ifcfg
ifcfg是一個簡單的腳本替換iconfig命令，它可以設置網絡接口的ip地址。
此命令的適用范圍：RedHat、RHEL、Ubuntu、CentOS、SUSE、openSUSE、Fedora。
1、語法
ifcfg [device] [cmd] [address]
device就是網卡設備，它可能有別名。cmd可以是add、delete、stop。address就是ip地址。
2、選項列表
無
3、實例
1）添加ip地址
| [root@localhost ~]# ifcfg eth0 add 192.168.0.250/24 //添加地址250
Forwarding is ON or its state is unknown (4). OK, No RDISC.
[root@localhost ~]#ifconfig //查看網絡信息
eth0 Link encap:Ethernet HWaddr 08:00:27:14:33:57
inet addr:192.168.0.250 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::a00:27ff:fe14:3357/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:107276 errors:0 dropped:0 overruns:0 frame:0
TX packets:72250 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:83580745 (79.7 MiB) TX bytes:5842176 (5.5 MiB)
|
2）刪除ip地址
| [root@localhost ~]# ifcfg eth0 delete 192.168.0.250/24 //刪除網卡地址
Forwarding is ON or its state is unknown (4). OK, No RDISC.
[root@localhost ~]# ifconfig //查看網卡信息，ip地址已經刪除
eth0 Link encap:Ethernet HWaddr 08:00:27:14:33:57
inet6 addr: fe80::a00:27ff:fe14:3357/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:107276 errors:0 dropped:0 overruns:0 frame:0
TX packets:72251 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:83580745 (79.7 MiB) TX bytes:5842218 (5.5 MiB)
|
