Linux命令行安裝Oracle12c

本文轉載自查看原文 2018-07-04 09:31 18397 Linux運維

轉載：https://blog.csdn.net/sl1992/article/details/80457935
親測沒問題。

Linux命令行安裝Oracle12c

1.下載Oracle12c

下載Oracle12.2.0.1.0版本，選擇Linux x86-64安裝包

2.配置主機名和IP的映射

vi /etc/hosts，添加配置項192.168.1.200 solang //本機ip 和機器名稱

127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4 ::1 localhost localhost.localdomain localhost6 localhost6.localdomain6 192.168.1.200 solang //本機ip 和機器名稱

3.Oracle安裝的先決條件

參見Oracle Database 12c Release 2 (12.2) Installation On Oracle Linux 6 (OL6) and 7 (OL7)

Perform either the Automatic Setup or the Manual Setup to complete the
basic prerequisites. The Additional Setup is required for all installations.
執行自動設置或手動設置完成基本先決條件。所有安裝都需要進行附加設置。

這里我們選擇手動設置先決條件

3.1手動設置

3.1.1配置內核參數

[root@solang ~]# vi /etc/sysctl.conf

添加如下行：

fs.file-max = 6815744 kernel.sem = 250 32000 100 128 kernel.shmmni = 4096 kernel.shmall = 1073741824 kernel.shmmax = 4398046511104 kernel.panic_on_oops = 1 net.core.rmem_default = 262144 net.core.rmem_max = 4194304 net.core.wmem_default = 262144 net.core.wmem_max = 1048576 net.ipv4.conf.all.rp_filter = 2 net.ipv4.conf.default.rp_filter = 2 fs.aio-max-nr = 1048576 net.ipv4.ip_local_port_range = 9000 65500

運行sysctl -p命令更改當前內核參數

[root@solang ~]# sysctl -p net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.default.disable_ipv6 = 1 net.ipv6.conf.lo.disable_ipv6 = 1 vm.swappiness = 0 net.ipv4.neigh.default.gc_stale_time = 120 net.ipv4.conf.all.rp_filter = 0 net.ipv4.conf.default.rp_filter = 0 net.ipv4.conf.default.arp_announce = 2 net.ipv4.conf.lo.arp_announce = 2 net.ipv4.conf.all.arp_announce = 2 net.ipv4.tcp_max_tw_buckets = 5000 net.ipv4.tcp_syncookies = 1 net.ipv4.tcp_max_syn_backlog = 1024 net.ipv4.tcp_synack_retries = 2 fs.file-max = 6815744 kernel.sem = 250 32000 100 128 kernel.shmmni = 4096 kernel.shmall = 1073741824 kernel.shmmax = 4398046511104 kernel.panic_on_oops = 1 net.core.rmem_default = 262144 net.core.rmem_max = 4194304 net.core.wmem_default = 262144 net.core.wmem_max = 1048576 net.ipv4.conf.all.rp_filter = 2 net.ipv4.conf.default.rp_filter = 2 fs.aio-max-nr = 1048576 net.ipv4.ip_local_port_range = 9000 65500

3.1.2限制oracle用戶資源使用

[root@solang ~]# vi /etc/security/limits.conf

添加如下行：

oracle   soft nofile 1024 oracle hard nofile 65536 oracle soft nproc 16384 oracle hard nproc 16384 oracle soft stack 10240 oracle hard stack 32768 oracle hard memlock 134217728 oracle soft memlock 134217728

3.1.3安裝依賴軟件包

yum install binutils -y yum install compat-libcap1 -y yum install compat-libstdc++-33 -y yum install compat-libstdc++-33.i686 -y yum install glibc -y yum install glibc.i686 -y yum install glibc-devel -y yum install glibc-devel.i686 -y yum install ksh -y yum install libaio -y yum install libaio.i686 -y yum install libaio-devel -y yum install libaio-devel.i686 -y yum install libX11 -y yum install libX11.i686 -y yum install libXau -y yum install libXau.i686 -y yum install libXi -y yum install libXi.i686 -y yum install libXtst -y yum install libXtst.i686 -y yum install libgcc -y yum install libgcc.i686 -y yum install libstdc++ -y yum install libstdc++.i686 -y yum install libstdc++-devel -y yum install libstdc++-devel.i686 -y yum install libxcb -y yum install libxcb.i686 -y yum install make -y yum install nfs-utils -y yum install net-tools -y yum install smartmontools -y yum install sysstat -y yum install unixODBC -y yum install unixODBC-devel -y

3.1.4創建新組和新用戶

groupadd -g 54321 oinstall groupadd -g 54322 dba groupadd -g 54323 oper useradd -u 54321 -g oinstall -G dba,oper oracle [root@solang ~]# groupadd -g 54321 oinstall [root@solang ~]# groupadd -g 54322 dba [root@solang ~]# groupadd -g 54323 oper [root@solang ~]# useradd -u 54321 -g oinstall -G dba,oper oracle

不必非要按照叫oinstall，和dba，只不過一般文檔上就這么叫
oinstall組用於安裝數據庫
dba組用於管理數據庫
-g 表示這個用戶的主組
-G 標識這個用戶的其它組

一個用戶可以屬於多個用戶組，但是一個用戶只能指定一個組作為其主組

3.2附加設置

The following steps must be performed, whether you did the manual or automatic setup.
無論是手動還是自動設置，都必須執行以下步驟。

3.2.1為oracle用戶設置密碼

[oracle@solang ~]$ passwd oracle

3.2.2修改設置SELINUX

[root@solang ~]# vi /etc/selinux/config ## 將`SELINUX`修改為permissive SELINUX=permissive [root@solang ~]# setenforce Permissive setenforce: SELinux is disabled

3.2.3確保禁用防火牆

[root@solang ~]# systemctl stop firewalld [root@solang ~]# systemctl disable firewalld

3.2.4創建Oracle安裝目錄

[root@solang ~]# mkdir -p /usr/local/products/oracle12c [root@solang ~]# chown -R oracle:oinstall /usr/local [root@solang ~]# chmod -R 775 /usr/local/

也可以按照Oracle安裝文檔上的路徑進行設置

3.2.5配置Oracle環境變量並驗證

切換到新添加的oracle用戶名下，在oracle用戶下配置環境變量

[root@solang ~]# su oracle [oracle@solang ~]$ vi .bash_profile export TMP=/tmp export TMPDIR=$TMP export ORACLE_HOSTNAME=solang export ORACLE_UNQNAME=cdb1 export ORACLE_BASE=/usr/local/products export ORACLE_HOME=$ORACLE_BASE/oracle12c export ORACLE_SID=cdb1 export PATH=/usr/sbin:/usr/local/bin:$PATH export PATH=$ORACLE_HOME/bin:$PATH export LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib export CLASSPATH=$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib

使配置立即生效

[oracle@solang ~]$ source .bash_profile [oracle@solang ~]$ echo $ORACLE_HOME /usr/local/products/oracle12c

4.Oracle安裝

4.1上傳解壓

將下載的linuxx64_12201_database.zip上傳到Linux系統/home/oracle目錄下

解壓

[oracle@solang ~]$ unzip linuxx64_12201_database.zip

4.2修改響應文件

壓縮包解壓完成后得到名為database的文件夾，其中包含安裝文件。

[oracle@solang ~]$ cd database/response/ [oracle@solang response]$ vi db_install.rsp

此數據庫安裝響應文件db_install.rsp修改的地方，參見Oracle Universal Installer (OUI) Silent Installations中12cR2進行設置

oracle.install.option=INSTALL_DB_SWONLY UNIX_GROUP_NAME=oinstall INVENTORY_LOCATION=/usr/local/products/oracle12c/oraInventory ORACLE_HOME=/usr/local/products/oracle12c ORACLE_BASE=/usr/local/products oracle.install.db.InstallEdition=EE oracle.install.db.OSDBA_GROUP=dba oracle.install.db.OSBACKUPDBA_GROUP=dba oracle.install.db.OSDGDBA_GROUP=dba oracle.install.db.OSKMDBA_GROUP=dba oracle.install.db.OSRACDBA_GROUP=dba

由於安裝時本人將指定保存清單文件的位置設置到了$ORACLE_BASE目錄下，出現了警告

WARNING The Central Inventory is located in the Oracle base.
ACTION: Oracle recommends placing this Central Inventory in a location outside the Oracle base directory.
警告中央清單位於Oracle base中。
操作：Oracle建議將此中央清單放在Oracle基本目錄之外的位置。

建議將清單文件位置修改為INVENTORY_LOCATION=/usr/local/oraInventory，不在$ORACLE_BASE目錄下即可。

注意：如果不想修改db_install.rsp，可以采用命令行方式直接指定參數進行安裝，參見4.3靜默安裝Oracle

db_install.rsp完整內容如下

#################################################################### ## Copyright(c) Oracle Corporation 1998,2017. All rights reserved.## ## ## ## Specify values for the variables listed below to customize ## ## your installation. ## ## ## ## Each variable is associated with a comment. The comment ## ## can help to populate the variables with the appropriate ## ## values. ## ## ## ## IMPORTANT NOTE: This file contains plain text passwords and ## ## should be secured to have read permission only by oracle user ## ## or db administrator who owns this installation. ## ## ## #################################################################### #------------------------------------------------------------------------------- # Do not change the following system generated value. #------------------------------------------------------------------------------- oracle.install.responseFileVersion=/oracle/install/rspfmt_dbinstall_response_schema_v12.2.0 #------------------------------------------------------------------------------- # Specify the installation option. # It can be one of the following: # - INSTALL_DB_SWONLY # - INSTALL_DB_AND_CONFIG # - UPGRADE_DB #------------------------------------------------------------------------------- oracle.install.option=INSTALL_DB_SWONLY #------------------------------------------------------------------------------- # Specify the Unix group to be set for the inventory directory. #------------------------------------------------------------------------------- UNIX_GROUP_NAME=oinstall #------------------------------------------------------------------------------- # Specify the location which holds the inventory files. # This is an optional parameter if installing on # Windows based Operating System. #------------------------------------------------------------------------------- INVENTORY_LOCATION=/usr/local/products/oracle12c/oraInventory #------------------------------------------------------------------------------- # Specify the complete path of the Oracle Home. #------------------------------------------------------------------------------- ORACLE_HOME=/usr/local/products/oracle12c #------------------------------------------------------------------------------- # Specify the complete path of the Oracle Base. #------------------------------------------------------------------------------- ORACLE_BASE=/usr/local/products #------------------------------------------------------------------------------- # Specify the installation edition of the component. # # The value should contain only one of these choices. # - EE : Enterprise Edition # - SE2 : Standard Edition 2 #------------------------------------------------------------------------------- oracle.install.db.InstallEdition=EE ############################################################################### # # # PRIVILEGED OPERATING SYSTEM GROUPS # # ------------------------------------------ # # Provide values for the OS groups to which SYSDBA and SYSOPER privileges # # needs to be granted. If the install is being performed as a member of the # # group "dba", then that will be used unless specified otherwise below. # # # # The value to be specified for OSDBA and OSOPER group is only for UNIX based # # Operating System. # # # ############################################################################### #------------------------------------------------------------------------------ # The OSDBA_GROUP is the OS group which is to be granted SYSDBA privileges. #------------------------------------------------------------------------------- oracle.install.db.OSDBA_GROUP=dba #------------------------------------------------------------------------------ # The OSOPER_GROUP is the OS group which is to be granted SYSOPER privileges. # The value to be specified for OSOPER group is optional. #------------------------------------------------------------------------------ oracle.install.db.OSOPER_GROUP=dba #------------------------------------------------------------------------------ # The OSBACKUPDBA_GROUP is the OS group which is to be granted SYSBACKUP privileges. #------------------------------------------------------------------------------ oracle.install.db.OSBACKUPDBA_GROUP=dba #------------------------------------------------------------------------------ # The OSDGDBA_GROUP is the OS group which is to be granted SYSDG privileges. #------------------------------------------------------------------------------ oracle.install.db.OSDGDBA_GROUP=dba #------------------------------------------------------------------------------ # The OSKMDBA_GROUP is the OS group which is to be granted SYSKM privileges. #------------------------------------------------------------------------------ oracle.install.db.OSKMDBA_GROUP=dba #------------------------------------------------------------------------------ # The OSRACDBA_GROUP is the OS group which is to be granted SYSRAC privileges. #------------------------------------------------------------------------------ oracle.install.db.OSRACDBA_GROUP=dba ############################################################################### # # # Grid Options # # # ############################################################################### #------------------------------------------------------------------------------ # Specify the type of Real Application Cluster Database # # - ADMIN_MANAGED: Admin-Managed # - POLICY_MANAGED: Policy-Managed # # If left unspecified, default will be ADMIN_MANAGED #------------------------------------------------------------------------------ oracle.install.db.rac.configurationType= #------------------------------------------------------------------------------ # Value is required only if RAC database type is ADMIN_MANAGED # # Specify the cluster node names selected during the installation. # Leaving it blank will result in install on local server only (Single Instance) # # Example : oracle.install.db.CLUSTER_NODES=node1,node2 #------------------------------------------------------------------------------ oracle.install.db.CLUSTER_NODES= #------------------------------------------------------------------------------ # This variable is used to enable or disable RAC One Node install. # # - true : Value of RAC One Node service name is used. # - false : Value of RAC One Node service name is not used. # # If left blank, it will be assumed to be false. #------------------------------------------------------------------------------ oracle.install.db.isRACOneInstall= #------------------------------------------------------------------------------ # Value is required only if oracle.install.db.isRACOneInstall is true. # # Specify the name for RAC One Node Service #------------------------------------------------------------------------------ oracle.install.db.racOneServiceName= #------------------------------------------------------------------------------ # Value is required only if RAC database type is POLICY_MANAGED # # Specify a name for the new Server pool that will be configured # Example : oracle.install.db.rac.serverpoolName=pool1 #------------------------------------------------------------------------------ oracle.install.db.rac.serverpoolName= #------------------------------------------------------------------------------ # Value is required only if RAC database type is POLICY_MANAGED # # Specify a number as cardinality for the new Server pool that will be configured # Example : oracle.install.db.rac.serverpoolCardinality=2 #------------------------------------------------------------------------------ oracle.install.db.rac.serverpoolCardinality= ############################################################################### # # # Database Configuration Options # # # ############################################################################### #------------------------------------------------------------------------------- # Specify the type of database to create. # It can be one of the following: # - GENERAL_PURPOSE # - DATA_WAREHOUSE # GENERAL_PURPOSE: A starter database designed for general purpose use or transaction-heavy applications. # DATA_WAREHOUSE : A starter database optimized for data warehousing applications. #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.type= #------------------------------------------------------------------------------- # Specify the Starter Database Global Database Name. #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.globalDBName= #------------------------------------------------------------------------------- # Specify the Starter Database SID. #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.SID= #------------------------------------------------------------------------------- # Specify whether the database should be configured as a Container database. # The value can be either "true" or "false". If left blank it will be assumed # to be "false". #------------------------------------------------------------------------------- oracle.install.db.ConfigureAsContainerDB= #------------------------------------------------------------------------------- # Specify the Pluggable Database name for the pluggable database in Container Database. #------------------------------------------------------------------------------- oracle.install.db.config.PDBName= #------------------------------------------------------------------------------- # Specify the Starter Database character set. # # One of the following # AL32UTF8, WE8ISO8859P15, WE8MSWIN1252, EE8ISO8859P2, # EE8MSWIN1250, NE8ISO8859P10, NEE8ISO8859P4, BLT8MSWIN1257, # BLT8ISO8859P13, CL8ISO8859P5, CL8MSWIN1251, AR8ISO8859P6, # AR8MSWIN1256, EL8ISO8859P7, EL8MSWIN1253, IW8ISO8859P8, # IW8MSWIN1255, JA16EUC, JA16EUCTILDE, JA16SJIS, JA16SJISTILDE, # KO16MSWIN949, ZHS16GBK, TH8TISASCII, ZHT32EUC, ZHT16MSWIN950, # ZHT16HKSCS, WE8ISO8859P9, TR8MSWIN1254, VN8MSWIN1258 #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.characterSet= #------------------------------------------------------------------------------ # This variable should be set to true if Automatic Memory Management # in Database is desired. # If Automatic Memory Management is not desired, and memory allocation # is to be done manually, then set it to false. #------------------------------------------------------------------------------ oracle.install.db.config.starterdb.memoryOption= #------------------------------------------------------------------------------- # Specify the total memory allocation for the database. Value(in MB) should be # at least 256 MB, and should not exceed the total physical memory available # on the system. # Example: oracle.install.db.config.starterdb.memoryLimit=512 #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.memoryLimit= #------------------------------------------------------------------------------- # This variable controls whether to load Example Schemas onto # the starter database or not. # The value can be either "true" or "false". If left blank it will be assumed # to be "false". #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.installExampleSchemas= ############################################################################### # # # Passwords can be supplied for the following four schemas in the # # starter database: # # SYS # # SYSTEM # # DBSNMP (used by Enterprise Manager) # # # # Same password can be used for all accounts (not recommended) # # or different passwords for each account can be provided (recommended) # # # ############################################################################### #------------------------------------------------------------------------------ # This variable holds the password that is to be used for all schemas in the # starter database. #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.password.ALL= #------------------------------------------------------------------------------- # Specify the SYS password for the starter database. #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.password.SYS= #------------------------------------------------------------------------------- # Specify the SYSTEM password for the starter database. #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.password.SYSTEM= #------------------------------------------------------------------------------- # Specify the DBSNMP password for the starter database. # Applicable only when oracle.install.db.config.starterdb.managementOption=CLOUD_CONTROL #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.password.DBSNMP= #------------------------------------------------------------------------------- # Specify the PDBADMIN password required for creation of Pluggable Database in the Container Database. #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.password.PDBADMIN= #------------------------------------------------------------------------------- # Specify the management option to use for managing the database. # Options are: # 1. CLOUD_CONTROL - If you want to manage your database with Enterprise Manager Cloud Control along with Database Express. # 2. DEFAULT -If you want to manage your database using the default Database Express option. #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.managementOption= #------------------------------------------------------------------------------- # Specify the OMS host to connect to Cloud Control. # Applicable only when oracle.install.db.config.starterdb.managementOption=CLOUD_CONTROL #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.omsHost= #------------------------------------------------------------------------------- # Specify the OMS port to connect to Cloud Control. # Applicable only when oracle.install.db.config.starterdb.managementOption=CLOUD_CONTROL #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.omsPort= #------------------------------------------------------------------------------- # Specify the EM Admin user name to use to connect to Cloud Control. # Applicable only when oracle.install.db.config.starterdb.managementOption=CLOUD_CONTROL #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.emAdminUser= #------------------------------------------------------------------------------- # Specify the EM Admin password to use to connect to Cloud Control. # Applicable only when oracle.install.db.config.starterdb.managementOption=CLOUD_CONTROL #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.emAdminPassword= ############################################################################### # # # SPECIFY RECOVERY OPTIONS # # ------------------------------------ # # Recovery options for the database can be mentioned using the entries below # # # ############################################################################### #------------------------------------------------------------------------------ # This variable is to be set to false if database recovery is not required. Else # this can be set to true. #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.enableRecovery= #------------------------------------------------------------------------------- # Specify the type of storage to use for the database. # It can be one of the following: # - FILE_SYSTEM_STORAGE # - ASM_STORAGE #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.storageType= #------------------------------------------------------------------------------- # Specify the database file location which is a directory for datafiles, control # files, redo logs. # # Applicable only when oracle.install.db.config.starterdb.storage=FILE_SYSTEM_STORAGE #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.fileSystemStorage.dataLocation= #------------------------------------------------------------------------------- # Specify the recovery location. # # Applicable only when oracle.install.db.config.starterdb.storage=FILE_SYSTEM_STORAGE #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.fileSystemStorage.recoveryLocation= #------------------------------------------------------------------------------- # Specify the existing ASM disk groups to be used for storage. # # Applicable only when oracle.install.db.config.starterdb.storageType=ASM_STORAGE #------------------------------------------------------------------------------- oracle.install.db.config.asm.diskGroup= #------------------------------------------------------------------------------- # Specify the password for ASMSNMP user of the ASM instance. # # Applicable only when oracle.install.db.config.starterdb.storage=ASM_STORAGE #------------------------------------------------------------------------------- oracle.install.db.config.asm.ASMSNMPPassword= #------------------------------------------------------------------------------ # Specify the My Oracle Support Account Username. # # Example : MYORACLESUPPORT_USERNAME=abc@oracle.com #------------------------------------------------------------------------------ MYORACLESUPPORT_USERNAME= #------------------------------------------------------------------------------ # Specify the My Oracle Support Account Username password. # # Example : MYORACLESUPPORT_PASSWORD=password #------------------------------------------------------------------------------ MYORACLESUPPORT_PASSWORD= #------------------------------------------------------------------------------ # Specify whether to enable the user to set the password for # My Oracle Support credentials. The value can be either true or false. # If left blank it will be assumed to be false. # # Example : SECURITY_UPDATES_VIA_MYORACLESUPPORT=true #------------------------------------------------------------------------------ SECURITY_UPDATES_VIA_MYORACLESUPPORT= #------------------------------------------------------------------------------ # Specify whether user doesn't want to configure Security Updates. # The value for this variable should be true if you don't want to configure # Security Updates, false otherwise. # # The value can be either true or false. If left blank it will be assumed # to be true. # # Example : DECLINE_SECURITY_UPDATES=false #------------------------------------------------------------------------------ DECLINE_SECURITY_UPDATES= #------------------------------------------------------------------------------ # Specify the Proxy server name. Length should be greater than zero. # # Example : PROXY_HOST=proxy.domain.com #------------------------------------------------------------------------------ PROXY_HOST= #------------------------------------------------------------------------------ # Specify the proxy port number. Should be Numeric and at least 2 chars. # # Example : PROXY_PORT=25 #------------------------------------------------------------------------------ PROXY_PORT= #------------------------------------------------------------------------------ # Specify the proxy user name. Leave PROXY_USER and PROXY_PWD # blank if your proxy server requires no authentication. # # Example : PROXY_USER=username #------------------------------------------------------------------------------ PROXY_USER= #------------------------------------------------------------------------------ # Specify the proxy password. Leave PROXY_USER and PROXY_PWD # blank if your proxy server requires no authentication. # # Example : PROXY_PWD=password #------------------------------------------------------------------------------ PROXY_PWD= #------------------------------------------------------------------------------ # Specify the Oracle Support Hub URL. # # Example : COLLECTOR_SUPPORTHUB_URL=https://orasupporthub.company.com:8080/ #------------------------------------------------------------------------------ COLLECTOR_SUPPORTHUB_URL=

4.3靜默安裝Oracle

靜默安裝參見Oracle Universal Installer (OUI) Silent Installations，找到12cR2的安裝方式進行安裝

①命令行方式安裝

An alternative to the response file approach is to specify all the parameter values directly on the command line. For simple actions, this looks a lot clearer as you only have to specify non-default values for the action you are trying to perform.
響應文件方法的另一種方式是在命令行上直接指定所有的參數值。對於簡單的操作，這看起來更清楚，因為您只需為正在執行的操作指定非默認值。

[oracle@solang response]$ cd ~/database
[oracle@solang database]$ ./runInstaller -ignoreSysPrereqs -ignorePrereq -waitforcompletion \
-showProgress -silent -responseFile /home/oracle/database/response/db_install.rsp \ oracle.install.option=INSTALL_DB_SWONLY \ UNIX_GROUP_NAME=oinstall \ INVENTORY_LOCATION=/usr/local/products/oracle12c/oraInventory \ ORACLE_HOME=/usr/local/products/oracle12c \ ORACLE_BASE=/usr/local/products \ oracle.install.db.InstallEdition=EE \ oracle.install.db.OSDBA_GROUP=dba \ oracle.install.db.OSBACKUPDBA_GROUP=dba \ oracle.install.db.OSDGDBA_GROUP=dba \ oracle.install.db.OSKMDBA_GROUP=dba \ oracle.install.db.OSRACDBA_GROUP=dba

②響應文件方式安裝

[oracle@solang response]$ cd ~/database
[oracle@solang database]$ ./runInstaller -ignoreSysPrereqs -ignorePrereq -waitforcompletion \
-showProgress -silent -responseFile /home/oracle/database/response/db_install.rsp

Starting Oracle Universal Installer...

Checking Temp space: must be greater than 500 MB. Actual 21922 MB Passed Checking swap space: must be greater than 150 MB. Actual 511 MB Passed Preparing to launch Oracle Universal Installer from /tmp/OraInstall2018-05-25_04-36-06PM. Please wait ...WARNING The Central Inventory is located in the Oracle base. ACTION: Oracle recommends placing this Central Inventory in a location outside the Oracle base directory. You can find the log of this install session at: /usr/local/products/oracle12c/oraInventory/logs/installActions2018-05-25_04-36-06PM.log Prepare in progress. .................................................. 8% Done. Prepare successful. Copy files in progress. .................................................. 17% Done. .................................................. 22% Done. .................................................. 27% Done. .................................................. 32% Done. .................................................. 40% Done. .................................................. 45% Done. .................................................. 50% Done. .................................................. 55% Done. .................................................. 60% Done. .................................................. 65% Done. .................................................. 70% Done. .................................................. 75% Done. .................................................. 80% Done. .................... Copy files successful. Link binaries in progress. .......... Link binaries successful. Setup files in progress. .............................. Setup files successful. Setup Inventory in progress. Setup Inventory successful. Finish Setup successful. The installation of Oracle Database 12c was successful. Please check '/usr/local/products/oracle12c/oraInventory/logs/silentInstall2018-05-25_04-36-06PM.log' for more details. Setup Oracle Base in progress. Setup Oracle Base successful. .................................................. 95% Done. As a root user, execute the following script(s): 1. /usr/local/products/oracle12c/oraInventory/orainstRoot.sh 2. /usr/local/products/oracle12c/root.sh .................................................. 100% Done. Successfully Setup Software.

安裝完畢后切換到root用戶執行以下腳本

As a root user, execute the following script(s):
/usr/local/products/oracle12c/oraInventory/orainstRoot.sh
/usr/local/products/oracle12c/root.sh

[oracle@solang ~]$ su
[root@solang ~]# /usr/local/products/oracle12c/oraInventory/orainstRoot.sh Changing permissions of /usr/local/products/oracle12c/oraInventory. Adding read,write permissions for group. Removing read,write,execute permissions for world. Changing groupname of /usr/local/products/oracle12c/oraInventory to oinstall. The execution of the script is complete. [root@solang ~]# /usr/local/products/oracle12c/root.sh Check /usr/local/products/oracle12c/install/root_solang2018-05-2516-45-15-468131776.log for the output of root script

執行命令sqlplus / as sysdba

[oracle@solang ~]$ sqlplus / as sysdba

SQL*Plus: Release 12.2.0.1.0 Production on Sun May 27 11:52:01 2018 Copyright (c) 1982, 2016, Oracle. All rights reserved. Connected to an idle instance. SQL>

此時數據庫軟件安裝成功。

5.數據庫創建

參見Database Configuration Assistant (DBCA) : Creating Databases in Silent Mode，使用數據庫配置助手DBCA靜默模式下創建數據庫，具體設置參見Database Configuration Assistant Command Reference for Silent Mode

執行命令

dbca -silent -createDatabase \
 -templateName /usr/local/products/oracle12c/assistants/dbca/templates/General_Purpose.dbc \ -gdbname cdb1 -sid cdb1 -responseFile /home/oracle/database/response/dbca.rsp \ -characterSet AL32UTF8 \ -sysPassword OraPasswd1 \ -systemPassword OraPasswd1 \ -createAsContainerDatabase true \ -numberOfPDBs 1 \ -pdbName pdb1 \ -pdbAdminPassword OraPasswd1 \ -automaticMemoryManagement false \ -ignorePreReqs

數據文件目錄datafileDestination默認安裝在$ORACLE_BASE/oradata下

注意:密碼設置需要密碼長度至少8位，包含至少1個大寫字符，1個小寫字符和1個數字[0-9]。
否則會有如下警告：

[WARNING] [DBT-06208] The 'SYS' password entered does not conform to the Oracle recommended standards. CAUSE: a. Oracle recommends that the password entered should be at least 8 characters in length, contain at least 1 uppercase character, 1 lower case character and 1 digit [0-9]. b.The password entered is a keyword that Oracle does not recommend to be used as password ACTION: Specify a strong password. If required refer Oracle documentation for guidelines. [WARNING] [DBT-06208] The 'SYSTEM' password entered does not conform to the Oracle recommended standards. CAUSE: a. Oracle recommends that the password entered should be at least 8 characters in length, contain at least 1 uppercase character, 1 lower case character and 1 digit [0-9]. b.The password entered is a keyword that Oracle does not recommend to be used as password ACTION: Specify a strong password. If required refer Oracle documentation for guidelines. [WARNING] [DBT-06208] The 'PDBADMIN' password entered does not conform to the Oracle recommended standards. CAUSE: a. Oracle recommends that the password entered should be at least 8 characters in length, contain at least 1 uppercase character, 1 lower case character and 1 digit [0-9]. b.The password entered is a keyword that Oracle does not recommend to be used as password ACTION: Specify a strong password. If required refer Oracle documentation for guidelines.

執行

[oracle@solang ~]$ dbca -silent -createDatabase \ > -templateName /usr/local/products/oracle12c/assistants/dbca/templates/General_Purpose.dbc \ > -gdbname cdb1 -sid cdb1 -responseFile /home/oracle/database/response/dbca.rsp \ > -characterSet AL32UTF8 \ > -sysPassword OraPasswd1 \ > -systemPassword OraPasswd1 \ > -createAsContainerDatabase true \ > -numberOfPDBs 1 \ > -pdbName pdb1 \ > -pdbAdminPassword OraPasswd1 \ > -automaticMemoryManagement false \ > -ignorePreReqs Copying database files 1% complete 13% complete 25% complete Creating and starting Oracle instance 26% complete 30% complete 31% complete 35% complete 38% complete 39% complete 41% complete Completing Database Creation 42% complete 43% complete 44% complete 46% complete 49% complete 50% complete Creating Pluggable Databases 55% complete 75% complete Executing Post Configuration Actions 100% complete Look at the log file "/usr/local/products/cfgtoollogs/dbca/cdb1/cdb1.log" for further details.

再次執行命令sqlplus / as sysdba

[oracle@solang ~]$ sqlplus / as sysdba

SQL*Plus: Release 12.2.0.1.0 Production on Sun May 27 15:28:18 2018

Copyright (c) 1982, 2016, Oracle.  All rights reserved.


Connected to:
Oracle Database 12c Enterprise Edition Release 12.2.0.1.0 - 64bit Production

SQL> select status from v$instance;

STATUS ------------ OPEN SQL>

此時數據庫創建成功。

6.數據庫監聽配置

未配置監聽前執行lsnrctl status

[oracle@solang ~]$ lsnrctl status LSNRCTL for Linux: Version 12.2.0.1.0 - Production on 27-MAY-2018 17:20:08 Copyright (c) 1991, 2016, Oracle. All rights reserved. Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521)) TNS-12541: TNS:no listener TNS-12560: TNS:protocol adapter error TNS-00511: No listener Linux Error: 111: Connection refused

使用默認的netca.rsp文件
執行命令netca -silent -responseFile /home/oracle/database/response/netca.rsp

[oracle@solang ~]$ netca -silent -responseFile /home/oracle/database/response/netca.rsp

Parsing command line arguments:
    Parameter "silent" = true Parameter "responsefile" = /home/oracle/database/response/netca.rsp Done parsing command line arguments. Oracle Net Services Configuration: Profile configuration complete. Oracle Net Listener Startup: Running Listener Control: /usr/local/products/oracle12c/bin/lsnrctl start LISTENER Listener Control complete. Listener started successfully. Listener configuration complete. Oracle Net Services configuration successful. The exit code is 0

再次執行命令lsnrctl status

[oracle@solang ~]$ lsnrctl status

LSNRCTL for Linux: Version 12.2.0.1.0 - Production on 27-MAY-2018 18:04:32

Copyright (c) 1991, 2016, Oracle.  All rights reserved.

Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=solang)(PORT=1521)))
STATUS of the LISTENER
------------------------ Alias LISTENER Version TNSLSNR for Linux: Version 12.2.0.1.0 - Production Start Date 27-MAY-2018 18:03:02 Uptime 0 days 0 hr. 1 min. 30 sec Trace Level off Security ON: Local OS Authentication SNMP OFF Listener Parameter File /usr/local/products/oracle12c/network/admin/listener.ora Listener Log File /usr/local/products/diag/tnslsnr/solang/listener/alert/log.xml Listening Endpoints Summary... (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=solang)(PORT=1521))) (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521))) Services Summary... Service "6d2bd82e6b445902e053f05313acb216" has 1 instance(s). Instance "cdb1", status READY, has 1 handler(s) for this service... Service "cdb1" has 1 instance(s). Instance "cdb1", status READY, has 1 handler(s) for this service... Service "cdb1XDB" has 1 instance(s). Instance "cdb1", status READY, has 1 handler(s) for this service... Service "pdb1" has 1 instance(s). Instance "cdb1", status READY, has 1 handler(s) for this service... The command completed successfully

此時數據庫監聽配置成功。

參見Configuring the Network Environment
啟動或關閉監聽

lsnrctl start lsnrctl stop

本文參考:
Oracle Database 12c Release 2 (12.2) Installation On Oracle Linux 6 (OL6) and 7 (OL7)
Oracle Universal Installer (OUI) Silent Installations
Database Configuration Assistant (DBCA) : Creating Databases in Silent Mode
Database Configuration Assistant Command Reference for Silent Mode
Database Administrator’s Guide
Oracle Database Documentation
CentOS下裝oracle 12c(命令行模式安裝）
Configuring the Network Environment
Automating Database Startup and Shutdown on Linux

免責聲明！

本站轉載的文章為個人學習借鑒使用，本站對版權不負任何法律責任。如果侵犯了您的隱私權益，請聯系本站郵箱yoyou2525@163.com刪除。

猜您在找 Oracle12C linux靜默安裝在Linux下安裝Oracle12c WebLogic 12c Linux 命令行靜默安裝 RedHat Enterprise Linux7.0安裝Oracle12c linux CentOS7安裝oracle12c Linux 上安裝Oracle12C 數據庫流程 Linux下安裝Oracle12C詳解 oracle在linux下的命令行安裝 centos安裝oracle12c單實例 Centos下安裝Oracle12c