Arduino 操作OLED

 

https://item.taobao.com/item.htm?_u=n1qf7bf5beef&id=562158712128

1.模塊尺寸：35（L）*31（W）mm

2.電源電壓：2.8-5.0V DC

3.驅動芯片：SH1106

3.引腳定義：VCC--電源正極  GND --電源負極  SCL--串行時鍾  SDA---串行數據

 

4.測試平台：提供51 、arduino、STM32、STM8等單片機例程

5.重量：5g   

 

 

69. //U8G2_SSD1306_128X64_VCOMH0_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // same as the NONAME variant, but maximizes setContrast() range
70. //U8G2_SH1106_128X64_NONAME_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
71. U8G2_SH1106_128X64_NONAME_1_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE);
72. //U8G2_SH1106_128X64_VCOMH0_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // same as the NONAME variant, but maximizes setContrast() range
73. //U8G2_SSD1306_128X32_UNIVISION_1_SW_I2C u8g2(U8G2_R0, /* clock=*/ 21, /* data=*/ 20, /* reset=*/ U8X8_PIN_NONE); // Adafruit