為KVM虛擬機增加網卡

用virt install 完成虛擬機的安裝后，發現里面只有一塊網卡，有些時候我們需要兩塊或多塊網卡怎么辦？ 可以通過virsh attach-iterface來實現

例如原來的ubuntu虛擬機是這樣的， 只有一塊網卡：

test@test-Lenovo-Product:~$ virsh domiflist ubuntu1604-test-vm1
Interface  Type       Source     Model       MAC
-------------------------------------------------------
vnet0      bridge     virbr0     virtio      52:54:00:34:06:26

test@ubuntu1604-test-vm1:~$ ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: ens3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether 52:54:00:34:06:26 brd ff:ff:ff:ff:ff:ff
    inet 192.168.122.2/24 brd 192.168.122.255 scope global ens3
       valid_lft forever preferred_lft forever
    inet6 fe80::5054:ff:fe34:626/64 scope link
       valid_lft forever preferred_lft forever

添加網卡有兩種途徑：

1 動態的增加網卡，當時生效，但是虛擬機重啟以后就沒有了

test@test-Lenovo-Product:~$ virsh attach-interface ubuntu1604-test-vm1 --type bridge --source virbr0
Interface attached successfully

test@test-Lenovo-Product:~$ virsh domiflist
Interface  Type       Source     Model       MAC
-------------------------------------------------------
vnet0      bridge     virbr0     virtio      52:54:00:34:06:26
vnet1      bridge     virbr0     rtl8139     52:54:00:9c:c4:dd

test@ubuntu1604-test-vm1:~$ ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: ens3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether 52:54:00:34:06:26 brd ff:ff:ff:ff:ff:ff
    inet 192.168.122.2/24 brd 192.168.122.255 scope global ens3
       valid_lft forever preferred_lft forever
    inet6 fe80::5054:ff:fe34:626/64 scope link
       valid_lft forever preferred_lft forever
3: ens7: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 52:54:00:9c:c4:dd brd ff:ff:ff:ff:ff:ff

 

2 方式二，通過修改配置文件的方式永久的增加網卡

test@test-Lenovo-Product:~$ virsh attach-interface ubuntu1604-test-vm1 --type bridge --source virbr0 --config
Interface attached successfully

test@test-Lenovo-Product:~$ virsh domiflist ubuntu1604-test-vm1
Interface  Type       Source     Model       MAC
-------------------------------------------------------
vnet0      bridge     virbr0     virtio      52:54:00:34:06:26

 

雖然這時沒有virsh domiflist沒有列出來新增加的interface，登陸進虛擬機也沒看到ip， 但是 virsh edit ubuntu1604-test-vm1 可以看到多了一個網卡

<interface type='bridge'>
      <mac address='52:54:00:34:06:26'/>
      <source bridge='virbr0'/>
      <model type='virtio'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/>
    </interface>
    <interface type='bridge'>
      <mac address='52:54:00:ab:2d:39'/>
      <source bridge='virbr0'/>
      <model type='rtl8139'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0'/>
    </interface>

經過重啟后，可以看到網卡已被永久加上：

 

virsh shutdown ubuntu1604-test-vm1

virsh start domiflist ubuntu1604-test-vm1

test@test-Lenovo-Product:~$ virsh domiflist ubuntu1604-test-vm1
Interface  Type       Source     Model       MAC
-------------------------------------------------------
vnet0      bridge     virbr0     virtio      52:54:00:34:06:26
vnet1      bridge     virbr0     rtl8139     52:54:00:ab:2d:39

test@ubuntu1604-test-vm1:~$ ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: ens3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether 52:54:00:34:06:26 brd ff:ff:ff:ff:ff:ff
    inet 192.168.122.2/24 brd 192.168.122.255 scope global ens3
       valid_lft forever preferred_lft forever
    inet6 fe80::5054:ff:fe34:626/64 scope link
       valid_lft forever preferred_lft forever
3: ens7: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 52:54:00:ab:2d:39 brd ff:ff:ff:ff:ff:ff
 

3 如果網卡不用了想刪掉，就用下面命令， 重啟后就可生效

virsh detach-interface ubuntu1604-test-vm1 --type bridge --mac 52:54:00:ab:2d:39 --config
Interface detached successfully