mha vip配置切換

虛擬ip要手動啟動，在主庫故障后會自動轉移。
/usr/local/bin/masterha_ip_failover –command=start –ssh_user=root –orig_master_host=192.168.216.51 –orig_master_ip=192.168.216.51 –orig_master_port=3306 –new_master_host=192.168.216.51

 

主從重置同步

在主服務器上
mysql> show binlog events \G
從服務器
mysql> stop slave； #先停止slave服務
mysql> change master to master_log_file='mysql-bin-master.000001',master_log_pos=1174;
mysql>slave start; #啟動從服務器同步服務
mysql> show slave status\G; #用看一下從服務器的同步情況
Slave_IO_Running: Yes
Slave_SQL_Running: Yes

1.STOP SLAVE;    

2.FLUSH TABLES WITH READ LOCK;

 3.mysqldump -u root -p -databases db1 db2 > bak.sql    

4.RESET MASTER;    

RESET MASTER將刪除所有的二進制日志，創建一個.000001的空日志。   

5.UNLOCK TABLES;      

6.將master上的備份文件拷貝到slave服務器上

  scp -r [e-mail]:/root/bak.sql ./    

7.DROP DATABASE db1;

    DROP DATABASE db2;    

8.導入數據

  SOURCE /root/bak.sql;    

9.RESET SLAVE;

   RESET SLAVE將清除slave上的同步位置，刪除所有舊的同步日志，使用新的日志重新開始    

10.START SLAVE;

    大功告成，SHOW SLAVE STATUS\G 檢查同步狀態，一切正常。

 

 

手動切換vip

ssh  root@$orig_master_ip   /sbin/ifconfig  eth0:1 down

ssh  root@$new_master_ip   /sbin/ifconfig  eth0:1 10.1.5.21/24

 

 

1.在MHA Manager

vi /etc/masterha/app1/app1.cnf 中啟用下面三個參數：

 master_ip_failover_script= /etc/masterha/app1/master_ip_failover   #master failover時執行

#shutdown_script= /etc/masterha/power_manager

report_script= /etc/masterha/app1/send_report    #master failover時執行

master_ip_online_change_script=/etc/masterha/app1/master_ip_online_change   #master switchover時執行

第一個腳本

cat /etc/masterha/app1/master_ip_failover

#!/usr/bin/env perl
use strict;
use warnings FATAL =>'all';

use Getopt::Long;

my (
$command, $ssh_user, $orig_master_host, $orig_master_ip,
$orig_master_port, $new_master_host, $new_master_ip, $new_master_port
);

my $vip = '10.1.5.21/24'; # Virtual IP
my $key = "1";
my $ssh_start_vip = "/sbin/ifconfig eth0:$key $vip";
my $ssh_stop_vip = "/sbin/ifconfig eth0:$key down";
my $exit_code = 0;

GetOptions(
'command=s' => \$command,
'ssh_user=s' => \$ssh_user,
'orig_master_host=s' => \$orig_master_host,
'orig_master_ip=s' => \$orig_master_ip,
'orig_master_port=i' => \$orig_master_port,
'new_master_host=s' => \$new_master_host,
'new_master_ip=s' => \$new_master_ip,
'new_master_port=i' => \$new_master_port,
);

exit &main();

sub main {

#print "\n\nIN SCRIPT TEST====$ssh_stop_vip==$ssh_start_vip===\n\n";

if ( $command eq "stop" || $command eq "stopssh" ) {

# $orig_master_host, $orig_master_ip, $orig_master_port are passed.
# If you manage master ip address at global catalog database,
# invalidate orig_master_ip here.
my $exit_code = 1;
eval {
print "\n\n\n***************************************************************\n";
print "Disabling the VIP - $vip on old master: $orig_master_host\n";
print "***************************************************************\n\n\n\n";
&stop_vip();
$exit_code = 0;
};
if ($@) {
warn "Got Error: $@\n";
exit $exit_code;
}
exit $exit_code;
}
elsif ( $command eq "start" ) {

# all arguments are passed.
# If you manage master ip address at global catalog database,
# activate new_master_ip here.
# You can also grant write access (create user, set read_only=0, etc) here.
my $exit_code = 10;
eval {
print "\n\n\n***************************************************************\n";
print "Enabling the VIP - $vip on new master: $new_master_host \n";
print "***************************************************************\n\n\n\n";
&start_vip();
$exit_code = 0;
};
if ($@) {
warn $@;
exit $exit_code;
}
exit $exit_code;
}
elsif ( $command eq "status" ) {
print "Checking the Status of the script.. OK \n";
`ssh $ssh_user\@$orig_master_host \" $ssh_start_vip \"`;
exit 0;
}
else {
&usage();
exit 1;
}
}

# A simple system call that enable the VIP on the new master
sub start_vip() {
`ssh $ssh_user\@$new_master_host \" $ssh_start_vip \"`;
}
# A simple system call that disable the VIP on the old_master
sub stop_vip() {
`ssh $ssh_user\@$orig_master_host \" $ssh_stop_vip \"`;
}

sub usage {
print
"Usage: master_ip_failover –command=start|stop|stopssh|status –orig_master_host=host –orig_master_ip=ip –orig_master_port=po
rt –new_master_host=host –new_master_ip=ip –new_master_port=port\n";
}

第二個腳本

cat

/etc/masterha/app1/master_ip_online_change

#!/usr/bin/env perl
use strict;
use warnings FATAL =>'all';
 
use Getopt::Long;
 
my $vip = '10.1.5.21/24';  # Virtual IP
my $key = "1";
my $ssh_start_vip = "/sbin/ifconfig eth0:$key $vip";
my $ssh_stop_vip = "/sbin/ifconfig eth0:$key down";
my $exit_code = 0;
 
my (
  $command,              $orig_master_is_new_slave, $orig_master_host,
  $orig_master_ip,       $orig_master_port,         $orig_master_user,
  $orig_master_password, $orig_master_ssh_user,     $new_master_host,
  $new_master_ip,        $new_master_port,          $new_master_user,
  $new_master_password,  $new_master_ssh_user,
);
GetOptions(
  'command=s'                => \$command,
  'orig_master_is_new_slave' => \$orig_master_is_new_slave,
  'orig_master_host=s'       => \$orig_master_host,
  'orig_master_ip=s'         => \$orig_master_ip,
  'orig_master_port=i'       => \$orig_master_port,
  'orig_master_user=s'       => \$orig_master_user,
  'orig_master_password=s'   => \$orig_master_password,
  'orig_master_ssh_user=s'   => \$orig_master_ssh_user,
  'new_master_host=s'        => \$new_master_host,
  'new_master_ip=s'          => \$new_master_ip,
  'new_master_port=i'        => \$new_master_port,
  'new_master_user=s'        => \$new_master_user,
  'new_master_password=s'    => \$new_master_password,
  'new_master_ssh_user=s'    => \$new_master_ssh_user,
);
 
 
exit &main();
 
sub main {
 
#print "\n\nIN SCRIPT TEST====$ssh_stop_vip==$ssh_start_vip===\n\n";
 
if ( $command eq "stop" || $command eq "stopssh" ) {
 
        # $orig_master_host, $orig_master_ip, $orig_master_port are passed.
        # If you manage master ip address at global catalog database,
        # invalidate orig_master_ip here.
        my $exit_code = 1;
        eval {
            print "\n\n\n***************************************************************\n";
            print "Disabling the VIP - $vip on old master: $orig_master_host\n";
            print "***************************************************************\n\n\n\n";
&stop_vip();
            $exit_code = 0;
        };
        if ($@) {
            warn "Got Error: $@\n";
            exit $exit_code;
        }
        exit $exit_code;
}
elsif ( $command eq "start" ) {
 
        # all arguments are passed.
        # If you manage master ip address at global catalog database,
        # activate new_master_ip here.
        # You can also grant write access (create user, set read_only=0, etc) here.
my $exit_code = 10;
        eval {
            print "\n\n\n***************************************************************\n";
            print "Enabling the VIP - $vip on new master: $new_master_host \n";
            print "***************************************************************\n\n\n\n";
&start_vip();
            $exit_code = 0;
        };
        if ($@) {
            warn $@;
            exit $exit_code;
        }
        exit $exit_code;
}
elsif ( $command eq "status" ) {
        print "Checking the Status of the script.. OK \n";
        `ssh $orig_master_ssh_user\@$orig_master_host \" $ssh_start_vip \"`;
        exit 0;
}
else {
&usage();
        exit 1;
}
}
 
# A simple system call that enable the VIP on the new master
sub start_vip() {
`ssh $new_master_ssh_user\@$new_master_host \" $ssh_start_vip \"`;
}
# A simple system call that disable the VIP on the old_master
sub stop_vip() {
`ssh $orig_master_ssh_user\@$orig_master_host \" $ssh_stop_vip \"`;
}
 
sub usage {
print
"Usage: master_ip_failover –command=start|stop|stopssh|status –orig_master_host=host –orig_master_ip=ip –orig_master_port=po
rt –new_master_host=host –new_master_ip=ip –new_master_port=port\n";
}

第三個腳本

cat /etc/masterha/app1/send_report

#/bin/bash
source /root/.bash_profile
 
orig_master_host=`echo "$1" | awk -F = '{print $2}'`
new_master_host=`echo "$2" | awk -F = '{print $2}'`
new_slave_hosts=`echo "$3" | awk -F = '{print $2}'`
subject=`echo "$4" | awk -F = '{print $2}'`
body=`echo "$5" | awk -F = '{print $2}'`
 
#判斷日志結尾是否有successfully，有則表示切換成功，成功與否都發郵件。
tac /etc/masterha/app1/manager.log | sed -n 2p | grep 'successfully' > /dev/null
if [ $? -eq 0 ]
    then
    echo -e "MHA $subject 主從切換成功\n master:$orig_master_host --> $new_master_host \n $body \n 當前從庫:$new_slave_hosts" | mutt
 -s "MySQL實例宕掉,MHA $subject 切換成功" -- [e-mail]
else
    echo -e "MHA $subject 主從切換失敗\n master:$orig_master_host --> $new_master_host \n $body" | mutt -s "MySQL實例宕掉,MHA $subje
ct 切換失敗" -- [e-mail]
fi