python3--open函數

open函數，該函數用於文件處理

操作文件時，一般需要經歷如下步驟：

• 打開文件
• 操作文件

一、打開文件

文件句柄 = open('文件路徑', '模式')

打開文件時，需要指定文件路徑和以何等方式打開文件，打開后，即可獲取該文件句柄，日后通過此文件句柄對該文件操作。

打開文件的模式有：

• r，只讀模式（默認）。
• w，只寫模式。【不可讀；不存在則創建；存在則刪除內容；】
• a，追加模式。【可讀；   不存在則創建；存在則只追加內容；】

"+" 表示可以同時讀寫某個文件

• r+，可讀寫文件。【可讀；可寫；可追加】
• w+，寫讀
• a+，同a

"U"表示在讀取時，可以將 \r \n \r\n自動轉換成 \n （與 r 或 r+ 模式同使用）

• rU
• r+U

"b"表示處理二進制文件（如：FTP發送上傳ISO鏡像文件，linux可忽略，windows處理二進制文件時需標注）

• rb
• wb
• ab

二、操作

class file(object)
    def close(self): # real signature unknown; restored from __doc__
        關閉文件
        """
        close() -> None or (perhaps) an integer.  Close the file.
         
        Sets data attribute .closed to True.  A closed file cannot be used for
        further I/O operations.  close() may be called more than once without
        error.  Some kinds of file objects (for example, opened by popen())
        may return an exit status upon closing.
        """
 
    def fileno(self): # real signature unknown; restored from __doc__
        文件描述符  
         """
        fileno() -> integer "file descriptor".
         
        This is needed for lower-level file interfaces, such os.read().
        """
        return 0    
 
    def flush(self): # real signature unknown; restored from __doc__
        刷新文件內部緩沖區
        """ flush() -> None.  Flush the internal I/O buffer. """
        pass
 
 
    def isatty(self): # real signature unknown; restored from __doc__
        判斷文件是否是同意tty設備
        """ isatty() -> true or false.  True if the file is connected to a tty device. """
        return False
 
 
    def next(self): # real signature unknown; restored from __doc__
        獲取下一行數據，不存在，則報錯
        """ x.next() -> the next value, or raise StopIteration """
        pass
 
    def read(self, size=None): # real signature unknown; restored from __doc__
        讀取指定字節數據
        """
        read([size]) -> read at most size bytes, returned as a string.
         
        If the size argument is negative or omitted, read until EOF is reached.
        Notice that when in non-blocking mode, less data than what was requested
        may be returned, even if no size parameter was given.
        """
        pass
 
    def readinto(self): # real signature unknown; restored from __doc__
        讀取到緩沖區，不要用，將被遺棄
        """ readinto() -> Undocumented.  Don't use this; it may go away. """
        pass
 
    def readline(self, size=None): # real signature unknown; restored from __doc__
        僅讀取一行數據
        """
        readline([size]) -> next line from the file, as a string.
         
        Retain newline.  A non-negative size argument limits the maximum
        number of bytes to return (an incomplete line may be returned then).
        Return an empty string at EOF.
        """
        pass
 
    def readlines(self, size=None): # real signature unknown; restored from __doc__
        讀取所有數據，並根據換行保存值列表
        """
        readlines([size]) -> list of strings, each a line from the file.
         
        Call readline() repeatedly and return a list of the lines so read.
        The optional size argument, if given, is an approximate bound on the
        total number of bytes in the lines returned.
        """
        return []
 
    def seek(self, offset, whence=None): # real signature unknown; restored from __doc__
        指定文件中指針位置
        """
        seek(offset[, whence]) -> None.  Move to new file position.
         
        Argument offset is a byte count.  Optional argument whence defaults to
(offset from start of file, offset should be >= 0); other values are 1
        (move relative to current position, positive or negative), and 2 (move
        relative to end of file, usually negative, although many platforms allow
        seeking beyond the end of a file).  If the file is opened in text mode,
        only offsets returned by tell() are legal.  Use of other offsets causes
        undefined behavior.
        Note that not all file objects are seekable.
        """
        pass
 
    def tell(self): # real signature unknown; restored from __doc__
        獲取當前指針位置
        """ tell() -> current file position, an integer (may be a long integer). """
        pass
 
    def truncate(self, size=None): # real signature unknown; restored from __doc__
        截斷數據，僅保留指定之前數據
        """
        truncate([size]) -> None.  Truncate the file to at most size bytes.
         
        Size defaults to the current file position, as returned by tell().
        """
        pass
 
    def write(self, p_str): # real signature unknown; restored from __doc__
        寫內容
        """
        write(str) -> None.  Write string str to file.
         
        Note that due to buffering, flush() or close() may be needed before
        the file on disk reflects the data written.
        """
        pass
 
    def writelines(self, sequence_of_strings): # real signature unknown; restored from __doc__
        將一個字符串列表寫入文件
        """
        writelines(sequence_of_strings) -> None.  Write the strings to the file.
         
        Note that newlines are not added.  The sequence can be any iterable object
        producing strings. This is equivalent to calling write() for each string.
        """
        pass
 
    def xreadlines(self): # real signature unknown; restored from __doc__
        可用於逐行讀取文件，非全部
        """
        xreadlines() -> returns self.
         
        For backward compatibility. File objects now include the performance
        optimizations previously implemented in the xreadlines module.
        """
        pass

Python 2.x

class TextIOWrapper(_TextIOBase):
    """
    Character and line based layer over a BufferedIOBase object, buffer.
    
    encoding gives the name of the encoding that the stream will be
    decoded or encoded with. It defaults to locale.getpreferredencoding(False).
    
    errors determines the strictness of encoding and decoding (see
    help(codecs.Codec) or the documentation for codecs.register) and
    defaults to "strict".
    
    newline controls how line endings are handled. It can be None, '',
    '\n', '\r', and '\r\n'.  It works as follows:
    
    * On input, if newline is None, universal newlines mode is
      enabled. Lines in the input can end in '\n', '\r', or '\r\n', and
      these are translated into '\n' before being returned to the
      caller. If it is '', universal newline mode is enabled, but line
      endings are returned to the caller untranslated. If it has any of
      the other legal values, input lines are only terminated by the given
      string, and the line ending is returned to the caller untranslated.
    
    * On output, if newline is None, any '\n' characters written are
      translated to the system default line separator, os.linesep. If
      newline is '' or '\n', no translation takes place. If newline is any
      of the other legal values, any '\n' characters written are translated
      to the given string.
    
    If line_buffering is True, a call to flush is implied when a call to
    write contains a newline character.
    """
    def close(self, *args, **kwargs): # real signature unknown
        關閉文件
        pass

    def fileno(self, *args, **kwargs): # real signature unknown
        文件描述符  
        pass

    def flush(self, *args, **kwargs): # real signature unknown
        刷新文件內部緩沖區
        pass

    def isatty(self, *args, **kwargs): # real signature unknown
        判斷文件是否是同意tty設備
        pass

    def read(self, *args, **kwargs): # real signature unknown
        讀取指定字節數據
        pass

    def readable(self, *args, **kwargs): # real signature unknown
        是否可讀
        pass

    def readline(self, *args, **kwargs): # real signature unknown
        僅讀取一行數據
        pass

    def seek(self, *args, **kwargs): # real signature unknown
        指定文件中指針位置
        pass

    def seekable(self, *args, **kwargs): # real signature unknown
        指針是否可操作
        pass

    def tell(self, *args, **kwargs): # real signature unknown
        獲取指針位置
        pass

    def truncate(self, *args, **kwargs): # real signature unknown
        截斷數據，僅保留指定之前數據
        pass

    def writable(self, *args, **kwargs): # real signature unknown
        是否可寫
        pass

    def write(self, *args, **kwargs): # real signature unknown
        寫內容
        pass

    def __getstate__(self, *args, **kwargs): # real signature unknown
        pass

    def __init__(self, *args, **kwargs): # real signature unknown
        pass

    @staticmethod # known case of __new__
    def __new__(*args, **kwargs): # real signature unknown
        """ Create and return a new object.  See help(type) for accurate signature. """
        pass

    def __next__(self, *args, **kwargs): # real signature unknown
        """ Implement next(self). """
        pass

    def __repr__(self, *args, **kwargs): # real signature unknown
        """ Return repr(self). """
        pass

    buffer = property(lambda self: object(), lambda self, v: None, lambda self: None)  # default

    closed = property(lambda self: object(), lambda self, v: None, lambda self: None)  # default

    encoding = property(lambda self: object(), lambda self, v: None, lambda self: None)  # default

    errors = property(lambda self: object(), lambda self, v: None, lambda self: None)  # default

    line_buffering = property(lambda self: object(), lambda self, v: None, lambda self: None)  # default

    name = property(lambda self: object(), lambda self, v: None, lambda self: None)  # default

    newlines = property(lambda self: object(), lambda self, v: None, lambda self: None)  # default

    _CHUNK_SIZE = property(lambda self: object(), lambda self, v: None, lambda self: None)  # default

    _finalizing = property(lambda self: object(), lambda self, v: None, lambda self: None)  # default

Python 3.x

python:open/文件操作

open/文件操作
f=open('/tmp/hello','w')
#open(路徑+文件名,讀寫模式)
#讀寫模式:r只讀,r+讀寫,w新建(會覆蓋原有文件),a追加,b二進制文件.常用模式
如:'rb','wb','r+b'等等

讀寫模式的類型有：
rU 或 Ua 以讀方式打開, 同時提供通用換行符支持 (PEP 278)
w 　　 以寫方式打開，
a 　　 以追加模式打開 (從 EOF 開始, 必要時創建新文件)
r+ 　　以讀寫模式打開
w+　　以讀寫模式打開 (參見 w )
a+ 　   以讀寫模式打開 (參見 a )
rb 　    以二進制讀模式打開
wb　　以二進制寫模式打開 (參見 w )
ab 　   以二進制追加模式打開 (參見 a )
rb+　   以二進制讀寫模式打開 (參見 r+ )
wb+　  以二進制讀寫模式打開 (參見 w+ )
ab+ 　 以二進制讀寫模式打開 (參見 a+ )

========= ===============================================================
Character Meaning
--------- ---------------------------------------------------------------
'r'       open for reading (default)
'w'       open for writing, truncating the file first
'x'       create a new file and open it for writing
'a'       open for writing, appending to the end of the file if it exists
'b'       binary mode
't'       text mode (default)
'+'       open a disk file for updating (reading and writing)
'U'       universal newline mode (deprecated)
========= ===============================================================

注意：
1、使用'W'，文件若存在，首先要清空，然后（重新）創建，
2、使用'a'模式 ，把所有要寫入文件的數據都追加到文件的末尾，即使你使用了seek（）指向文件的其他地方，如果文件不存在，將自動被創建。

f.read([size]) size未指定則返回整個文件,如果文件大小>2倍內存則有問題.f.read()讀到文件尾時返回""(空字串)
file.readline() 返回一行
file.readline([size]) 返回包含size行的列表,size 未指定則返回全部行
for line in f: print line #通過迭代器訪問
f.write("hello\n") #如果要寫入字符串以外的數據,先將他轉換為字符串.
f.tell() 返回一個整數,表示當前文件指針的位置(就是到文件頭的比特數).
f.seek(偏移量,[起始位置])
用來移動文件指針
偏移量:單位:比特,可正可負
起始位置:0-文件頭,默認值;1-當前位置;2-文件尾
f.close() 關閉文件

#!/usr/bin/env python
# Filename: using_file.py

poem='''\Programming is funWhen the work is doneif you wanna make your work also fun: use Python!'''
f=file('poem.txt','w') # open for 'w'riting
f.write(poem) # write text to file
f.close() # close the file
f=file('poem.txt')

# if no mode is specified, 'r'ead mode is assumed by default
while True: 
line=f.readline() 
if len(line)==0: # Zero length indicates EOF 
break 
print line, 
# Notice comma to avoid automatic newline added by Python
f.close() 
# close the file

 

三、管理上下文

為了避免打開文件后忘記關閉，可以通過管理上下文，即：

with open('log','r') as f:
       
    ...

如此方式，當with代碼塊執行完畢時，內部會自動關閉並釋放文件資源。

在Python 2.7 后，with又支持同時對多個文件的上下文進行管理，即：

with open('log1') as obj1, open('log2') as obj2:
    pass