1.要是直接運行manage.py程序的話 會提示一大堆東西，那無非是提示沒有傳入參數。先打開mange.py，然后再運行，會提示一堆東西，表示沒有配置參數。在pycharm右上角
點擊edit configurations 編輯配置參數。
2.點開之后彈出如下對話框，在scrip parameters 對應的對話框中輸入配置參數 runserver 0.0.0.0:8000.配置完成之后點擊ok就完成了。
3.配置完以上信息之后，直接按Ctrl+shift+F10 運行一下manage.py文件：出現如下結果，表示配置成功。
D:\workpace\Python\PythonIDE\python.exe D:/Code/Python/Django/manage.py runserver 0.0.0.0:8000
Performing system checks...
System check identified no issues (0 silenced).
You have 13 unapplied migration(s). Your project may not work properly until you apply the migrations for app(s): admin, auth, contenttypes, sessions.
Run 'python manage.py migrate' to apply them.
November 26, 2017 - 11:40:48
Django version 1.11.7, using settings 'Django.settings'
Starting development server at http://0.0.0.0:8000/
Quit the server with CTRL-BREAK.