Python 串口通信操作

下載  pyserial包 https://pypi.python.org/packages/source/p/pyserial/pyserial-2.7.tar.gz#md5=794506184df83ef2290de0d18803dd11

然后解壓,例如解壓到D:/pyserial.打開cmd，cd 指令切換到D:\pyserial下。執行安裝指令 python setup.py install

編寫測試代碼。

def OpenCom(self,*args):
        #設置端口和波特率
        selComPort =‘com2’
        #波特率
        selBaudRate =9600
       #奇偶校驗
        selParity = 'N'
        try:
            if(not self.mySerial):
                self.mySerial = serial.Serial(port=selComPort, baudrate=selBaudRate,bytesize=8,parity=selParity,stopbits=1,timeout=5)
            else:
                if(self.mySerial.isOpen()):
                    self.mySerial.close()
                    self.mySerial = serial.Serial(port=selComPort, baudrate=selBaudRate, bytesize=8, parity=selParity, stopbits=1, timeout=5)
            self.lblInfo['text'] = '打開成功！'
        except Exception as ex:
            self.lblInfo['text'] = '打開失敗！'

#使用com口發送modbus協議給終端設備。

    def btnEmId_Click(self):

         barray = bytearray([0x05, 0x03, 0xA#, 0x54, 0x00, 0x08])

        vOldEmId = self.txbOldEmId.get()

        vNewEmId = self.txbNewEmId.get()

        barray[0] = int(vOldEmId)

        barray[5] = int(vNewEmId)

       #crc校驗

        strInput  = utils.crc16_append(barray)

        print(barray)

        n = self.mySerial.write(barray)

        if(n > 0):

            str = self.mySerial.readall()

            self.lblInfo['text'] = 'success！'

            # for s in str:

            #     print (hex(s))

        else:

　　　　self.lblInfo['text'] = 'error！'