicate-wild-ignore-table=mysql.% replicate-wild-ignore-table=test.% replicate-wild-ignore-table=information_schema.% # Two-Master configure #server-1 #auto-increment-offset = 1 #auto-increment-increment = 2 #server-2 #auto-increment-offset = 2 #auto-increment-increment = 2 # semi sync replication settings # #plugin_dir = /usr/local/mysql/lib/mysql/plugin #plugin_load = "validate_password.so;rpl_semi_sync_master=semisync_master.so;rpl_semi_sync_slave=semisync_slave.so" plugin_dir = /usr/local/mysql/lib/plugin #官方版本的路徑 plugin_load = "rpl_semi_sync_master=semisync_master.so;rpl_semi_sync_slave=semisync_slave.so" #官方版本的路徑 slave_parallel_workers = 4 slave_parallel_type = LOGICAL_CLOCK slave_preserve_commit_order = 1 open_files_limit = 65535 back_log = 1024 max_connections = 1024 max_connect_errors = 1000000 table_open_cache = 1024 table_definition_cache = 1024 table_open_cache_instances = 64 thread_stack = 512K external-locking = FALSE max_allowed_packet = 32M sort_buffer_size = 4M join_buffer_size = 4M thread_cache_size = 1536 interactive_timeout = 600 wait_timeout = 600 tmp_table_size = 32M max_heap_table_size = 32M slow_query_log = 1 log_timestamps = SYSTEM slow_query_log_file = /data/mysql/mysql_3306/logs/slow.log log-error = /data/mysql/mysql_3306/logs/error.log long_query_time = 0.1 log_queries_not_using_indexes =1 log_throttle_queries_not_using_indexes = 60 min_examined_row_limit = 100 log_slow_admin_statements = 1 log_slow_slave_statements = 1 server-id = 1453306 log-bin = /data/mysql/mysql_3306/logs/mysql-bin sync_binlog = 1 binlog_cache_size = 4M max_binlog_cache_size = 2G max_binlog_size = 1G binlog_expire_logs_seconds=2592000 master_info_repository = TABLE relay_log_info_repository = TABLE gtid_mode = on enforce_gtid_consistency = 1 binlog_checksum=NONE log_slave_updates slave-rows-search-algorithms = 'INDEX_SCAN,HASH_SCAN' binlog_format = row binlog_row_image=FULL relay_log_recovery = 1 relay-log-purge = 1 key_buffer_size = 32M read_buffer_size = 8M read_rnd_buffer_size = 4M bulk_insert_buffer_size = 64M myisam_sort_buffer_size = 128M myisam_max_sort_file_size = 10G myisam_repair_threads = 1 lock_wait_timeout = 3600 explicit_defaults_for_timestamp = 1 innodb_thread_concurrency = 0 innodb_sync_spin_loops = 100 innodb_spin_wait_delay = 30 #transaction_isolation = REPEATABLE-READ transaction_isolation = READ-COMMITTED #innodb_additional_mem_pool_size = 16M innodb_buffer_pool_size = 2867M innodb_buffer_pool_instances = 4 innodb_buffer_pool_load_at_startup = 1 innodb_buffer_pool_dump_at_shutdown = 1 innodb_data_file_path = ibdata1:1G:autoextend innodb_flush_log_at_trx_commit = 1 innodb_log_buffer_size = 32M innodb_log_file_size = 2G innodb_log_files_in_group = 3 innodb_max_undo_log_size = 4G innodb_undo_directory = /data/mysql/mysql_3306/undolog # 根據您的服務器IOPS能力適當調整 # 一般配普通SSD盤的話，可以調整到 10000 - 20000 # 配置高端PCIe SSD卡的話，則可以調整的更高，比如 50000 - 80000 innodb_io_capacity = 4000 innodb_io_capacity_max = 8000 innodb_flush_sync = 0 innodb_flush_neighbors = 0 innodb_write_io_threads = 8 innodb_read_io_threads = 8 innodb_purge_threads = 4 innodb_page_cleaners = 4 innodb_open_files = 65535 innodb_max_dirty_pages_pct = 50 innodb_flush_method = O_DIRECT innodb_lru_scan_depth = 4000 innodb_checksum_algorithm = crc32 innodb_lock_wait_timeout = 10 innodb_rollback_on_timeout = 1 innodb_print_all_deadlocks = 1 innodb_file_per_table = 1 innodb_online_alter_log_max_size = 4G innodb_stats_on_metadata = 0 # some var for MySQL 8 log_error_verbosity = 3 innodb_print_ddl_logs = 1 binlog_expire_logs_seconds = 2592000 #innodb_dedicated_server = 0 innodb_status_file = 1 # 注意: 開啟 innodb_status_output & innodb_status_output_locks 后, 可能會導致log-error文件增長較快 innodb_status_output = 0 innodb_status_output_locks = 0 #performance_schema performance_schema = 1 performance_schema_instrument = '%memory%=on' performance_schema_instrument = '%lock%=on' #innodb monitor innodb_monitor_enable="module_innodb" innodb_monitor_enable="module_server" innodb_monitor_enable="module_dml" innodb_monitor_enable="module_ddl" innodb_monitor_enable="module_trx" innodb_monitor_enable="module_os" innodb_monitor_enable="module_purge" innodb_monitor_enable="module_log" innodb_monitor_enable="module_lock" innodb_monitor_enable="module_buffer" innodb_monitor_enable="module_index" innodb_monitor_enable="module_ibuf_system" innodb_monitor_enable="module_buffer_page" innodb_monitor_enable="module_adaptive_hash" #MGR #GR配置項 基中loose前綴表示若group Replication plugin未加載 mysql server仍明治維新啟動 transaction_write_set_extraction = XXHASH64 #對每個事務獲取write set，並且用XXHASH64算法獲取hash值 loose-group_replication_group_name = "58f6e65e-9309-11e9-9d88-525400184a0a" #組名，此處可拿select uuid()生成 loose-group_replication_start_on_boot = off #在mysqld啟動時不自動啟動組復制 loose-group_replication_local_address = "192.168.142.145:33006" #本節點的IP地址和端口，注意該端口是組內成員之間通信的端口，而不是MySQL對外提供服務的端口 loose-group_replication_group_seeds = "192.168.142.142:33006,192.168.142.143:33006,192.168.142.145:33006" #種子節點的IP和端口號，新成員加入到集群的時候需要聯系種子節點，啟動集群的節點不使用該選項 loose-group_replication_bootstrap_group = off #關閉，如果打開會造成腦裂 #是否啟動集群，注意，該選項任何時候只能用於一個節點，通常情況下啟動集群的時候使用，啟動之后需要關閉該選項 loose-group_replication_member_weight = 50 #權重選擇 [mysqldump] quick max_allowed_packet = 32M [mysqld_safe] #malloc-lib=/usr/local/mysql/lib/jmalloc.so nice=-19 open-files-limit=65535 EOF
7、修改目錄權限
chown -R mysql.mysql /data/mysql/mysql_3306 chown -R mysql.mysql /usr/local/mysql/
8、初始化數據庫
# /usr/local/mysql/bin/mysqld --user=mysql --basedir=/usr/local/mysql --datadir=/data/mysql --initialize-insecure # 官方推薦使用--initialize，會在錯誤日志中生成難以輸入的臨時密碼，我這里使用的免密碼的方式。 /usr/local/mysql/bin/mysqld --defaults-file=/data/mysql/mysql_3306/my_3306.cnf --initialize-insecure --user=mysql &
9、查看日志
# tail -f /data/mysql/mysql_3306/logs/error.log
# 10、啟動數據庫
/usr/local/mysql/bin/mysqld_safe --defaults-file=/data/mysql/mysql_3306/my_3306.cnf & ln -s /usr/local/mysql/bin/* /usr/bin/ ln -s /usr/local/mysql/lib/* /usr/lib64/ ln -s /data/mysql/mysql_3306/tmp/mysql_3306.sock /tmp/mysql.sock
11、配置mgr第一個主節點 192.168.142.142
# 第一步：創建用於復制的用戶 set sql_log_bin=0; create user 'repuser'@'%' identified by 'JhXpMK44ju8Vp5bxvO2N'; grant replication slave,replication client on *.* to 'repuser'@'%'; create user 'repuser'@'127.0.0.1' identified by 'JhXpMK44ju8Vp5bxvO2N'; grant replication slave,replication client on *.* to 'repuser'@'127.0.0.1'; create user 'repuser'@'localhost' identified by 'JhXpMK44ju8Vp5bxvO2N'; grant replication slave,replication client on *.* to 'repuser'@'localhost'; set sql_log_bin=1; # 第二步：配置復制所使用的用戶 change master to master_user='repuser',master_password='JhXpMK44ju8Vp5bxvO2N' for channel 'group_replication_recovery'; # 第三步：安裝mysql group replication這個插件 # 備注：如果在my.cnf里寫寫入 plugin_load="group_replication=group_replication.so" 這步就可以不用操作 install plugin group_replication soname 'group_replication.so'; # 通過show plugins;查看是否安裝成功 show plugins; # 第四步：建個群(官方點的說法就是初始化一個復制組 set global group_replication_bootstrap_group=on; start group_replication; set global group_replication_bootstrap_group=off; select * from performance_schema.replication_group_members;
12、配置另外兩節點，在所有從主機上的mysql中執行
# 第一步：創建用於復制的用戶 set sql_log_bin=0; create user 'repuser'@'%' identified by 'JhXpMK44ju8Vp5bxvO2N'; grant replication slave,replication client on *.* to 'repuser'@'%'; create user 'repuser'@'127.0.0.1' identified by 'JhXpMK44ju8Vp5bxvO2N'; grant replication slave,replication client on *.* to 'repuser'@'127.0.0.1'; create user 'repuser'@'localhost' identified by 'JhXpMK44ju8Vp5bxvO2N'; grant replication slave,replication client on *.* to 'repuser'@'localhost'; set sql_log_bin=1; # 第二步：配置復制所使用的用戶 change master to master_user='repuser',master_password='JhXpMK44ju8Vp5bxvO2N' for channel 'group_replication_recovery'; # 第三步：安裝mysql group replication這個插件 # 備注：如果在my.cnf里寫寫入 plugin_load="group_replication=group_replication.so" 這步就可以不用操作 install plugin group_replication soname 'group_replication.so'; # 通過show plugins;查看是否安裝成功 show plugins; # 第四步：加入前面創建好的復制組 start group_replication; select * from performance_schema.replication_group_members; # 13、查看mgr狀態 mysql> select * from performance_schema.replication_group_members; +---------------------------+--------------------------------------+-------------+-------------+--------------+-------------+----------------+ | CHANNEL_NAME | MEMBER_ID | MEMBER_HOST | MEMBER_PORT | MEMBER_STATE | MEMBER_ROLE | MEMBER_VERSION | +---------------------------+--------------------------------------+-------------+-------------+--------------+-------------+----------------+ | group_replication_applier | 81887515-6ded-11e9-a307-000c29508dcb | db143 | 3306 | ONLINE | SECONDARY | 8.0.16 | | group_replication_applier | 8f953e27-8c25-11e9-a39e-000c29c2e60a | db142 | 3306 | ONLINE | PRIMARY | 8.0.16 | | group_replication_applier | b2f0bfdc-87db-11e9-b83d-000c298bc91b | db145 | 3306 | ONLINE | SECONDARY | 8.0.16 | +---------------------------+--------------------------------------+-------------+-------------+--------------+-------------+----------------+ 3 rows in set (0.00 sec)
14、創建測試數據
create database test; use test; create table test(id int primary key,name varchar(10)); insert into test values(1,'jacky');
15、常見故障
############################### 常見故障 ############################### mysql> START GROUP_REPLICATION; ERROR 3092 (HY000): The server is notconfigured properly to be an active member of the group. Please see moredetails on error log. 【解決辦法】： mysql> SET GLOBALgroup_replication_bootstrap_group = ON; Query OK, 0 rows affected (0.00 sec) mysql> START GROUP_REPLICATION; Query OK, 0 rows affected (1.03 sec)
16、使用組復制的基礎要求
1、必須使用innodb引擎，沖突時要回滾，使用其他引擎可能會數據不一致。 2、每個表都要求顯示定義主鍵，用於沖突檢測識別。 3、開啟GTID，通過GTID來追蹤各事務在各機器上的情況 。 4、binlog使用row模式，確保各機器數據的一致性。 5、使用READ COMMITTED的隔離級別來規避Gap Locks。